Mobile optical wireless system using fast beam Angle, delay and power adaptation with angle diversity receivers

In this paper, we introduce a novel fast angle and power adaptation method in optical wireless (OW) systems. The fast angle and power adaptive line strip multibeam system (FAPA-LSMS) can identify the optimum spots distribution based on a divide and conquer (D&C) algorithm and can achieve a signal-to-noise ratio (SNR) performance comparable to that obtained using the normal APA-LSMS. This results in a significant reduction in the system adaptation time by a factor of 20. The proposed FAPA system makes use of delay adaptation to minimize the delay spread at the receiver. A significant reduction in the delay spread by a factor of 50 can be achieved compared to the non-adaptive LSMS. The proposed system improves the SNR by 50 dB over a conventional diffuse system

Collaborative Adaptive Optical Wireless System in Realistic Indoor Environment

In this paper, we propose and evaluate a collaborative mobile optical wireless (OW) system that employs a collaborative adaptive beam clustering method (CABCM) in conjunction with an imaging receiver. Three cases involving two, three and five receivers are considered. A collaborative maximum ratio combining scheme is used to collaboratively distribute the transmit power among the diffusing spots. Our ultimate goal is to increase the received optical power and improve the signal-to-noise ratio (SNR) at each coexisting receiver when the system operates in a multiuser scenario under the constraints of background noise, multipath dispersion, mobility and shadowing typical in a real indoor environment. Our proposed system (collaborative adaptive beam clustering method) is evaluated at 30 Mbit/s to enable comparison with previous work, and is also assessed at higher bit rates: 2.5 Gbit/s and 5 Gbit/s. Simulation results show that the mobile CABCM system offers a significant performance improvement including a reduction in the background noise (BN) effect, a strong received power, reduction in delay spread, and improvement in the SNR over multiuser line strip multibeam system (LSMS). However, the performance degrades gradually with increase in the number of users

Bit error performance of diffuse indoor optical wireless channel pulse position modulation system employing artificial neural networks for channel equalisation

The bit-error rate (BER) performance of a pulse position modulation (PPM) scheme for non-line-of-sight indoor optical links employing channel equalisation based on the artificial neural network (ANN) is reported. Channel equalisation is achieved by training a multilayer perceptrons ANN. A comparative study of the unequalised `soft' decision decoding and the `hard' decision decoding along with the neural equalised `soft' decision decoding is presented for different bit resolutions for optical channels with different delay spread. We show that the unequalised `hard' decision decoding performs the worst for all values of normalised delayed spread, becoming impractical beyond a normalised delayed spread of 0.6. However, `soft' decision decoding with/without equalisation displays relatively improved performance for all values of the delay spread. The study shows that for a highly diffuse channel, the signal-to-noise ratio requirement to achieve a BER of 10−5 for the ANN-based equaliser is ~10 dB lower compared with the unequalised `soft' decoding for 16-PPM at a data rate of 155 Mbps. Our results indicate that for all range of delay spread, neural network equalisation is an effective tool of mitigating the inter-symbol interference

Hologram selection in realistic indoor optical wireless systems with angle diversity receivers

In this paper, we introduce a new adaptive optical wireless system that employs a finite vocabulary of stored holograms. We propose a fast delay, angle, and power adaptive holograms (FDAPA-Holograms) approach based on a divide and conquer (DandC) methodology and evaluate it with angle diversity receivers in a mobile optical wireless system. The ultimate goal is to increase the signal-to-noise ratio (SNR), reduce the effect of intersymbol interference, and eliminate the need to calculate the hologram at each transmitter and receiver location. A significant improvement is achieved in the presence of demanding background illumination noise, receiver noise, multipath propagation, mobility, and shadowing typical in a realistic indoor environment. The combination of beam delay, angle, and power adaptation offers additional degrees of freedom in the link design, resulting in a system that is able to achieve higher data rates (5 Gb/s). At a higher data rate of 5 Gb/s and under eye safety regulations, the proposed FDAPA-Holograms system offers around 13 dB SNR with full mobility in a realistic environment where shadowing exists. The fast search algorithm introduced that is based on a D&C algorithm reduces the computation time required to identify the optimum hologram. Simulation results show that the proposed system, FDAPA-Holograms, can reduce the time required to identify the optimum hologram position from 64 ms taken by a classic adaptive hologram to about 14 ms

MIMO MC-CDMA systems over indoor optical wireless communication channels

Optical wireless communication systems offer a number of advantages over their radio frequency counterparts. The advantages include freedom from fading, freedom from spectrum regulations and abundant bandwidth. The main limitations of optical wireless systems include background noise attributed to natural and artificial light sources and multipath propagation. The former degrades the signal to noise ratio while the latter limits the maximum achievable data rate. This thesis investigates the use of transmit power adaptation in the design of optical wireless spot-diffusing systems to increase the power associated with the main impulse response components, resulting in a compact impulse response and a system that is able to achieve higher data rates. The work also investigates the use of imaging diversity receivers that can reject the background noise components received in directions not associated with the signal. The two techniques help improve the optical wireless system performance. The multibeam transmitter and the multi-detector angle diversity receiver or imaging receiver form a multiple input multiple output (MIMO) system. The work also investigates additional methods that can improve the performance such as transmitter beam angle adaptation, and improved modulation and coding in the form of multi-carrier code division multiple access (MC-CDMA). Furthermore, the work investigates the robustness of a link design that adopts the combination of these methods in a realistic environment with full mobility.EThOS - Electronic Theses Online ServiceGBUnited Kingdo