Methodologies for the analysis of value from delay-tolerant inter-satellite networking

In a world that is becoming increasingly connected, both in the sense of people and devices, it is of no surprise that users of the data enabled by satellites are exploring the potential brought about from a more connected Earth orbit environment. Lower data latency, higher revisit rates and higher volumes of information are the order of the day, and inter-connectivity is one of the ways in which this could be achieved. Within this dissertation, three main topics are investigated and built upon. First, the process of routing data through intermittently connected delay-tolerant networks is examined and a new routing protocol introduced, called Spae. The consideration of downstream resource limitations forms the heart of this novel approach which is shown to provide improvements in data routing that closely match that of a theoretically optimal scheme. Next, the value of inter-satellite networking is derived in such a way that removes the difficult task of costing the enabling inter-satellite link technology. Instead, value is defined as the price one should be willing to pay for the technology while retaining a mission value greater than its non-networking counterpart. This is achieved through the use of multi-attribute utility theory, trade-space analysis and system modelling, and demonstrated in two case studies. Finally, the effects of uncertainty in the form of sub-system failure are considered. Inter-satellite networking is shown to increase a system's resilience to failure through introduction of additional, partially failed states, made possible by data relay. The lifetime value of a system is then captured using a semi-analytical approach exploiting Markov chains, validated with a numerical Monte Carlo simulation approach. It is evident that while inter-satellite networking may offer more value in general, it does not necessarily result in a decrease in the loss of utility over the lifetime.In a world that is becoming increasingly connected, both in the sense of people and devices, it is of no surprise that users of the data enabled by satellites are exploring the potential brought about from a more connected Earth orbit environment. Lower data latency, higher revisit rates and higher volumes of information are the order of the day, and inter-connectivity is one of the ways in which this could be achieved. Within this dissertation, three main topics are investigated and built upon. First, the process of routing data through intermittently connected delay-tolerant networks is examined and a new routing protocol introduced, called Spae. The consideration of downstream resource limitations forms the heart of this novel approach which is shown to provide improvements in data routing that closely match that of a theoretically optimal scheme. Next, the value of inter-satellite networking is derived in such a way that removes the difficult task of costing the enabling inter-satellite link technology. Instead, value is defined as the price one should be willing to pay for the technology while retaining a mission value greater than its non-networking counterpart. This is achieved through the use of multi-attribute utility theory, trade-space analysis and system modelling, and demonstrated in two case studies. Finally, the effects of uncertainty in the form of sub-system failure are considered. Inter-satellite networking is shown to increase a system's resilience to failure through introduction of additional, partially failed states, made possible by data relay. The lifetime value of a system is then captured using a semi-analytical approach exploiting Markov chains, validated with a numerical Monte Carlo simulation approach. It is evident that while inter-satellite networking may offer more value in general, it does not necessarily result in a decrease in the loss of utility over the lifetime

Survey of Inter-satellite Communication for Small Satellite Systems: Physical Layer to Network Layer View

Small satellite systems enable whole new class of missions for navigation, communications, remote sensing and scientific research for both civilian and military purposes. As individual spacecraft are limited by the size, mass and power constraints, mass-produced small satellites in large constellations or clusters could be useful in many science missions such as gravity mapping, tracking of forest fires, finding water resources, etc. Constellation of satellites provide improved spatial and temporal resolution of the target. Small satellite constellations contribute innovative applications by replacing a single asset with several very capable spacecraft which opens the door to new applications. With increasing levels of autonomy, there will be a need for remote communication networks to enable communication between spacecraft. These space based networks will need to configure and maintain dynamic routes, manage intermediate nodes, and reconfigure themselves to achieve mission objectives. Hence, inter-satellite communication is a key aspect when satellites fly in formation. In this paper, we present the various researches being conducted in the small satellite community for implementing inter-satellite communications based on the Open System Interconnection (OSI) model. This paper also reviews the various design parameters applicable to the first three layers of the OSI model, i.e., physical, data link and network layer. Based on the survey, we also present a comprehensive list of design parameters useful for achieving inter-satellite communications for multiple small satellite missions. Specific topics include proposed solutions for some of the challenges faced by small satellite systems, enabling operations using a network of small satellites, and some examples of small satellite missions involving formation flying aspects.Comment: 51 pages, 21 Figures, 11 Tables, accepted in IEEE Communications Surveys and Tutorial

