Ultra Wideband

Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations

Técnicas de pré-codificação para sistemas multicelulares coordenados

Doutoramento em TelecomunicaçõesCoordenação Multicélula é um tópico de investigação em rápido crescimento e uma solução promissora para controlar a interferência entre células em sistemas celulares, melhorando a equidade do sistema e aumentando a sua capacidade. Esta tecnologia já está em estudo no LTEAdvanced sob o conceito de coordenação multiponto (COMP). Existem várias abordagens sobre coordenação multicélula, dependendo da quantidade e do tipo de informação partilhada pelas estações base, através da rede de suporte (backhaul network), e do local onde essa informação é processada, i.e., numa unidade de processamento central ou de uma forma distribuída em cada estação base. Nesta tese, são propostas técnicas de pré-codificação e alocação de potência considerando várias estratégias: centralizada, todo o processamento é feito na unidade de processamento central; semidistribuída, neste caso apenas parte do processamento é executado na unidade de processamento central, nomeadamente a potência alocada a cada utilizador servido por cada estação base; e distribuída em que o processamento é feito localmente em cada estação base. Os esquemas propostos são projectados em duas fases: primeiro são propostas soluções de pré-codificação para mitigar ou eliminar a interferência entre células, de seguida o sistema é melhorado através do desenvolvimento de vários esquemas de alocação de potência. São propostas três esquemas de alocação de potência centralizada condicionada a cada estação base e com diferentes relações entre desempenho e complexidade. São também derivados esquemas de alocação distribuídos, assumindo que um sistema multicelular pode ser visto como a sobreposição de vários sistemas com uma única célula. Com base neste conceito foi definido uma taxa de erro média virtual para cada um desses sistemas de célula única que compõem o sistema multicelular, permitindo assim projectar esquemas de alocação de potência completamente distribuídos. Todos os esquemas propostos foram avaliados em cenários realistas, bastante próximos dos considerados no LTE. Os resultados mostram que os esquemas propostos são eficientes a remover a interferência entre células e que o desempenho das técnicas de alocação de potência propostas é claramente superior ao caso de não alocação de potência. O desempenho dos sistemas completamente distribuídos é inferior aos baseados num processamento centralizado, mas em contrapartida podem ser usados em sistemas em que a rede de suporte não permita a troca de grandes quantidades de informação.Multicell coordination is a promising solution for cellular wireless systems to mitigate inter-cell interference, improving system fairness and increasing capacity and thus is already under study in LTE-A under the coordinated multipoint (CoMP) concept. There are several coordinated transmission approaches depending on the amount of information shared by the transmitters through the backhaul network and where the processing takes place i.e. in a central processing unit or in a distributed way on each base station. In this thesis, we propose joint precoding and power allocation techniques considering different strategies: Full-centralized, where all the processing takes place at the central unit; Semi-distributed, in this case only some process related with power allocation is done at the central unit; and Fulldistributed, where all the processing is done locally at each base station. The methods are designed in two phases: first the inter-cell interference is removed by applying a set of centralized or distributed precoding vectors; then the system is further optimized by centralized or distributed power allocation schemes. Three centralized power allocation algorithms with per-BS power constraint and different complexity tradeoffs are proposed. Also distributed power allocation schemes are proposed by considering the multicell system as superposition of single cell systems, where we define the average virtual bit error rate (BER) of interference-free single cell system, allowing us to compute the power allocation coefficients in a distributed manner at each BS. All proposed schemes are evaluated in realistic scenarios considering LTE specifications. The numerical evaluations show that the proposed schemes are efficient in removing inter-cell interference and improve system performance comparing to equal power allocation. Furthermore, fulldistributed schemes can be used when the amounts of information to be exchanged over the backhaul is restricted, although system performance is slightly degraded from semi-distributed and full-centralized schemes, but the complexity is considerably lower. Besides that for high degrees of freedom distributed schemes show similar behaviour to centralized ones

