Collision Avoidance Based Neighbor Discovery in Ad Hoc Wireless Networks

[EN] Neighbor discovery is an important first step after the deployment of ad hoc wireless networks since they are a type of network that do not provide a communications infrastructure right after their deployment, the devices have radio transceivers which provide a limited transmission range, and there is a lack of knowledge of the potential neighbors. In this work two proposals to overcome the neighbor discovery in static one-hop environments in the presence of collisions, are presented. We performed simulations through Castalia 3.2, to compare the performance of the proposals against that for two protocols from the literature, i.e. PRR and Hello, and evaluate them according to six metrics. According to simulation results, the Leader-based proposal (O(N)) outperforms the other protocols in terms of neighbor discovery time, throughput, discoveries vs packets sent ratio, and packets received vs sent ratio, and the TDMA-based proposal is the slowest (O(N-2)) and presents the worst results regarding energy consumption, and discoveries vs packets sent ratio. However, both proposals follow a predetermined transmission schedule that allows them to discover all the neighbors with probability 1, and use a feedback mechanism. We also performed an analytical study for both proposals according to several metrics. Moreover, the Leader-based solution can only properly operate in one-hop environments, whereas the TDMA-based proposal is appropriate for its use in multi-hop environments.This work has been partially supported by the "Ministerio de Economia y Competitividad" in the "Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia, Subprograma Estatal de Generacion de Conocimiento" within the project under Grant TIN2017-84802-C2-1-P. This work has also been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR.Sorribes, JV.; Peñalver Herrero, ML.; Lloret, J.; Tavares De Araujo Cesariny Calafate, CM. (2022). Collision Avoidance Based Neighbor Discovery in Ad Hoc Wireless Networks. Wireless Personal Communications. 125(2):987-1011. https://doi.org/10.1007/s11277-021-09091-x9871011125

Airborne Directional Networking: Topology Control Protocol Design

This research identifies and evaluates the impact of several architectural design choices in relation to airborne networking in contested environments related to autonomous topology control. Using simulation, we evaluate topology reconfiguration effectiveness using classical performance metrics for different point-to-point communication architectures. Our attention is focused on the design choices which have the greatest impact on reliability, scalability, and performance. In this work, we discuss the impact of several practical considerations of airborne networking in contested environments related to autonomous topology control modeling. Using simulation, we derive multiple classical performance metrics to evaluate topology reconfiguration effectiveness for different point-to-point communication architecture attributes for the purpose of qualifying protocol design elements

Randomized neighbor discovery protocols with collision detection for static multi-hop wireless ad hoc networks

[EN] Neighbor discovery represents a first step after the deployment of wireless ad hoc networks, since the nodes that form them are equipped with limited-range radio transceivers, and they typically do not know their neighbors. In this paper two randomized neighbor discovery approaches, called CDH and CDPRR, based on collision detection for static multi-hop wireless ad hoc networks, are presented. Castalia 3.2 simulator has been used to compare our proposed protocols against two protocols chosen from the literature and used as reference: the PRR, and the Hello protocol. For the experiments, we chose five metrics: the neighbor discovery time, the number of discovered neighbors, the energy consumption, the throughput and the number of discovered neighbors versus packets sent ratio. According to the results obtained through simulation, we can conclude that our randomized proposals outperform both Hello and PRR protocols in the presence of collisions regarding all five metrics, for both one-hop and multi-hop scenarios. As novelty compared to the reference protocols, both proposals allow nodes to discover all their neighbors with probability 1, they are based on collision detection and know when to terminate the neighbor discovery process. Furthermore, qualitative comparisons of the existing protocols and the proposals are available in this paper. Moreover, CDPRR presents better results in terms of time, energy consumption and number of discovered neighbors versus packets sent ratio. We found that both proposals achieve to operate under more realistic assumptions. Furthermore, CDH does not need to know the number of nodes in the network.This work has been partially supported by the "Ministerio de Economia y Competitividad" in the "Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia, Subprograma Estatal de Generacion de Conocimiento" within the project under Grant TIN2017-84802-C2-1-P. This work has also been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR.Sorribes, JV.; Peñalver Herrero, ML.; Tavares De Araujo Cesariny Calafate, CM.; Lloret, J. (2021). Randomized neighbor discovery protocols with collision detection for static multi-hop wireless ad hoc networks. Telecommunication Systems. 77(3):577-596. https://doi.org/10.1007/s11235-021-00763-457759677

