An Efficient Method for GPS Multipath Mitigation Using the Teager-Kaiser-Operator-based MEDLL

An efficient method for GPS multipath mitigation is proposed. The motivation for this proposed method is to integrate the Teager-Kaiser Operator (TKO) with the Multipath Estimating Delay Lock Loop (MEDLL) module to mitigate the GPS multipath efficiently. The general implementation process of the proposed method is that we first utilize the TKO to operate on the received signal’s Auto-Correlation Function (ACF) to get an initial estimate of the multipaths. Then we transfer the initial estimated results to the MEDLL module for a further estimation. Finally, with a few iterations which are less than those of the original MEDLL algorithm, we can get a more accurate estimate of the Line-Of-Sight (LOS) signal, and thus the goal of the GPS multipath mitigation is achieved. The simulation results show that compared to the original MEDLL algorithm, the proposed method can reduce the computation load and the hardware and/or software consumption of the MEDLL module, meanwhile, without decreasing the algorithm accuracy

Interference suppression and parameter estimation in wireless communication systems over time-varing multipath fading channels

This dissertation focuses on providing solutions to two of the most important problems in wireless communication systems design, namely, 1) the interference suppression, and 2) the channel parameter estimation in wireless communication systems over time-varying multipath fading channels. We first study the interference suppression problem in various communication systems under a unified multirate transmultiplexer model. A state-space approach that achieves the optimal realizable equalization (suppression of inter-symbol interference) is proposed, where the Kalman filter is applied to obtain the minimum mean squared error estimate of the transmitted symbols. The properties of the optimal realizable equalizer are analyzed. Its relations with the conventional equalization methods are studied. We show that, although in general a Kalman filter has an infinite impulse response, the Kalman filter based decision-feedback equalizer (Kalman DFE) is a finite length filter. We also propose a novel successive interference cancellation (SIC) scheme to suppress the inter-channel interference encountered in multi-input multi-output systems. Based on spatial filtering theory, the SIC scheme is again converted to a Kalman filtering problem. Combining the Kalman DFE and the SIC scheme in series, the resultant two-stage receiver achieves optimal realizable interference suppression. Our results are the most general ever obtained, and can be applied to any linear channels that have a state-space realization, including time-invariant, time-varying, finite impulse response, and infinite impulse response channels. The second half of the dissertation devotes to the parameter estimation and tracking of single-input single-output time-varying multipath channels. We propose a novel method that can blindly estimate the channel second order statistics (SOS). We establish the channel SOS identifiability condition and propose novel precoder structures that guarantee the blind estimation of the channel SOS and achieve diversities. The estimated channel SOS can then be fit into a low order autoregressive (AR) model characterizing the time evolution of the channel impulse response. Based on this AR model, a new approach to time-varying multipath channel tracking is proposed

Velocity Determination for an Inverted Pseudolite Navigation Reference System

As navigation systems continue to improve in performance and features, the Air Force must develop better Navigation Reference Systems (NRS) to keep pace with technology. Specifically, with the advent of enhanced, integrated Global Positioning System (GPS) and Inertial Navigation System (INS) navigators, emphasis is placed on the measuring performance in the presence of GPS jamming. To meet these needs, a new NRS, dubbed the Sub-Meter Accuracy Reference System (SARS), is being developed by the 746th Test Squadron, Holloman AFB, New Mexico. SARS uses a unique, inverted GPS pseudolite positioning system to determine a reference trajectory. This research investigates two post processing methods of determining velocity from a discrete position data at a constant data rate. The first method employs numerical differentiation along with digital filters provide noise reduction. The second method uses kinematic model based Kalman filter and smoothing to determine the reference velocity