Characterization and optimization of MIMO systems

In recent years demand for wireless products and networks has experienced substantial growth in the area of digital communications, evolving from novelty into necessity. The deployment has been remarkable in the new generation of IEEE 802.11n-based Wi-Fi technology, which has introduced several enhancements in wireless LAN performance. The most significant innovation has been the introduction of MIMO (multiple-input-multiple-output) interface. MIMO employs an antenna system with multiple transmitters and receivers, improving RF signal quality and increasing efficiency, reliability and throughput. This technology implements advanced signal processing and modulation techniques, added to exploit multiple antennas and wider channels. The potential of MIMO systems bring along several topics. One of these is the choice of design parameters, like, for example, symbol rate, modulation and coding, constellation size and many other. Since the propagation situation can quickly changes, the performance of MIMO systems is determined by its ability to adapt to the changing channel conditions. Thus sophisticated techniques have been proposed to improve the data rate by adapting some of these parameters to the time-varying channel. Another major question is figuring out the ways multiple antennas should be positioned for uncorrelated reception. Due to the fact that antenna elements and propagation channel interact in MIMO systems, the array arrangement strongly influences performance. The configuration has to be chosen carefully with the aim of getting high efficiency in terms of power and a low correlation by exploiting various propagation paths

Advanced receiver structures for mobile MIMO multicarrier communication systems

Beyond third generation (3G) and fourth generation (4G) wireless communication systems are targeting far higher data rates, spectral efficiency and mobility requirements than existing 3G networks. By using multiple antennas at the transmitter and the receiver, multiple-input multiple-output (MIMO) technology allows improving both the spectral efficiency (bits/s/Hz), the coverage, and link reliability of the system. Multicarrier modulation such as orthogonal frequency division multiplexing (OFDM) is a powerful technique to handle impairments specific to the wireless radio channel. The combination of multicarrier modulation together with MIMO signaling provides a feasible physical layer technology for future beyond 3G and fourth generation communication systems. The theoretical benefits of MIMO and multicarrier modulation may not be fully achieved because the wireless transmission channels are time and frequency selective. Also, high data rates call for a large bandwidth and high carrier frequencies. As a result, an important Doppler spread is likely to be experienced, leading to variations of the channel over very short period of time. At the same time, transceiver front-end imperfections, mobility and rich scattering environments cause frequency synchronization errors. Unlike their single-carrier counterparts, multi-carrier transmissions are extremely sensitive to carrier frequency offsets (CFO). Therefore, reliable channel estimation and frequency synchronization are necessary to obtain the benefits of MIMO OFDM in mobile systems. These two topics are the main research problems in this thesis. An algorithm for the joint estimation and tracking of channel and CFO parameters in MIMO OFDM is developed in this thesis. A specific state-space model is introduced for MIMO OFDM systems impaired by multiple carrier frequency offsets under time-frequency selective fading. In MIMO systems, multiple frequency offsets are justified by mobility, rich scattering environment and large angle spread, as well as potentially separate radio frequency - intermediate frequency chains. An extended Kalman filter stage tracks channel and CFO parameters. Tracking takes place in time domain, which ensures reduced computational complexity, robustness to estimation errors as well as low estimation variance in comparison to frequency domain processing. The thesis also addresses the problem of blind carrier frequency synchronization in OFDM. Blind techniques exploit statistical or structural properties of the OFDM modulation. Two novel approaches are proposed for blind fine CFO estimation. The first one aims at restoring the orthogonality of the OFDM transmission by exploiting the properties of the received signal covariance matrix. The second approach is a subspace algorithm exploiting the correlation of the channel frequency response among the subcarriers. Both methods achieve reliable estimation of the CFO regardless of multipath fading. The subspace algorithm needs extremely small sample support, which is a key feature in the face of time-selective channels. Finally, the Cramér-Rao (CRB) bound is established for the problem in order to assess the large sample performance of the proposed algorithms.reviewe

