Visible Light Communication Cyber Security Vulnerabilities For Indoor And Outdoor Vehicle-To-Vehicle Communication

Light fidelity (Li-Fi), developed from the approach of Visible Light Communication (VLC), is a great replacement or complement to existing radio frequency-based (RF) networks. Li-Fi is expected to be deployed in various environments were, due to Wi-Fi congestion and health limitations, RF should not be used. Moreover, VLC can provide the future fifth generation (5G) wireless technology with higher data rates for device connectivity which will alleviate the traffic demand. 5G is playing a vital role in encouraging the modern applications. In 2023, the deployment of all the cellular networks will reach more than 5 billion users globally. As a result, the security and privacy of 5G wireless networks is an essential problem as those modern applications are in people\u27s life everywhere. VLC security is as one of the core physical-layer security (PLS) solutions for 5G networks. Due to the fact that light does not penetrate through solid objects or walls, VLC naturally has higher security and privacy for indoor wireless networks compared to RF networks. However, the broadcasting nature of VLC caused concerns, e.g., eavesdropping, have created serious attention as it is a crucial step to validate the success of VLC in wild. The aim of this thesis is to properly address the security issues of VLC and further enhance the VLC nature security. We analyzed the secrecy performance of a VLC model by studying the characteristics of the transmitter, receiver and the visible light channel. Moreover, we mitigated the security threats in the VLC model for the legitimate user, by 1) implementing more access points (APs) in a multiuser VLC network that are cooperated, 2) reducing the semi-angle of LED to help improve the directivity and secrecy and, 3) using the protected zone strategy around the AP where eavesdroppers are restricted. According to the model\u27s parameters, the results showed that the secrecy performance in the proposed indoor VLC model and the vehicle-to-vehicle (V2V) VLC outdoor model using a combination of multiple PLS techniques as beamforming, secure communication zones, and friendly jamming is enhanced. The proposed model security performance was measured with respect to the signal to noise ratio (SNR), received optical power, and bit error rate (BER) Matlab simulation results

Cloud Computing in VANETs: Architecture, Taxonomy, and Challenges

Cloud Computing in VANETs (CC-V) has been investigated into two major themes of research including Vehicular Cloud Computing (VCC) and Vehicle using Cloud (VuC). VCC is the realization of autonomous cloud among vehicles to share their abundant resources. VuC is the efficient usage of conventional cloud by on-road vehicles via a reliable Internet connection. Recently, number of advancements have been made to address the issues and challenges in VCC and VuC. This paper qualitatively reviews CC-V with the emphasis on layered architecture, network component, taxonomy, and future challenges. Specifically, a four-layered architecture for CC-V is proposed including perception, co-ordination, artificial intelligence and smart application layers. Three network component of CC-V namely, vehicle, connection and computation are explored with their cooperative roles. A taxonomy for CC-V is presented considering major themes of research in the area including design of architecture, data dissemination, security, and applications. Related literature on each theme are critically investigated with comparative assessment of recent advances. Finally, some open research challenges are identified as future issues. The challenges are the outcome of the critical and qualitative assessment of literature on CC-V

Protocols and Architecture for Privacy-preserving Authentication and Secure Message Dissemination in Vehicular Ad Hoc Networks

The rapid development in the automotive industry and wireless communication technologies have enhanced the popularity of Vehicular ad hoc networks (VANETs). Today, the automobile industry is developing sophisticated sensors that can provide a wide range of assistive features, including accident avoidance, automatic lane tracking, semi-autonomous driving, suggested lane changes, and more. VANETs can provide drivers a safer and more comfortable driving experience, as well as many other useful services by leveraging such technological advancements. Even though this networking technology enables smart and autonomous driving, it also introduces a plethora of attack vectors. However, the main issues to be sorted out and addressed for the widespread deployment/adoption of VANETs are privacy, authenticating users, and the distribution of secure messages. These issues have been addressed in this dissertation, and the contributions of this dissertation are summarized as follows: Secure and privacy-preserving authentication and message dissemination in VANETs: Attackers can compromise the messages disseminated within VANETs by tampering with the message content or sending malicious messages. Therefore, it is crucial to ensure the legitimacy of the vehicles participating in the VANETs as well as the integrity and authenticity of the messages transmitted in VANETs. In VANET communication, the vehicle uses pseudonyms instead of its real identity to protect its privacy. However, the real identity of a vehicle must be revealed when it is determined to be malicious. This dissertation presents a distributed and scalable privacy-preserving authentication and message dissemination scheme in VANET. Low overhead privacy-preserving authentication scheme in VANETs: The traditional pseudonym-based authentication scheme uses Certificate Revocation Lists (CRLs) to store the certificates of revoked and malicious entities in VANETs. However, the size of CRL increases significantly with the increased number of revoked entities. Therefore, the overhead involved in maintaining the revoked certificates is overwhelming in CRL-based solutions. This dissertation presents a lightweight privacy-preserving authentication scheme that reduces the overhead associated with maintaining CRLs in VANETs. Our scheme also provides an efficient look-up operation for CRLs. Efficient management of pseudonyms for privacy-preserving authentication in VANETs: In VANETs, vehicles change pseudonyms frequently to avoid the traceability of attackers. However, if only one vehicle out of 100 vehicles changes its pseudonym, an intruder can easily breach the privacy of the vehicle by linking the old and new pseudonym. This dissertation presents an efficient method for managing pseudonyms of vehicles. In our scheme, vehicles within the same region simultaneously change their pseudonyms to reduce the chance of linking two pseudonyms to the same vehicle

ieee access special section editorial recent advances on radio access and security methods in 5g networks