Hybrid Routing in Delay Tolerant Networks

This work addresses the integration of today\u27s infrastructure-based networks with infrastructure-less networks. The resulting Hybrid Routing System allows for communication over both network types and can help to overcome cost, communication, and overload problems. Mobility aspect resulting from infrastructure-less networks are analyzed and analytical models developed. For development and deployment of the Hybrid Routing System an overlay-based framework is presented

Hybrid routing in delay tolerant networks

This work addresses the integration of today\\u27s infrastructure-based networks with infrastructure-less networks. The resulting Hybrid Routing System allows for communication over both network types and can help to overcome cost, communication, and overload problems. Mobility aspect resulting from infrastructure-less networks are analyzed and analytical models developed. For development and deployment of the Hybrid Routing System an overlay-based framework is presented

A DIVERSE BAND-AWARE DYNAMIC SPECTRUM ACCESS ARCHITECTURE FOR CONNECTIVITY IN RURAL COMMUNITIES

Ubiquitous connectivity plays an important role in improving the quality of life in terms of economic development, health and well being, social justice and equity, as well as in providing new educational opportunities. However, rural communities which account for 46% of the world\u27s population lacks access to proper connectivity to avail such societal benefits, creating a huge digital divide between the urban and rural areas. A primary reason is that the Information and Communication Technologies (ICT) providers have less incentives to invest in rural areas due to lack of promising revenue returns. Existing research and industrial attempts in providing connectivity to rural communities suffer from severe drawbacks, such as expensive wireless spectrum licenses and infrastructures, under- and over-provisioning of spectrum resources while handling heterogeneous traffic, lack of novel wireless technologies tailored to the unique challenges and requirements of rural communities (e.g., agricultural fields). Leveraging the recent advances in Dynamic Spectrum Access (DSA) technologies like wide band spectrum analyzers and spectrum access systems, and multi-radio access technologies (multi-RAT), this dissertation proposes a novel Diverse Band-aware DSA (d-DSA) network architecture, that addresses the drawbacks of existing standard and DSA wireless solutions, and extends ubiquitous connectivity to rural communities; a step forward in the direction of the societal and economic improvements in rural communities, and hence, narrowing the digital divide between the rural and urban societies. According to this paradigm, a certain wireless device is equipped with software defined radios (SDRs) that are capable of accessing multiple (un)licensed spectrum bands, such as, TV, LTE, GSM, CBRS, ISM, and possibly futuristic mmWaves. In order to fully exploit the potential of the d-DSA paradigm, while meeting heterogeneous traffic demands that may be generated in rural communities, we design efficient routing strategies and optimization techniques, which are based on a variety of tools such as graph modeling, integer linear programming, dynamic programming, and heuristic design. Our results on realistic traces in a large variety of rural scenarios show that the proposed techniques are able to meet the heterogeneous traffic requirements of rural applications, while ensuring energy efficiency and robustness of the architecture for providing connectivity to rural communities

Application of Machine Learning Techniques to Delay Tolerant Network Routing

This dissertation discusses several machine learning techniques to improve routing in delay tolerant networks (DTNs). These are networks in which there may be long one-way trip times, asymmetric links, high error rates, and deterministic as well as non-deterministic loss of contact between network nodes, such as interplanetary satellite networks, mobile ad hoc networks and wireless sensor networks. This work uses historical network statistics to train a multi-label classifier to predict reliable paths through the network. In addition, a clustering technique is used to predict future mobile node locations. Both of these techniques are used to reduce the consumption of resources such as network bandwidth, memory and data storage that is required by replication routing methods often used in opportunistic DTN environments. Thesis contributions include: an emulation tool chain developed to create a DTN test bed for machine learning, the network and software architecture for a machine learning based routing method, the development and implementation of classification and clustering techniques and performance evaluation in terms of machine learning and routing metrics

Towards efficacy and efficiency in sparse delay tolerant networks

The ubiquitous adoption of portable smart devices has enabled a new way of communication via Delay Tolerant Networks (DTNs), whereby messages are routed by the personal devices carried by ever-moving people. Although a DTN is a type of Mobile Ad Hoc Network (MANET), traditional MANET solutions are ill-equipped to accommodate message delivery in DTNs due to the dynamic and unpredictable nature of people\u27s movements and their spatio-temporal sparsity. More so, such DTNs are susceptible to catastrophic congestion and are inherently chaotic and arduous. This manuscript proposes approaches to handle message delivery in notably sparse DTNs. First, the ChitChat system [69] employs the social interests of individuals participating in a DTN to accurately model multi-hop relationships and to make opportunistic routing decisions for interest-annotated messages. Second, the ChitChat system is hybridized [70] to consider both social context and geographic information for learning the social semantics of locations so as to identify worthwhile routing opportunities to destinations and areas of interest. Network density analyses of five real-world datasets is conducted to identify sparse datasets on which to conduct simulations, finding that commonly-used datasets in past DTN research are notably dense and well connected, and suggests two rarely used datasets are appropriate for research into sparse DTNs. Finally, the Catora system is proposed to address congestive-driven degradation of service in DTNs by accomplishing two simultaneous tasks: (i) expedite the delivery of higher quality messages by uniquely ordering messages for transfer and delivery, and (ii) avoid congestion through strategic buffer management and message removal. Through dataset-driven simulations, these systems are found to outperform the state-of-the-art, with ChitChat facilitating delivery in sparse DTNs and Catora unencumbered by congestive conditions --Abstract, page iv