Performance of a Busy-Tone Approach on 802.11 Wireless Network

The big evolution of modem applications in the wireless networks domain as the wireless videos remote access, big files transfer, streaming and downloading high definition videos etc, has led to using the mmWave technology (60 GHz for example) that represents an important solution for the se applications because of the advantages presented by this frequency band such as the high data rate transmission up to multi gigabits, also the large bandwidth that goes up to 7 GHz. The use of the mm Wave technology requires a MAC protocol which ensures the channel sharing between users in a multi-node network, with directional antennas that increase spatial reuse and cover a wider area compared to the omnidirecti on al antennas. Many access method approaches were used in order to resolve these problems, for instance, the methods that use a signaling channel, then methods that exploit directional antennas with directional frames, and those using beacons and many others .... In our project, we worked on the adaptation of the 'Busy - Tone' method using the 802.11 ad protocol with directional antennas in addition to a coordination between 2.4 GHz and 60 GHz. This method offers a big solution to resolve the collisions of data and control packets that affect and reduce the network capacity and lead to data loss. Simulation results showed the efficiency of this model by reducing collisions caused by hidden terminais, therefore, enhancing the performance of the network in terms oftransmission delay, retransmission attempts and throughput. L'évolution des applications modernes dans le domaine des réseaux sans fils tel que 1 'accès à distance des vidéos sans fils, le transfert des gros fichiers, flux des vidéos à haute définition etc .... nécessite l'utilisation de la bande 60 GHz qui présente une solution très importante pour ces applications grâce aux avantages que présente cette bande tel que le taux de transmission des données qui atteint quelques Gigabits, et aussi grâce à la bande passante du canal qui est environ 7 GHz. L'utilisation de cette bande de fréquence nécessite un protocole MAC qui assure le partage de canal entre les utilisateurs dans un réseau multi-noeuds. Ce protocole doit tenir compte les problèmes et les défis qui se produisent grâce à l'utilisation de la bande 60 GHz, tel que les problèmes des terminales cachées et exposées Dans ce projet on a proposé une méthode qui se base sur l'adaptation de protocole 802.llad avec la méthode 'Busy-Tone 'parce qu'elle représente la solution la plus efficace pour résoudre les problèmes des collisions des paquets de donnés et les paquets de contrôle qui sont causés normalement par la présence des terminales cachées et exposées. L'approche proposée consiste aussi à utiliser les antennes directives qm augmentent la réutilisation spatiale et couvre une portée plus grande par rapport à l'antenne omnidirectionnelle. Ces antennes ont été utilisées à côté des antennes omnidirectionnelles avec une coordination entre les deux, alors les antennes omnidirectionnelles sont utilisées pour envoyer les signaux 'Busy-Tone ' tandis que les antennes directives sont utilisées pour envoyer les paquets de données. Les résultats de la simulation ont montré une amélioration au niveau de la performance du réseau en terme du débit, du délai et les essaies de retransmission en comparant avec le standard 801.11ad. La mise en oeuvre est effectuée dans le logiciel Matlab/Simulink. Les paramètres utilisés dans les simulations sont des valeurs typiques des centrales existantes ou prises dans la littérature. La conformité avec la littérature est réalisée grâce à une validation croisée progressive de chaque sous-ensemble et du système globa

Mobile and Wireless Communications

Mobile and Wireless Communications have been one of the major revolutions of the late twentieth century. We are witnessing a very fast growth in these technologies where mobile and wireless communications have become so ubiquitous in our society and indispensable for our daily lives. The relentless demand for higher data rates with better quality of services to comply with state-of-the art applications has revolutionized the wireless communication field and led to the emergence of new technologies such as Bluetooth, WiFi, Wimax, Ultra wideband, OFDMA. Moreover, the market tendency confirms that this revolution is not ready to stop in the foreseen future. Mobile and wireless communications applications cover diverse areas including entertainment, industrialist, biomedical, medicine, safety and security, and others, which definitely are improving our daily life. Wireless communication network is a multidisciplinary field addressing different aspects raging from theoretical analysis, system architecture design, and hardware and software implementations. While different new applications are requiring higher data rates and better quality of service and prolonging the mobile battery life, new development and advanced research studies and systems and circuits designs are necessary to keep pace with the market requirements. This book covers the most advanced research and development topics in mobile and wireless communication networks. It is divided into two parts with a total of thirty-four stand-alone chapters covering various areas of wireless communications of special topics including: physical layer and network layer, access methods and scheduling, techniques and technologies, antenna and amplifier design, integrated circuit design, applications and systems. These chapters present advanced novel and cutting-edge results and development related to wireless communication offering the readers the opportunity to enrich their knowledge in specific topics as well as to explore the whole field of rapidly emerging mobile and wireless networks. We hope that this book will be useful for students, researchers and practitioners in their research studies