Energy-Efficient Digital Circuit Design using Threshold Logic Gates

abstract: Improving energy efficiency has always been the prime objective of the custom and automated digital circuit design techniques. As a result, a multitude of methods to reduce power without sacrificing performance have been proposed. However, as the field of design automation has matured over the last few decades, there have been no new automated design techniques, that can provide considerable improvements in circuit power, leakage and area. Although emerging nano-devices are expected to replace the existing MOSFET devices, they are far from being as mature as semiconductor devices and their full potential and promises are many years away from being practical. The research described in this dissertation consists of four main parts. First is a new circuit architecture of a differential threshold logic flipflop called PNAND. The PNAND gate is an edge-triggered multi-input sequential cell whose next state function is a threshold function of its inputs. Second a new approach, called hybridization, that replaces flipflops and parts of their logic cones with PNAND cells is described. The resulting \hybrid circuit, which consists of conventional logic cells and PNANDs, is shown to have significantly less power consumption, smaller area, less standby power and less power variation. Third, a new architecture of a field programmable array, called field programmable threshold logic array (FPTLA), in which the standard lookup table (LUT) is replaced by a PNAND is described. The FPTLA is shown to have as much as 50% lower energy-delay product compared to conventional FPGA using well known FPGA modeling tool called VPR. Fourth, a novel clock skewing technique that makes use of the completion detection feature of the differential mode flipflops is described. This clock skewing method improves the area and power of the ASIC circuits by increasing slack on timing paths. An additional advantage of this method is the elimination of hold time violation on given short paths. Several circuit design methodologies such as retiming and asynchronous circuit design can use the proposed threshold logic gate effectively. Therefore, the use of threshold logic flipflops in conventional design methodologies opens new avenues of research towards more energy-efficient circuits.Dissertation/ThesisDoctoral Dissertation Computer Science 201

OPTIMAL AREA AND PERFORMANCE MAPPING OF K-LUT BASED FPGAS

FPGA circuits are increasingly used in many fields: for rapid prototyping of new products (including fast ASIC implementation), for logic emulation, for producing a small number of a device, or if a device should be reconfigurable in use (reconfigurable computing). Determining if an arbitrary, given wide, function can be implemented by a programmable logic block, unfortunately, it is generally, a very difficult problem. This problem is called the Boolean matching problem. This paper introduces a new implemented algorithm able to map, both for area and performance, combinational networks using k-LUT based FPGAs.k-LUT based FPGAs, combinational circuits, performance-driven mapping.

Parallelization of dynamic programming recurrences in computational biology

The rapid growth of biosequence databases over the last decade has led to a performance bottleneck in the applications analyzing them. In particular, over the last five years DNA sequencing capacity of next-generation sequencers has been doubling every six months as costs have plummeted. The data produced by these sequencers is overwhelming traditional compute systems. We believe that in the future compute performance, not sequencing, will become the bottleneck in advancing genome science. In this work, we investigate novel computing platforms to accelerate dynamic programming algorithms, which are popular in bioinformatics workloads. We study algorithm-specific hardware architectures that exploit fine-grained parallelism in dynamic programming kernels using field-programmable gate arrays: FPGAs). We advocate a high-level synthesis approach, using the recurrence equation abstraction to represent dynamic programming and polyhedral analysis to exploit parallelism. We suggest a novel technique within the polyhedral model to optimize for throughput by pipelining independent computations on an array. This design technique improves on the state of the art, which builds latency-optimal arrays. We also suggest a method to dynamically switch between a family of designs using FPGA reconfiguration to achieve a significant performance boost. We have used polyhedral methods to parallelize the Nussinov RNA folding algorithm to build a family of accelerators that can trade resources for parallelism and are between 15-130x faster than a modern dual core CPU implementation. A Zuker RNA folding accelerator we built on a single workstation with four Xilinx Virtex 4 FPGAs outperforms 198 3 GHz Intel Core 2 Duo processors. Furthermore, our design running on a single FPGA is an order of magnitude faster than competing implementations on similar-generation FPGAs and graphics processors. Our work is a step toward the goal of automated synthesis of hardware accelerators for dynamic programming algorithms

