Energy harvesting over Rician fading channel: A performance analysis for half-duplex bidirectional sensor networks under hardware impairments

In this paper, a rigorous analysis of the performance of time-switching energy harvesting strategy that is applied for a half-duplex bidirectional wireless sensor network with intermediate relay over a Rician fading channel is presented to provide the exact-form expressions of the outage probability, achievable throughput and the symbol-error-rate (SER) of the system under the hardware impairment condition. Using the proposed probabilistic models for wireless channels between mobile nodes as well as for the hardware noises, we derive the outage probability of the system, and then the throughput and SER can be obtained as a result. Both exact analysis and asymptotic analysis at high signal-power-to-noise-ratio regime are provided. Monte Carlo simulation is also conducted to verify the analysis. This work confirms the effectiveness of energy harvesting applied in wireless sensor networks over a Rician fading channel, and can provide an insightful understanding about the effect of various parameters on the system performance.Web of Science186art. no. 1781

Half-duplex energy harvesting relay network over different fading environment: System performance with effect of hardware impairment

In this paper, we introduce a half-duplex (HD) energy harvesting (EH) relay network over the different fading environment with the effect of hardware impairment (HI). The model system was investigated with the amplify-and-forward (AF) and the power splitting (PS) protocols. The system performance analysis in term of the outage probability (OP), achievable throughput (AT), and bit error rate (BER) were demonstrated with the closed-form expressions. In addition, the power splitting (PS) factor was investigated. We verified the analytical analysis by Monte Carlo simulation with all primary parameters. From the results, we can state that the analytical and simulation results match well with each other.Web of Science911art. no. Unsp 228

Energy harvesting based two-way full-duplex relaying network over a Rician fading environment: performance analysis

Full-duplex transmission is a promising technique to enhance the capacity of communication systems. In this paper, we propose and investigate the system performance of an energy harvesting based two-way full-duplex relaying network over a Rician fading environment. Firstly, we analyse and demonstrate the analytical expressions of the achievable throughput, outage probability, optimal time switching factor, and symbol error ratio of the proposed system. In the second step, the effect of various parameters of the system on its performance is presented and investigated. In the final step, the analytical results are also demonstrated by Monte Carlo simulation. The numerical results proved that the analytical results and the simulation results agreed with each other.Web of Science68112311

Multi-source in DF cooperative networks with the PSR protocol based full-duplex energy harvesting over a Rayleigh fading channel: performance analysis

Due to the tremendous energy consumption growth with ever-increasing connected devices, alternative wireless information and power transfer techniques are important not only for theoretical research but also for saving operational costs and for a sustainable growth of wireless communications. In this paper, we investigate the multi-source in decode-and-forward cooperative networks with the power splitting protocol based full-duplex energy harvesting relaying network over a Rayleigh fading channel. In this system model, the multi-source and the destination communicate with each other by both the direct link and an intermediate helping relay. First, we investigate source selection for the best system performance. Then, the closed-form expression of the outage probability and the symbol error ratio are derived. Finally, the Monte Carlo simulation is used for validating the analytical expressions in connection with all main possible system parameters. The research results show that the analytical and simulation results matched well with each other.Web of Science68327526

Throughput Maximization for UAV-Aided Backscatter Communication Networks

This paper investigates unmanned aerial vehicle (UAV)-aided backscatter communication (BackCom) networks, where the UAV is leveraged to help the backscatter device (BD) forward signals to the receiver. Based on the presence or absence of a direct link between BD and receiver, two protocols, namely transmit-backscatter (TB) protocol and transmit-backscatter-relay (TBR) protocol, are proposed to utilize the UAV to assist the BD. In particular, we formulate the system throughput maximization problems for the two protocols by jointly optimizing the time allocation, reflection coefficient and UAV trajectory. Different static/dynamic circuit power consumption models for the two protocols are analyzed. The resulting optimization problems are shown to be non-convex, which are challenging to solve. We first consider the dynamic circuit power consumption model, and decompose the original problems into three sub-problems, namely time allocation optimization with fixed UAV trajectory and reflection coefficient, reflection coefficient optimization with fixed UAV trajectory and time allocation, and UAV trajectory optimization with fixed reflection coefficient and time allocation. Then, an efficient iterative algorithm is proposed for both protocols by leveraging the block coordinate descent method and successive convex approximation (SCA) techniques. In addition, for the static circuit power consumption model, we obtain the optimal time allocation with a given reflection coefficient and UAV trajectory and the optimal reflection coefficient with low computational complexity by using the Lagrangian dual method. Simulation results show that the proposed protocols are able to achieve significant throughput gains over the compared benchmarks

Multisource power splitting energy harvesting relaying network in half-duplex system over block Rayleigh fading channel: System performance analysis

Energy harvesting and information transferring simultaneously by radio frequency (RF) is considered as the novel solution for green-energy wireless communications. From that point of view, the system performance (SP) analysis of multisource power splitting (PS) energy harvesting (EH) relaying network (RN) over block Rayleigh-fading channels is presented and investigated. We investigate the system in both delay-tolerant transmission (DTT), and delay-limited transmission (DLT) modes and devices work in the half-duplex (HD) system. In this model system, the closed-form (CF) expressions for the outage probability (OP), system throughput (ST) in DLT mode and for ergodic capacity (EC) for DTT mode are analyzed and derived, respectively. Furthermore, CF expression for the symbol errors ratio (SER) is demonstrated. Then, the optimal PS factor is investigated. Finally, a Monte Carlo simulation is used for validating the analytical expressions concerning with all system parameters (SP).Web of Science81art. no. 6

System Performance Analysis of Half-Duplex Relay Network over Rician Fading Channel

In this paper, the system performance of an amplify-and-forward (AF) relaying network over Rician Fading Channel is proposed, analyzed and demonstrated. For details this analysis, the energy and information are transferred from the source to the relay nodes by two methods: 1) time switching protocol and 2) power splitting protocol. Firstly, due to the constraint of the wireless energy harvesting at the relay node, the analytical mathematical expressions of the achievable throughput and the outage probability of both schemes were proposed and demonstrated. After that, the effect of various system parameters on the system performance is rigorously studied with closed-form expressions for the system performance. Finally, the analytical results are also demonstrated by Monte-Carlo simulation in comparison with the closed-form expressions. The numerical results demonstrated the effect of various system parameters, such as energy harvesting time, power splitting ratio, source transmission to noise power, and the threshold value, on the system performance of AF wireless relay nodes. The results show that the analytical mathematical and simulated results match for all possible parameter values for both schemes