Advanced Timing and Synchronization Methodologies for Digital VLSI Integrated Circuits

This dissertation addresses timing and synchronization methodologies that are critical to the design, analysis and optimization of high-performance, integrated digital VLSI systems. As process sizes shrink and design complexities increase, achieving timing closure for digital VLSI circuits becomes a significant bottleneck in the integrated circuit design flow. Circuit designers are motivated to investigate and employ alternative methods to satisfy the timing and physical design performance targets. Such novel methods for the timing and synchronization of complex circuitry are developed in this dissertation and analyzed for performance and applicability.Mainstream integrated circuit design flow is normally tuned for zero clock skew, edge-triggered circuit design. Non-zero clock skew or multi-phase clock synchronization is seldom used because the lack of design automation tools increases the length and cost of the design cycle. For similar reasons, level-sensitive registers have not become an industry standard despite their superior size, speed and power consumption characteristics compared to conventional edge-triggered flip-flops.In this dissertation, novel design and analysis techniques that fully automate the design and analysis of non-zero clock skew circuits are presented. Clock skew scheduling of both edge-triggered and level-sensitive circuits are investigated in order to exploit maximum circuit performances. The effects of multi-phase clocking on non-zero clock skew, level-sensitive circuits are investigated leading to advanced synchronization methodologies. Improvements in the scalability of the computational timing analysis process with clock skew scheduling are explored through partitioning and parallelization.The integration of the proposed design and analysis methods to the physical design flow of integrated circuits synchronized with a next-generation clocking technology-resonant rotary clocking technology-is also presented. Based on the design and analysis methods presented in this dissertation, a computer-aided design tool for the design of rotary clock synchronized integrated circuits is developed

Lagrangian relaxation-based multi-threaded discrete gate sizer

In integrated circuit design gate sizing is one of the key optimization techniques which is repeatedly invoked to trade-off delays for area and/or power of the gates during logic design and physical design stages. With increasing design sizes of a million gates and larger, discrete gate sizes and non-convex delay models the gate sizing algorithms that were designed for continuous sizes and convex delay models are slow and timing inaccurate. Of the several published discrete gate sizing algorithms, recent works have shown that Lagrangian relaxation based gate sizers have produced designs with the lowest power on average with high timing accuracy. But they are also very slow due to a large number of expensive timing updates spread across hundreds of iterations of solving the Lagrangian sub-problem. In this thesis we present a Lagrangian relaxation based multi-threaded discrete gate sizer for fast timing and power reduction by swapping the gate sizes and the threshold voltages. We developed two parallelization enabling techniques to reduce the runtime of Lagrangian sub-problem solver, namely, mutual exclusion edge (MEE) assignment and directed acyclic graph (DAG) based netlist traversal. MEEs are dummy edges assigned to reduce computational dependencies among gates sharing one or more common fan-ins. DAG based netlist traversal facilitates simultaneous resizing of gates belonging to different topological levels. We designed a Lagrange multiplier update framework that enables rapid convergence of the timing recovery and power recovery algorithms. To reduce the runtime of timing updates, we proposed a simple and fast-to-compute effective capacitance model and several mechanisms to calibrate the timing models to improve their accuracy. Compared to the state-of-the-art gate sizer, our proposed gate sizer is on average 15x faster and the optimized designs have only 1.7\% higher power. In digital synchronous designs simultaneous gate sizing and clock skew scheduling provides significantly more power saving. We extend the gate sizer to simultaneously schedule the clock skew. It can achieve an average of 18.8\% more reduction in power with only 20\% increase in the runtime

Dynamic voltage scaling algorithms for soft and hard real-time system

Dynamic Voltage Scaling (DVS) has not been investigated completely for further minimizing the energy consumption of microprocessor and prolonging the operational life of real-time systems. In this dissertation, the workload prediction based DVS and the offline convex optimization based DVS for soft and hard real-time systems are investigated, respectively. The proposed algorithms of soft and hard real-time systems are implemented on a small scaled wireless sensor network (WSN) and a simulation model, respectively

Energy Awareness and Scheduling in Mobile Devices and High End Computing

In the context of the big picture as energy demands rise due to growing economies and growing populations, there will be greater emphasis on sustainable supply, conservation, and efficient usage of this vital resource. Even at a smaller level, the need for minimizing energy consumption continues to be compelling in embedded, mobile, and server systems such as handheld devices, robots, spaceships, laptops, cluster servers, sensors, etc. This is due to the direct impact of constrained energy sources such as battery size and weight, as well as cooling expenses in cluster-based systems to reduce heat dissipation. Energy management therefore plays a paramount role in not only hardware design but also in user-application, middleware and operating system design. At a higher level Datacenters are sprouting everywhere due to the exponential growth of Big Data in every aspect of human life, the buzz word these days is Cloud computing. This dissertation, focuses on techniques, specifically algorithmic ones to scale down energy needs whenever the system performance can be relaxed. We examine the significance and relevance of this research and develop a methodology to study this phenomenon. Specifically, the research will study energy-aware resource reservations algorithms to satisfy both performance needs and energy constraints. Many energy management schemes focus on a single resource that is dedicated to real-time or nonreal-time processing. Unfortunately, in many practical systems the combination of hard and soft real-time periodic tasks, a-periodic real-time tasks, interactive tasks and batch tasks must be supported. Each task may also require access to multiple resources. Therefore, this research will tackle the NP-hard problem of providing timely and simultaneous access to multiple resources by the use of practical abstractions and near optimal heuristics aided by cooperative scheduling. We provide an elegant EAS model which works across the spectrum which uses a run-profile based approach to scheduling. We apply this model to significant applications such as BLAT and Assembly of gene sequences in the Bioinformatics domain. We also provide a simulation for extending this model to cloud computing to answers “what if” scenario questions for consumers and operators of cloud resources to help answers questions of deadlines, single v/s distributed cluster use and impact analysis of energy-index and availability against revenue and ROI

