Modelling rail track deterioration and maintenance: current practices and future needs

As commercialisation and privatisation of railway systems reach the political agendas in a number of countries, including Australia, the separation of infrastructure from operating business dictates that track costs need to be shared on an equitable basis. There is also a world-wide trend towards increased pressures on rail track infrastructure through increases in axle loads and train speeds. Such productivity and customer service driven pressures inevitably lead to reductions in the life of track components and increases in track maintenance costs. This paper provides a state-of-the-art review of track degradation modeling, as well as an overview of track maintenance decision support systems currently in use in North America and Europe. The essential elements of a maintenance optimisation model currently under development are also highlighted

Road network maintenance and repair considering day-to-day traffic dynamics and transient congestion

Road maintenance and repair (M&R) are essential for keeping the performance of traffic infrastructure at a satisfactory level, and extending their lifetime to the fullest extent possible. For road networks, effective M&R plans should not be constructed in a myopic or ad-hoc fashion regardless of the subsequent benefits and costs associated with those projects considered. A hallmark of road M&R studies is the use of user equilibrium (UE) models to predict network traffic for a given set of road conditions with or without M&R. However, UE approaches ignore the traffic disequilibrium states and transient congestion as a result of M&R derived disruptions to network traffic on a day-to-day (DTD) time scale, which could produce additional substantial travel costs. As shown in the numerical studies on a M&R plan of the Sioux Falls network, the additional maintenance derived travel cost is about 4 billion, which is far exceed the actual M&R construction cost of 0.2 billion. Therefore, it is necessary to recognise the substantial social costs induced by maintenance-derived disruptions in the form of transient congestion when planning M&R. This realistic and pressing issue is not properly addressed by the road M&R planning problems with traffic equilibrium constraints. This thesis proposes a dual-time-scale road network M&R model aiming to simultaneously capture the long-term effects of M&R activities under traffic equilibria, and the maintenance-derived transient congestion using day-to-day (DTD) traffic evolutionary dynamics. The notion of ‘day’ is arbitrarily defined (e.g. weeks or months). The proposed M&R model consists of three sub-models: (1) a within-day dynamic network loading (DNL) model; (2) a day-to-day dynamic traffic assignment (DTD DTA) model; and (3) a day-to-day road quality model. The within-day traffic dynamics is captured by the Lighthill-Whitham-Richards (LWR) fluid dynamic network loading model. The day-to-day phase of the traffic dynamics specify travellers’ route and departure time choices in a stochastic manner based on a sequential mixed multinomial or nested Logit model. Travel information sharing behaviour is further integrated into this macroscopic doubly dynamic (both within-day and day-to-day dynamic) traffic assignment (DDTA) model to account for the impact of incomplete information on travel experiences. A deterministic day-to-day road quality model based on an exponential form of traffic flow is employed to govern the road deterioration process, where a quarter-car index (QI) is applied. All these dynamics are incorporated in a holistic dual-time-scale M&R model, which captures realistic phenomena associated with short-term and long-term effects of M&R, including physical queuing and spillback, road capacity reduction, temporal-spatial shift of congestion due to on-going M&R activities, and the tendency to converge to an equilibrium after M&R actions. Following the dual-time-scale road network M&R model, a bi-level road M&R optimisation model is proposed, where the aforementioned three sub-models are incorporated into the lower-level problem, while the upper-level is to minimise M&R expenditure and network travel costs while maintaining a satisfactory level of road quality. The M&R planning horizon is long yet finite (e.g. years or decades). A ‘quality-usage’ feedback mechanism is investigated in the proposed bi-level M&R model, namely, (1) the DTD road quality evolution as a result of DTD traffic loads and the M&R effectiveness; and (2) the evolution of DTD traffic in response to both DTD road deterioration and the improved road quality after M&R activities. The effectiveness of developed M&R optimisation model is demonstrated through case studies on the Sioux Falls network. A metaheuristic Genetic Algorithm (GA) approach is employed to solve the M&R problems given its highly nonlinear, nonconvex and non-differentiable nature. Explicit travellers’ choice behaviour dynamics and complex traffic phenomena such as network paradoxes arising from M&R activities are illustrated. Through a comparison with the results under the dynamic user equilibrium (DUE) method, the proposed DTD method achieves significant reduction in network travel cost of $ 25 million, approximately 20% of the total cost. This points to the benefit of using the DTD dynamics for capturing network’s responses to M&R in a more realistic way. The M&R model proposed in this thesis could provide valuable managerial insights for road M&R planning agencies.Open Acces