Short Range Gigabit Wireless Communications Systems: Potentials, Challenges and Techniques

In this paper, we discuss multi-gigabits per second wireless networks in the 60GHz millimeter wave frequency band. Despite the large unlicensed bandwidth offered by the 60GHz frequency band, severe technical challenges exist towards making multi-Gbps a reality. We discuss the challenges in three different layers: PHY, MAC and the application layers. We also discuss some important technologies in overcoming these challenges, including antenna array beamforming, baseband modulation, data aggregation. The worldwide 60GHz regulatory and the ongoing standardization efforts are reviewed as well

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Real-Time Localization Using Software Defined Radio

Service providers make use of cost-effective wireless solutions to identify, localize, and possibly track users using their carried MDs to support added services, such as geo-advertisement, security, and management. Indoor and outdoor hotspot areas play a significant role for such services. However, GPS does not work in many of these areas. To solve this problem, service providers leverage available indoor radio technologies, such as WiFi, GSM, and LTE, to identify and localize users. We focus our research on passive services provided by third parties, which are responsible for (i) data acquisition and (ii) processing, and network-based services, where (i) and (ii) are done inside the serving network. For better understanding of parameters that affect indoor localization, we investigate several factors that affect indoor signal propagation for both Bluetooth and WiFi technologies. For GSM-based passive services, we developed first a data acquisition module: a GSM receiver that can overhear GSM uplink messages transmitted by MDs while being invisible. A set of optimizations were made for the receiver components to support wideband capturing of the GSM spectrum while operating in real-time. Processing the wide-spectrum of the GSM is possible using a proposed distributed processing approach over an IP network. Then, to overcome the lack of information about tracked devices’ radio settings, we developed two novel localization algorithms that rely on proximity-based solutions to estimate in real environments devices’ locations. Given the challenging indoor environment on radio signals, such as NLOS reception and multipath propagation, we developed an original algorithm to detect and remove contaminated radio signals before being fed to the localization algorithm. To improve the localization algorithm, we extended our work with a hybrid based approach that uses both WiFi and GSM interfaces to localize users. For network-based services, we used a software implementation of a LTE base station to develop our algorithms, which characterize the indoor environment before applying the localization algorithm. Experiments were conducted without any special hardware, any prior knowledge of the indoor layout or any offline calibration of the system

Energy-aware Randomized Neighbor Discovery Protocol based on Collision Detection in Wireless Ad Hoc Networks

[EN] In wireless ad hoc networks, neighbor discovery is necessary as an initial step. In this work we present LECDH (Low Energy Collision Detection Hello), an energy-aware randomized handshake-based neighbor discovery protocol for static environments. We carried out simulations through Castalia 3.2 simulator and compared LECDH with an existing protocol EAH (Energy Aware Hello) used as reference. We conclude that the proposal outperforms the reference protocol both in one-hop and multi-hop environments in terms of Energy consumption, Discovery time, Number of discovered neighbors, Throughput, and Discoveries per packet sent, for high duty cycles. Moreover, for low number of nodes in LECDH, as the duty cycle is reduced the performance is better according to all 5 metrics in both environments. Overall, we found that our proposal follows more realistic assumptions and still allows nodes to succeed at discovering all their neighbors almost with probability 1. Moreover, a qualitative comparison of the reference solution and our proposal is included in this paper.This work has been partially supported by the "Ministerio de Economia y Competitividad" in the "Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia, Subprograma Estatal de Generacion de Conocimiento" within the project under Grant TIN2017-84802-C2-1-P. This work has also been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR. This work has also been partially founded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program.Sorribes, JV.; Peñalver Herrero, ML.; Jimenez, JM.; Sendra, S. (2022). Energy-aware Randomized Neighbor Discovery Protocol based on Collision Detection in Wireless Ad Hoc Networks. Mobile Networks and Applications (Online). 28:31-48. https://doi.org/10.1007/s11036-022-01995-731482

Application of advanced on-board processing concepts to future satellite communications systems

An initial definition of on-board processing requirements for an advanced satellite communications system to service domestic markets in the 1990's is presented. An exemplar system architecture with both RF on-board switching and demodulation/remodulation baseband processing was used to identify important issues related to system implementation, cost, and technology development