Chapter One – An Overview of Architecture-Level Power- and Energy-Efficient Design Techniques

Power dissipation and energy consumption became the primary design constraint for almost all computer systems in the last 15 years. Both computer architects and circuit designers intent to reduce power and energy (without a performance degradation) at all design levels, as it is currently the main obstacle to continue with further scaling according to Moore's law. The aim of this survey is to provide a comprehensive overview of power- and energy-efficient “state-of-the-art” techniques. We classify techniques by component where they apply to, which is the most natural way from a designer point of view. We further divide the techniques by the component of power/energy they optimize (static or dynamic), covering in that way complete low-power design flow at the architectural level. At the end, we conclude that only a holistic approach that assumes optimizations at all design levels can lead to significant savings.Peer ReviewedPostprint (published version

Energy-Efficient Digital Circuit Design using Threshold Logic Gates

abstract: Improving energy efficiency has always been the prime objective of the custom and automated digital circuit design techniques. As a result, a multitude of methods to reduce power without sacrificing performance have been proposed. However, as the field of design automation has matured over the last few decades, there have been no new automated design techniques, that can provide considerable improvements in circuit power, leakage and area. Although emerging nano-devices are expected to replace the existing MOSFET devices, they are far from being as mature as semiconductor devices and their full potential and promises are many years away from being practical. The research described in this dissertation consists of four main parts. First is a new circuit architecture of a differential threshold logic flipflop called PNAND. The PNAND gate is an edge-triggered multi-input sequential cell whose next state function is a threshold function of its inputs. Second a new approach, called hybridization, that replaces flipflops and parts of their logic cones with PNAND cells is described. The resulting \hybrid circuit, which consists of conventional logic cells and PNANDs, is shown to have significantly less power consumption, smaller area, less standby power and less power variation. Third, a new architecture of a field programmable array, called field programmable threshold logic array (FPTLA), in which the standard lookup table (LUT) is replaced by a PNAND is described. The FPTLA is shown to have as much as 50% lower energy-delay product compared to conventional FPGA using well known FPGA modeling tool called VPR. Fourth, a novel clock skewing technique that makes use of the completion detection feature of the differential mode flipflops is described. This clock skewing method improves the area and power of the ASIC circuits by increasing slack on timing paths. An additional advantage of this method is the elimination of hold time violation on given short paths. Several circuit design methodologies such as retiming and asynchronous circuit design can use the proposed threshold logic gate effectively. Therefore, the use of threshold logic flipflops in conventional design methodologies opens new avenues of research towards more energy-efficient circuits.Dissertation/ThesisDoctoral Dissertation Computer Science 201

High performance IC clock networks with grid and tree topologies

In this dissertation, an essential step in the integrated circuit (IC) physical design flow—the clock network design—is investigated. Clock network design entailsa series of computationally intensive, large-scale design and optimization tasks for the generation and distribution of the clock signal through different topologies. The lack or inefficacy of the automation for implementing high performance clock networks, especially for low-power, high speed and variation-aware implementations, is the main driver for this research. The synthesis and optimization methods for the two most commonly used clock topologies in IC design—the grid topology and the tree topology—are primarily investigated.The clock mesh network, which uses the grid topology, has very low skew variation at the cost of high power dissipation. Two novel clock mesh network designmethodologies are proposed in this dissertation in order to reduce the power dissipation. These are the first methods known in literature that combine clock meshsynthesis with incremental register placement and clock gating for power saving purposes. The application of the proposed automation methods on the emerging resonant rotary clocking technology, which also has the grid topology, is investigated in this dissertation as well.The clock tree topology has the advantage of lower power dissipation compared to other traditional clock topologies (e.g. clock mesh, clock spine, clock tree with cross links) at the cost of increased performance degradation due to on-chip variations. A novel clock tree buffer polarity assignment flow is proposed in this dissertation in order to reduce these effects of on-chip variations on the clock tree topology. The proposed polarity assignment flow is the first work that introduces post-silicon, dynamic reconfigurability for polarity assignment, enabling clock gating for low power operation of the variation-tolerant clock tree networks.Ph.D., Electrical Engineering -- Drexel University, 201