Marshall Space Flight Center Research and Technology Report 2019

Today, our calling to explore is greater than ever before, and here at Marshall Space Flight Centerwe make human deep space exploration possible. A key goal for Artemis is demonstrating and perfecting capabilities on the Moon for technologies needed for humans to get to Mars. This years report features 10 of the Agencys 16 Technology Areas, and I am proud of Marshalls role in creating solutions for so many of these daunting technical challenges. Many of these projects will lead to sustainable in-space architecture for human space exploration that will allow us to travel to the Moon, on to Mars, and beyond. Others are developing new scientific instruments capable of providing an unprecedented glimpse into our universe. NASA has led the charge in space exploration for more than six decades, and through the Artemis program we will help build on our work in low Earth orbit and pave the way to the Moon and Mars. At Marshall, we leverage the skills and interest of the international community to conduct scientific research, develop and demonstrate technology, and train international crews to operate further from Earth for longer periods of time than ever before first at the lunar surface, then on to our next giant leap, human exploration of Mars. While each project in this report seeks to advance new technology and challenge conventions, it is important to recognize the diversity of activities and people supporting our mission. This report not only showcases the Centers capabilities and our partnerships, it also highlights the progress our people have achieved in the past year. These scientists, researchers and innovators are why Marshall and NASA will continue to be a leader in innovation, exploration, and discovery for years to come

Simulating Opportunistic Networks: Survey and Future Directions

(c) 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works[EN] Simulation is one of the most powerful tools we have for evaluating the performance of opportunistic networks (OppNets). In this paper, we focus on available tools and mod- els, compare their performance and precision and experimentally show the scalability of different simulators. We also perform a gap analysis of state-of-the-art OppNet simulations and sketch out possible further development and lines of research. This paper is targeted at students starting work and research in this area while also serving as a valuable source of information for experienced researchers.This work was supported in part by the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, in part by the Universidad Laica Eloy Alfaro de Manabi, and in part by the Secretaria Nacional de Educacion Superior, Ciencia, Tecnologia e Innovacion, Ecuador. (Corresponding author: Jens Dede.)Dede, J.; Förster, A.; Hernández-Orallo, E.; Herrera-Tapia, J.; Kuladinithi, K.; Kuppusamy, V.; Manzoni, P.... (2018). Simulating Opportunistic Networks: Survey and Future Directions. IEEE Communications Surveys & Tutorials. 20(2):1547-1573. https://doi.org/10.1109/COMST.2017.2782182S1547157320