Serviceability is the ability of a network to serve user equipments (UEs) within desired requirements (e.g., throughput, delay, and packet loss). High serviceability is considered as one of the key foundational criteria towards a successful fog radio access infrastructure satisfying the Internet of Things paradigm in the 5G era. In the article by Dao et al. , "Adaptive resource balancing for serviceability maximization in fog radio access networks," the authors propose an adaptive resource balancing (ARB) scheme for serviceability maximization in fog radio access networks wherein the resource block (RB) utilization among remote radio heads (RRHs) is balanced using the backpressure algorithm with respect to a time-varying network topology issued by potential RRH motilities. The optimal UE selection for service migration from a high-RB-utilization RRH to its neighboring low RB-utilization RRHs is determined by the Hungarian method to minimize RB occupation after moving the service. Analytical results reveal that the proposed ARB scheme provides substantial gains compared to the standalone capacity-aware, max-rate, and cache-aware UE association approaches in terms of serviceability, availability, and throughput

Achieving reliable and enhanced communication in vehicular ad hoc networks (VANETs)

A thesis submitted to the University of Bedfordshire in partial fulfilment of the requirement for the degree of Doctor of PhilosophyWith the envisioned age of Internet of Things (IoTs), different aspects of Intelligent Transportation System (ITS) will be linked so as to advance road transportation safety, ease congestion of road traffic, lessen air pollution, improve passenger transportation comfort and significantly reduce road accidents. In vehicular networks, regular exchange of current position, direction, speed, etc., enable mobile vehicle to foresee an imminent vehicle accident and notify the driver early enough in order to take appropriate action(s) or the vehicle on its own may take adequate preventive measures to avert the looming accident. Actualizing this concept requires use of shared media access protocol that is capable of guaranteeing reliable and timely broadcast of safety messages. This dissertation investigates the use of Network Coding (NC) techniques to enrich the content of each transmission and ensure improved high reliability of the broadcasted safety messages with less number of retransmissions. A Code Aided Retransmission-based Error Recovery (CARER) protocol is proposed. In order to avoid broadcast storm problem, a rebroadcasting vehicle selection metric η, is developed, which is used to select a vehicle that will rebroadcast the received encoded message. Although the proposed CARER protocol demonstrates an impressive performance, the level of incurred overhead is fairly high due to the use of complex rebroadcasting vehicle selection metric. To resolve this issue, a Random Network Coding (RNC) and vehicle clustering based vehicular communication scheme with low algorithmic complexity, named Reliable and Enhanced Cooperative Cross-layer MAC (RECMAC) scheme, is proposed. The use of this clustering technique enables RECMAC to subdivide the vehicular network into small manageable, coordinated clusters which further improve transmission reliability and minimise negative impact of network overhead. Similarly, a Cluster Head (CH) selection metric ℱ(\u1d457) is designed, which is used to determine and select the most suitably qualified candidate to become the CH of a particular cluster. Finally, in order to investigate the impact of available radio spectral resource, an in-depth study of the required amount of spectrum sufficient to support high transmission reliability and minimum latency requirements of critical road safety messages in vehicular networks was carried out. The performance of the proposed schemes was clearly shown with detailed theoretical analysis and was further validated with simulation experiments

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: vehicular ad-hoc networks, security and caching, TCP in ad-hoc networks and emerging applications. It is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

New Distributed Byzantine Fault Detection & Data Integrity Scheme for WANET

Wireless ad-hoc networks (WANET) with multi-hop communication are subject to a variety of faults and attacks, and detecting the source of any fault is highly important to maintain the quality of service, confidentiality, and reliability of an entire network operation. Intermediate byzantine nodes in WANET could subvert the system by altering sensitive routed information unintentionally due to many reasons such as power depletion, software bug, malware, and environmental obstacles. This thesis highlights some of the research studies done in the area of distributed fault detection (DFD) and proposes a solution to detect Byzantine behavior cooperatively. The present research will focus on designing a scalable distributed fault detection (DFD) algorithm to detect byzantine nodes who permanently try to distort or reroute information while relaying a message from one node to another, complimentary to that, a symmetric distributed cryptography scheme will be employed to continuously validates the data integrity of a routed message. The main hypothesis of the research is that if a wireless ad-hoc network is been divided into N number of groups (classes) with relatively equal number of members, each group of nodes can cooperatively protect the network from every other group. Practically, each group of nodes will be assigned to a distinct shared key; nodes with similar group assignment shall guard the integrity of a routing path by incorporating their own secret message authentication code (MAC) that can be only validated by nodes belonging to the same group contributing to the same routing path. If a node from Group(i) detects a tampering event, it should either store and delay a fault report or embed a fault report to the same routed message and forward it to the Master Node (Destination) if applicable. Further report message overhead optimization has been devised to reduce the energy cost. Moreover, the empirical results have shown that the more reported evidence the master node can collect, the more accuracy of detection can be reached based on an incremental stream of evidence that contains information about both healthy and unhealthy nodes; so that every healthy report type can justify the unhealthy false report. The heuristic simulation based study considered many different aspects of the system for evaluation such as detection accuracy, fault model, the optimal number of classes, energy consumption, the impact of mobility, and network lifetime. The iGraph network simulation tool has been employed for visualization and graph manipulation, whereas, Python programming language has been utilized in conjunction to implement and simulate the DFD algorithm and generate the results