Techniques to Improve the Efficiency of Data Transmission in Cable Networks

The cable television (CATV) networks, since their introduction in the late 1940s, have now become a crucial part of the broadcasting industry. To keep up with growing demands from the subscribers, cable networks nowadays not only provide television programs but also deliver two-way interactive services such as telephone, high-speed Internet and social TV features. A new standard for CATV networks is released every five to six years to satisfy the growing demands from the mass market. From this perspective, this thesis is concerned with three main aspects for the continuing development of cable networks: (i) efficient implementations of backward-compatibility functions from the old standard, (ii) addressing and providing solutions for technically-challenging issues in the current standard and, (iii) looking for prospective features that can be implemented in the future standard. Since 1997, five different versions of the digital CATV standard had been released in North America. A new standard often contains major improvements over the previous one. The latest version of the standard, namely DOCSIS 3.1 (released in late 2013), is packed with state-of-the-art technologies and allows approximately ten times the amount of traffic as compared to the previous standard, DOCSIS 3.0 (released in 2008). Backward-compatibility is a must-have function for cable networks. In particular, to facilitate the system migration from older standards to a newer one, the backward compatible functions in the old standards must remain in the newer-standard products. More importantly, to keep the implementation cost low, the inherited backward compatible functions must be redesigned by taking advantage of the latest technology and algorithms. To improve the backward-compatibility functions, the first contribution of the thesis focuses on redesigning the pulse shaping filter by exploiting infinite impulse response (IIR) filter structures as an alternative to the conventional finite impulse response (FIR) structures. Comprehensive comparisons show that more economical filters with better performance can be obtained by the proposed design algorithm, which considers a hybrid parameterization of the filter's transfer function in combination with a constraint on the pole radius to be less than 1. The second contribution of the thesis is a new fractional timing estimation algorithm based on peak detection by log-domain interpolation. When compared with the commonly-used timing detection method, which is based on parabolic interpolation, the proposed algorithm yields more accurate estimation with a comparable implementation cost. The third contribution of the thesis is a technique to estimate the multipath channel for DOCSIS 3.1 cable networks. DOCSIS 3.1 is markedly different from prior generations of CATV networks in that OFDM/OFDMA is employed to create a spectrally-efficient signal. In order to effectively demodulate such a signal, it is necessary to employ a demodulation circuit which involves estimation and tracking of the multipath channel. The estimation and tracking must be highly accurate because extremely dense constellations such as 4096-QAM and possibly 16384-QAM can be used in DOCSIS 3.1. The conventional OFDM channel estimators available in the literature either do not perform satisfactorily or are not suitable for the DOCSIS 3.1 channel. The novel channel estimation technique proposed in this thesis iteratively searches for parameters of the channel paths. The proposed technique not only substantially enhances the channel estimation accuracy, but also can, at no cost, accurately identify the delay of each echo in the system. The echo delay information is valuable for proactive maintenance of the network. The fourth contribution of this thesis is a novel scheme that allows OFDM transmission without the use of a cyclic prefix (CP). The structure of OFDM in the current DOCSIS 3.1 does not achieve the maximum throughput if the channel has multipath components. The multipath channel causes inter-symbol-interference (ISI), which is commonly mitigated by employing CP. The CP acts as a guard interval that, while successfully protecting the signal from ISI, reduces the transmission throughput. The problem becomes more severe for downstream direction, where the throughput of the entire system is determined by the user with the worst channel. To solve the problem, this thesis proposes major alterations to the current DOCSIS 3.1 OFDM/OFDMA structure. The alterations involve using a pair of Nyquist filters at the transceivers and an efficient time-domain equalizer (TEQ) at the receiver to reduce ISI down to a negligible level without the need of CP. Simulation results demonstrate that, by incorporating the proposed alterations to the DOCSIS 3.1 down-link channel, the system can achieve the maximum throughput over a wide range of multipath channel conditions

Performance Evaluation of Adaptive Equalizer in a Communication System

This project deals with the study of the various kinds of interferences in a communication channel viz. Inter symbol Interference, Multipath Interference and Additive Interference. It deals with the design of an Adaptive Equalizer. The idea of the equalizer is to build (another) filter in the receiver that counteracts the effect of the channel. In essence, the equalizer must “unscatter” the impulse response. This can be stated as the goal of designing the equalizer E so that the impulse response of the combined channel and equalizer CE has a single spike. This can be solved using different techniques. In this project, we have implemented an ‘Adaptive Equalizer’ using four different algorithms in Matlab. We have suggested different ways to decide the coefficients of the equalizer. The first procedure (LEAST SQUARE ALGORITHM) minimizes the square of the symbol recovery error over a block of data which can be done by using matrix pseudo inversion. The second method (LEAST MEAN SQUARE ALGORITHM) involves minimizing the square of the error between the received data values and the transmitted values which are achieved via an adaptive element. The third method (DECISION DIRECTED ALGORITHM) and the fourth method (DISPERSION MINIMIZING ALGORITHM) are used when there is no training sequence and other performance functions are appropriate. In addition to this we have undertaken a study and realization of the Bit Error Rate of a communication system using VisSim Software

Narrowband Interference Suppression in Wireless OFDM Systems

Signal distortions in communication systems occur between the transmitter and the receiver; these distortions normally cause bit errors at the receiver. In addition interference by other signals may add to the deterioration in performance of the communication link. In order to achieve reliable communication, the effects of the communication channel distortion and interfering signals must be reduced using different techniques. The aim of this paper is to introduce the fundamentals of Orthogonal Frequency Division Multiplexing (OFDM) and Orthogonal Frequency Division Multiple Access (OFDMA), to review and examine the effects of interference in a digital data communication link and to explore methods for mitigating or compensating for these effects

Channel Estimation And Multiuser Detection In Asynchronous Satellite Communications

In this paper, we propose a new method of channel estimation for asynchronous additive white Gaussian noise channels in satellite communications. This method is based on signals correlation and multiuser interference cancellation which adopts a successive structure. Propagation delays and signals amplitudes are jointly estimated in order to be used for data detection at the receiver. As, a multiuser detector, a single stage successive interference cancellation (SIC) architecture is analyzed and integrated to the channel estimation technique and the whole system is evaluated. The satellite access method adopted is the direct sequence code division multiple access (DS CDMA) one. To evaluate the channel estimation and the detection technique, we have simulated a satellite uplink with an asynchronous multiuser access.Comment: 14 pages, 9 figure