Routing protocol optimization in challenged multihop wireless networks

Durant ces dernières années, de nombreux travaux de recherches ont été menés dans le domaine des réseaux multi-sauts sans fil à contraintes (MWNs: Multihop Wireless Networks). Grâce à l'évolution de la technologie des systèmes mico-electro-méchaniques (MEMS) et, depuis peu, les nanotechnologies, les MWNs sont une solution de choix pour une variété de problèmes. Le principal avantage de ces réseaux est leur faible coût de production qui permet de développer des applications ayant un unique cycle de vie. Cependant, si le coût de fabrication des nœuds constituant ce type de réseaux est assez faible, ces nœuds sont aussi limités en capacité en termes de: rayon de transmission radio, bande passante, puissance de calcul, mémoire, énergie, etc. Ainsi, les applications qui visent l'utilisation des MWNs doivent être conçues avec une grande précaution, et plus spécialement la conception de la fonction de routage, vu que les communications radio constituent la tâche la plus consommatrice d'énergie.Le but de cette thèse est d'analyser les différents défis et contraintes qui régissent la conception d'applications utilisant les MWNs. Ces contraintes se répartissent tout le long de la pile protocolaire. On trouve au niveau application des contraintes comme: la qualité de service, la tolérance aux pannes, le modèle de livraison de données au niveau application, etc. Au niveau réseau, on peut citer les problèmes de la dynamicité de la topologie réseau, la présence de trous, la mobilité, etc. Nos contributions dans cette thèse sont centrées sur l'optimisation de la fonction de routage en considérant les besoins de l'application et les contraintes du réseau. Premièrement, nous avons proposé un protocole de routage multi-chemin "en ligne" pour les applications orientées QoS utilisant des réseaux de capteurs multimédia. Ce protocole repose sur la construction de multiples chemins durant la transmission des paquets vers leur destination, c'est-à-dire sans découverte et construction des routes préalables. En permettant des transmissions parallèles, ce protocole améliore la transmission de bout-en-bout en maximisant la bande passante du chemin agrégé et en minimisant les délais. Ainsi, il permet de répondre aux exigences des applications orientées QoS.Deuxièmement, nous avons traité le problème du routage dans les réseaux mobiles tolérants aux délais. Nous avons commencé par étudier la connectivité intermittente entre les différents et nous avons extrait un modèle pour les contacts dans le but pouvoir prédire les future contacts entre les nœuds. En se basant sur ce modèle, nous avons proposé un protocole de routage, qui met à profit la position géographique des nœuds, leurs trajectoires, et la prédiction des futurs contacts dans le but d'améliorer les décisions de routage. Le protocole proposé permet la réduction des délais de bout-en-bout tout en utilisant d'une manière efficace les ressources limitées des nœuds que ce soit en termes de mémoire (pour le stockage des messages dans les files d'attentes) ou la puissance de calcul (pour l'exécution de l'algorithme de prédiction).Finalement, nous avons proposé un mécanisme de contrôle de la topologie avec un algorithme de routage des paquets pour les applications orientés évènement et qui utilisent des réseaux de capteurs sans fil statiques. Le contrôle de la topologie est réalisé à travers l'utilisation d'un algorithme distribué pour l'ordonnancement du cycle de service (sleep/awake). Les paramètres de l'algorithme proposé peuvent être réglés et ajustés en fonction de la taille du voisinage actif désiré (le nombre moyen de voisin actifs pour chaque nœud). Le mécanisme proposé assure un compromis entre le délai pour la notification d'un événement et la consommation d'énergie globale dans le réseau.Great research efforts have been carried out in the field of challenged multihop wireless networks (MWNs). Thanks to the evolution of the Micro-Electro-Mechanical Systems (MEMS) technology and nanotechnologies, multihop wireless networks have been the solution of choice for a plethora of problems. The main advantage of these networks is their low manufacturing cost that permits one-time application lifecycle. However, if nodes are low-costly to produce, they are also less capable in terms of radio range, bandwidth, processing power, memory, energy, etc. Thus, applications need to be carefully designed and especially the routing task because radio communication is the most energy-consuming functionality and energy is the main issue for challenged multihop wireless networks.The aim of this thesis is to analyse the different challenges that govern the design of challenged multihop wireless networks such as applications challenges in terms of quality of service (QoS), fault-tolerance, data delivery model, etc., but also networking challenges in terms of dynamic network topology, topology voids, etc. Our contributions in this thesis focus on the optimization of routing under different application requirements and network constraints. First, we propose an online multipath routing protocol for QoS-based applications using wireless multimedia sensor networks. The proposed protocol relies on the construction of multiple paths while transmitting data packets to their destination, i.e. without prior topology discovery and path establishment. This protocol achieves parallel transmissions and enhances the end-to-end transmission by maximizing path bandwidth and minimizing the delays, and thus meets the requirements of QoS-based applications. Second, we tackle the problem of routing in mobile delay-tolerant networks by studying the intermittent connectivity of nodes and deriving a contact model in order to forecast future nodes' contacts. Based upon this contact model, we propose a routing protocol that makes use of nodes' locations, nodes' trajectories, and inter-node contact prediction in order to perform forwarding decisions. The proposed routing protocol achieves low end-to-end delays while using efficiently constrained nodes' resources in terms of memory (packet queue occupancy) and processing power (forecasting algorithm). Finally, we present a topology control mechanism along a packet forwarding algorithm for event-driven applications using stationary wireless sensor networks. Topology control is achieved by using a distributed duty-cycle scheduling algorithm. Algorithm parameters can be tuned according to the desired node's awake neighbourhood size. The proposed topology control mechanism ensures trade-off between event-reporting delay and energy consumption.BORDEAUX1-Bib.electronique (335229901) / SudocSudocFranceF