Advanced Electrical Machines and Machine-Based Systems for Electric and Hybrid Vehicles

The paper presents a number of advanced solutions on electric machines and machine-based systems for the powertrain of electric vehicles (EVs). Two types of systems are considered, namely the drive systems designated to the EV propulsion and the power split devices utilized in the popular series-parallel hybrid electric vehicle architecture. After reviewing the main requirements for the electric drive systems, the paper illustrates advanced electric machine topologies, including a stator permanent magnet (stator-PM) motor, a hybrid-excitation motor, a flux memory motor and a redundant motor structure. Then, it illustrates advanced electric drive systems, such as the magnetic-geared in-wheel drive and the integrated starter generator (ISG). Finally, three machine-based implementations of the power split devices are expounded, built up around the dual-rotor PM machine, the dual-stator PM brushless machine and the magnetic-geared dual-rotor machine. As a conclusion, the development trends in the field of electric machines and machine-based systems for EVs are summarized

Optimization of Starter Motor for Automobile Applications

Normally, both brushed dc Motor and brushless dc motor are used as a starter motor in the automobile application. This paper presents the optimization methodology for brushed PM dc motors. In this brushed dc motor will be a four pole twenty-five slots based machine. This model analysis involves the more number of analytical calculations and computation for the selection of the best model, performance and excellent material characteristics. This method is considered with the existing commercial dc motors to meet the same performance after reduction of weight with change of some parameters; for cranes to lift the loads, various trucks, drill hand tool and automotive application likes car, bike. Optimised DC machine designs using Ferrite permanent magnets are proposed and provide important size and weight reductions without losing of its performance. The finalized model and the  existing model was solved using the MAGNET Software by FEA (Finite Element Analysis) to see the basic performance such as flux density, speed, torque, output power of the existing model

Dual-Pulse Mode Control of a High-Speed Doubly Salient Electromagnetic Machine for Loss Reduction and Speed Range Extension

In this paper, a dual-pulse mode control of a high-speed doubly salient electromagnetic machine (DSEM) for efficiency improvement over a wide speed range is investigated and implemented. The dual-pulse mode control method and operation principle are introduced. The influence of excitation angles and field current on the operation performance is analyzed by finite element method (FEM) based on the back-electromotive force (EMF) and inductance characteristics. The loss distribution for various speed and load torque requirement is attained, and the control parameters are optimized. The excitation angle can reduce the back-EMF at high speed through transformer-EMF and flux-weakening armature reaction. A prototype of 12/8-pole DSEM drive system is developed and dual-pulse mode control in high-speed operation under low DC-link voltage is implemented. Both the simulated and measured results show that the torque capacity of the DSEM is improved and the loss is reduced over a wide speed range

Design of High Efficiency Brushless Permanent Magnet Machines and Driver System

The dissertation is concerned with the design of high-efficiency permanent magnet synchronous machinery and the control system. The dissertation first talks about the basic concept of the permanent magnet synchronous motor (PMSM) design and the mathematics design model of the advanced design method. The advantage of the design method is that it can increase the high load capacity at no cost of increasing the total machine size. After that, the control method of the PMSM and Permanent magnet synchronous generator (PMSG) is introduced. The design, simulation, and test of a permanent magnet brushless DC (BLDC) motor for electric impact wrench and new mechanical structure are first presented based on the design method. Finite element analysis based on the Maxwell 2D is built to optimize the design and the control board is designed using Altium Designer. Both the motor and control board have been fabricated and tested to verify the design. The electrical and mechanical design are combined, and it provides an analytical IPMBLDC design method and an innovative and reasonable mechanical dynamical calculation method for the impact wrench system, which can be used in whole system design of other functional electric tools. A 2kw high-efficiency alternator system and its control board system are also designed, analyzed and fabricated applying to the truck auxiliary power unit (APU). The alternator system has two stages. The first stage is that the alternator three-phase outputs are connected to the three-phase active rectifier to get 48V DC. An advanced Sliding Mode Observer (SMO) is used to get an alternator position. The buck is used for the second stage to get 14V DC output. The whole system efficiency is much higher than the traditional system using induction motor

SRM drives for electric traction

"GAECE" -- PortadaDescripció del recurs: 11 maig 2020GAECE (Grup d’accionaments elèctrics amb commutació electrònica). The group of electronically commutated electrical drives is a research team of Universitat Politècnica de Catalunya (UPC BARCELONATECH), which conducts investigation in four areas: electrical drives, power electronics, mechanics and energy and sustainability. Regarding electrical drives, research focuses on the development of new reluctance, permanent magnet and hybrid electrical drives. The main goal of those electrical drives is the integration of the power converter/controller and the mechanical transmission, being specially intended for the traction of light electric vehicles. That research is carried out by using the analysis of finite elements, taking into account eco-design criteria, considering new materials and new control strategies.First editio

Investigation of novel multi-layer spoke-type ferrite interior permanent magnet machines

The permanent magnet synchronous machines have been attracting more and more attention due to the advantages of high torque density, outstanding efficiency and maturing technologies. Under the urges of mandatory energy efficiency requirements, they are considered as the most potential candidates to replace the comparatively low-efficient induction machines which dominate the industrial market. However, most of the high performance permanent magnet machines are based on high cost rare-earth materials. Thus, there will be huge demands for low-cost high-performance permanent magnet machines. Ferrite magnet is inexpensive and abundant in supply, and is considered as the most promising alternative to achieve the goal of low cost and high performance. In consideration of the low magnetic energy, this thesis explored the recent developments and possible ideas of ferrite machines, and proposed a novel multi-layer spoke-type interior permanent magnet configuration combining the advantages of flux focusing technique and multi-layer structure. With comparable material cost to induction machines, the proposed ferrite magnet design could deliver 27% higher power with 2-4% higher efficiency with exactly the same frame size. Based on the data base of International Energy Agency (IEA), electricity consumed by electric machines reached 7.1PWh in 2006 [1]. Considering that induction machines take up 90% of the overall industrial installation, the potential energy savings is enormous. This thesis contributes in five key aspects towards the investigation and design of low-cost high-performance ferrite permanent magnet machines. Firstly, accurate analytical models for the multi-layer configurations were developed with the consideration of spatial harmonics, and provided effective yet simple way for preliminary design. Secondly, the influence of key design parameters on performance of the multi-layer ferrite machines were comprehensively investigated, and optimal design could be carried out based on the insightful knowledge revealed. Thirdly, systematic investigation of the demagnetization mechanism was carried out, focusing on the three key factors: armature MMF, intrinsic coercivity and working temperature. Anti-demagnetization designs were presented accordingly to reduce the risk of performance degradation and guarantee the safe operation under various loading conditions. Then, comparative study was carried out with a commercial induction machine for verification of the superior performance of the proposed ferrite machine. Without loss of generality, the two machines had identical stator cores, same rotor diameter and stacking length. Under the operating condition of same stator copper loss, the results confirmed the superior performance of the ferrite machine in terms of torque density, power factor and efficiency. Lastly, mechanical design was discussed to reduce the cost of mass production, and the experimental effort on the prototype machine validates the advantageous performance as well as the analytical and FEA predictions