Pipelining Saturated Accumulation

Aggressive pipelining and spatial parallelism allow integrated circuits (e.g., custom VLSI, ASICs, and FPGAs) to achieve high throughput on many Digital Signal Processing applications. However, cyclic data dependencies in the computation can limit parallelism and reduce the efficiency and speed of an implementation. Saturated accumulation is an important example where such a cycle limits the throughput of signal processing applications. We show how to reformulate saturated addition as an associative operation so that we can use a parallel-prefix calculation to perform saturated accumulation at any data rate supported by the device. This allows us, for example, to design a 16-bit saturated accumulator which can operate at 280 MHz on a Xilinx Spartan-3(XC3S-5000-4) FPGA, the maximum frequency supported by the component's DCM

Fast algorithms for retiming large digital circuits

The increasing complexity of VLSI systems and shrinking time to market requirements demand good optimization tools capable of handling large circuits. Retiming is a powerful transformation that preserves functionality, and can be used to optimize sequential circuits for a wide range of objective functions by judiciously relocating the memory elements. Leiserson and Saxe, who introduced the concept, presented algorithms for period optimization (minperiod retiming) and area optimization (minarea retiming). The ASTRA algorithm proposed an alternative view of retiming using the equivalence between retiming and clock skew optimization;The first part of this thesis defines the relationship between the Leiserson-Saxe and the ASTRA approaches and utilizes it for efficient minarea retiming of large circuits. The new algorithm, Minaret, uses the same linear program formulation as the Leiserson-Saxe approach. The underlying philosophy of the ASTRA approach is incorporated to reduce the number of variables and constraints in this linear program. This allows minarea retiming of circuits with over 56,000 gates in under fifteen minutes;The movement of flip-flops in control logic changes the state encoding of finite state machines, requiring the preservation of initial (reset) states. In the next part of this work the problem of minimizing the number of flip-flops in control logic subject to a specified clock period and with the guarantee of an equivalent initial state, is formulated as a mixed integer linear program. Bounds on the retiming variables are used to guarantee an equivalent initial state in the retimed circuit. These bounds lead to a simple method for calculating an equivalent initial state for the retimed circuit;The transparent nature of level sensitive latches enables level-clocked circuits to operate faster and require less area. However, this transparency makes the operation of level-clocked circuits very complex, and optimization of level-clocked circuits is a difficult task. This thesis also presents efficient algorithms for retiming large level-clocked circuits. The relationship between retiming and clock skew optimization for level-clocked circuits is defined and utilized to develop efficient retiming algorithms for period and area optimization. Using these algorithms a circuit with 56,000 gates could be retimed for minimum period in under twenty seconds and for minimum area in under 1.5 hours

Generating high-performance arithmetic operators for FPGAs

This article addresses the development of complex, heavily parameterized and flexible operators to be used in FPGA-based floating-point accelerators. Languages such as VHDL or Verilog are not ideally suited for this task. The main problem is the automation of problems such as parameter-directed or target-directed architectural optimization, pipeline optimization, and generation of relevant test benches. This article introduces FloPoCo, an open object-oriented software framework designed to address these issues. Written in C++, it inputs operator specifications, a target FPGA and and an objective frequency, and outputs synthesisable VHDL fine-tuned for this FPGA at this frequency. Its design choices are discussed and validated on various operators

High Level Synthesis for Packet Processing Pipelines

Packet processing is an essential function of state-of-the-art network routers and switches. Implementing packet processors in pipelined architectures is a well-known, established technique, albeit different approaches have been proposed. The design of packet processing pipelines is a delicate trade-off between the desire for abstract specifications, short development time, and design maintainability on one hand and very aggressive performance requirements on the other. This thesis proposes a coherent design flow for packet processing pipelines. Like the design process itself, I start by introducing a novel domain-specific language that provides a high-level specification of the pipeline. Next, I address synthesizing this model and calculating its worst-case throughput. Finally, I address some specific circuit optimization issues. I claim, based on experimental results, that my proposed technique can dramatically improve the design process of these pipelines, while the resulting performance matches the expectations of hand-crafted design. The considered pipelines exhibit a pseudo-linear topology, which can be too restrictive in the general case. However, especially due to its high performance, such an architecture may be suitable for applications outside packet processing, in which case some of my proposed techniques could be easily adapted. Since I ran my experiments on FPGAs, this work has an inherent bias towards that technology; however, most results are technology-independent