The impact of vehicle movement on exploitation parameters of roads and runways: a short review of the special issue

"The impact of vehicle movement on exploitation parameters of roads and runways: a short review of the special issue" Transport, 31(2), p. 127-13

Improving productivity of road surfacing operations using value stream mapping and discrete event simulation

The Highways Infrastructure is one of the most valuable asset owned by the public sector. Efficient operations of Highways have the success of national and local economies as well as the quality of life of the general public, dependent on it. Ensuring smooth traffic operations requires maintenance and improvements of the highest standard. This research investigates integration of Discrete Event Simulation (DES) and Value Stream mapping (VSM) to enhance the productivity of the delivery of road surfacing operations by achieving higher production rates and minimum road closure times. Research approach involved use of primary data, collected from direct observation, interviews, review of archival records and productivity databases. Based on this, process maps and value stream maps were developed, which were subsequently used to produce discrete event simulation models, for exploration of different optimisation scenarios

Sustainable urban transport development : a dynamic optimisation approach

Current transport systems and transport planning methods and models are not necessarily compatible with the requirements of sustainable transport development. Adequate transport systems can only be obtained by use of a sustainable transport paradigm and accompanying analytical framework. Therefore, this thesis presents a theoretical framework, which is based on a paradigm for sustainable transport development. This paradigm advocates a comprehensive decision-making that anticipates and manages scarce resource use, including environment and finance, while developing the transport system in terms of quality of access and/or person throughput

Performance and Safety Enhancement Strategies in Vehicle Dynamics and Ground Contact

Recent trends in vehicle engineering are testament to the great efforts that scientists and industries have made to seek solutions to enhance both the performance and safety of vehicular systems. This Special Issue aims to contribute to the study of modern vehicle dynamics, attracting recent experimental and in-simulation advances that are the basis for current technological growth and future mobility. The area involves research, studies, and projects derived from vehicle dynamics that aim to enhance vehicle performance in terms of handling, comfort, and adherence, and to examine safety optimization in the emerging contexts of smart, connected, and autonomous driving.This Special Issue focuses on new findings in the following topics:(1) Experimental and modelling activities that aim to investigate interaction phenomena from the macroscale, analyzing vehicle data, to the microscale, accounting for local contact mechanics; (2) Control strategies focused on vehicle performance enhancement, in terms of handling/grip, comfort and safety for passengers, motorsports, and future mobility scenarios; (3) Innovative technologies to improve the safety and performance of the vehicle and its subsystems; (4) Identification of vehicle and tire/wheel model parameters and status with innovative methodologies and algorithms; (5) Implementation of real-time software, logics, and models in onboard architectures and driving simulators; (6) Studies and analyses oriented toward the correlation among the factors affecting vehicle performance and safety; (7) Application use cases in road and off-road vehicles, e-bikes, motorcycles, buses, trucks, etc

Alignment model for trunk road network maintenance outsourcing

Road maintenance outsourcing is now the foremost strategy by which road authorities procure maintenance works. Despite growing application of road maintenance outsourcing, there are conflicting estimates on the effective­ness of road maintenance outsourcing and shortage of appropriate models to align over optimistic expectations of road authorities from road maintenance outsourcing with substantiated benefits. This paper investigates the efficacy of road maintenance outsourcing. In this paper, the different variants of road maintenance outsourcing and road maintenance works are evaluated with a SWOT analysis and a comprehensive literature review respectively. In addition, a road main­tenance outsourcing alignment model based on a decision tree and Balance Score Card is proposed and illustrated with a Nigerian trunk road network authority as a case study. The result of the SWOT analysis and comprehensive literature review establishes fresh insight into road maintenance outsourcing dynamics. The presented road maintenance outsourc­ing alignment model provides adequate pathways that could assist road authorities identify the most appropriate road maintenance outsourcing variant for road maintenance procurement. In addition it aligns actual benefits and expectations of road maintenance outsourcing and facilitates development of SMART metrics for effective assessment of road main­tenance outsourcing. The proposed model is applicable across other infrastructures. First published online: 01 Sep 201

Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical University; [and] Low Carbon Buildings and Communities in the Sustainable Built Environment, 23-25 February 2015, Istanbul Technical University

As the world’s living conditions are deteriorating, the need for the regenerative and sustainable built environment is increasing. Establishment of the regenerative and sustainable built environment requires interdisciplinary work and research. For this reason, our workshop “Low carbon Buildings and Communities in the Sustainable Built Environment” supported by the British Council Researcher Links as well as our workshop “Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects” supported by the Turkish Science Foundation (TÜBİTAK) play an important role in bringing the academics from various disciplines together. This workshop proceedings book provides the proceedings of these two workshops

State of the art in simulation-based optimisation for maintenance systems

Recently, more attention has been directed towards improving and optimising maintenance in manufacturing systems using simulation. This paper aims to report the state of the art in simulation-based optimisation of maintenance by systematically classifying the published literature and outlining main trends in modelling and optimising maintenance systems. The authors investigate application areas and published real case studies as well as researched maintenance strategies and policies. Much of the research in this area is focusing on preventive maintenance and optimising preventive maintenance frequency that will lead to the minimum cost. Discrete event simulation was the most reported technique to model maintenance systems whereas modern optimisation methods such as Genetic Algorithms was the most reported optimisation method in the literature. On this basis, the paper identifies the current gaps and discusses future prospects. Further research can be done to develop a framework that guides the experimenting process with different maintenance strategies and policies. More real case studies can be conducted on multi-objective optimisation and condition based maintenance especially in a production context

A survey of AI in operations management from 2005 to 2009

Purpose: the use of AI for operations management, with its ability to evolve solutions, handle uncertainty and perform optimisation continues to be a major field of research. The growing body of publications over the last two decades means that it can be difficult to keep track of what has been done previously, what has worked, and what really needs to be addressed. Hence this paper presents a survey of the use of AI in operations management aimed at presenting the key research themes, trends and directions of research. Design/methodology/approach: the paper builds upon our previous survey of this field which was carried out for the ten-year period 1995-2004. Like the previous survey, it uses Elsevier’s Science Direct database as a source. The framework and methodology adopted for the survey is kept as similar as possible to enable continuity and comparison of trends. Thus, the application categories adopted are: design; scheduling; process planning and control; and quality, maintenance and fault diagnosis. Research on utilising neural networks, case-based reasoning (CBR), fuzzy logic (FL), knowledge-Based systems (KBS), data mining, and hybrid AI in the four application areas are identified. Findings: the survey categorises over 1,400 papers, identifying the uses of AI in the four categories of operations management and concludes with an analysis of the trends, gaps and directions for future research. The findings include: the trends for design and scheduling show a dramatic increase in the use of genetic algorithms since 2003 that reflect recognition of their success in these areas; there is a significant decline in research on use of KBS, reflecting their transition into practice; there is an increasing trend in the use of FL in quality, maintenance and fault diagnosis; and there are surprising gaps in the use of CBR and hybrid methods in operations management that offer opportunities for future research. Design/methodology/approach: the paper builds upon our previous survey of this field which was carried out for the 10 year period 1995 to 2004 (Kobbacy et al. 2007). Like the previous survey, it uses the Elsevier’s ScienceDirect database as a source. The framework and methodology adopted for the survey is kept as similar as possible to enable continuity and comparison of trends. Thus the application categories adopted are: (a) design, (b) scheduling, (c) process planning and control and (d) quality, maintenance and fault diagnosis. Research on utilising neural networks, case based reasoning, fuzzy logic, knowledge based systems, data mining, and hybrid AI in the four application areas are identified. Findings: The survey categorises over 1400 papers, identifying the uses of AI in the four categories of operations management and concludes with an analysis of the trends, gaps and directions for future research. The findings include: (a) The trends for Design and Scheduling show a dramatic increase in the use of GAs since 2003-04 that reflect recognition of their success in these areas, (b) A significant decline in research on use of KBS, reflecting their transition into practice, (c) an increasing trend in the use of fuzzy logic in Quality, Maintenance and Fault Diagnosis, (d) surprising gaps in the use of CBR and hybrid methods in operations management that offer opportunities for future research. Originality/value: This is the largest and most comprehensive study to classify research on the use of AI in operations management to date. The survey and trends identified provide a useful reference point and directions for future research