Architecting a One-to-many Traffic-Aware and Secure Millimeter-Wave Wireless Network-in-Package Interconnect for Multichip Systems

With the aggressive scaling of device geometries, the yield of complex Multi Core Single Chip(MCSC) systems with many cores will decrease due to the higher probability of manufacturing defects especially, in dies with a large area. Disintegration of large System-on-Chips(SoCs) into smaller chips called chiplets has shown to improve the yield and cost of complex systems. Therefore, platform-based computing modules such as embedded systems and micro-servers have already adopted Multi Core Multi Chip (MCMC) architectures overMCSC architectures. Due to the scaling of memory intensive parallel applications in such systems, data is more likely to be shared among various cores residing in different chips resulting in a significant increase in chip-to-chip traffic, especially one-to-many traffic. This one-to-many traffic is originated mainly to maintain cache-coherence between many cores residing in multiple chips. Besides, one-to-many traffics are also exploited by many parallel programming models, system-level synchronization mechanisms, and control signals. How-ever, state-of-the-art Network-on-Chip (NoC)-based wired interconnection architectures do not provide enough support as they handle such one-to-many traffic as multiple unicast trafficusing a multi-hop MCMC communication fabric. As a result, even a small portion of such one-to-many traffic can significantly reduce system performance as traditional NoC-basedinterconnect cannot mask the high latency and energy consumption caused by chip-to-chipwired I/Os. Moreover, with the increase in memory intensive applications and scaling of MCMC systems, traditional NoC-based wired interconnects fail to provide a scalable inter-connection solution required to support the increased cache-coherence and synchronization generated one-to-many traffic in future MCMC-based High-Performance Computing (HPC) nodes. Therefore, these computation and memory intensive MCMC systems need an energy-efficient, low latency, and scalable one-to-many (broadcast/multicast) traffic-aware interconnection infrastructure to ensure high-performance. Research in recent years has shown that Wireless Network-in-Package (WiNiP) architectures with CMOS compatible Millimeter-Wave (mm-wave) transceivers can provide a scalable, low latency, and energy-efficient interconnect solution for on and off-chip communication. In this dissertation, a one-to-many traffic-aware WiNiP interconnection architecture with a starvation-free hybrid Medium Access Control (MAC), an asymmetric topology, and a novel flow control has been proposed. The different components of the proposed architecture are individually one-to-many traffic-aware and as a system, they collaborate with each other to provide required support for one-to-many traffic communication in a MCMC environment. It has been shown that such interconnection architecture can reduce energy consumption and average packet latency by 46.96% and 47.08% respectively for MCMC systems. Despite providing performance enhancements, wireless channel, being an unguided medium, is vulnerable to various security attacks such as jamming induced Denial-of-Service (DoS), eavesdropping, and spoofing. Further, to minimize the time-to-market and design costs, modern SoCs often use Third Party IPs (3PIPs) from untrusted organizations. An adversary either at the foundry or at the 3PIP design house can introduce a malicious circuitry, to jeopardize an SoC. Such malicious circuitry is known as a Hardware Trojan (HT). An HTplanted in the WiNiP from a vulnerable design or manufacturing process can compromise a Wireless Interface (WI) to enable illegitimate transmission through the infected WI resulting in a potential DoS attack for other WIs in the MCMC system. Moreover, HTs can be used for various other malicious purposes, including battery exhaustion, functionality subversion, and information leakage. This information when leaked to a malicious external attackercan reveals important information regarding the application suites running on the system, thereby compromising the user profile. To address persistent jamming-based DoS attack in WiNiP, in this dissertation, a secure WiNiP interconnection architecture for MCMC systems has been proposed that re-uses the one-to-many traffic-aware MAC and existing Design for Testability (DFT) hardware along with Machine Learning (ML) approach. Furthermore, a novel Simulated Annealing (SA)-based routing obfuscation mechanism was also proposed toprotect against an HT-assisted novel traffic analysis attack. Simulation results show that,the ML classifiers can achieve an accuracy of 99.87% for DoS attack detection while SA-basedrouting obfuscation could reduce application detection accuracy to only 15% for HT-assistedtraffic analysis attack and hence, secure the WiNiP fabric from age-old and emerging attacks

Proceedings of the Mobile Satellite Conference

A satellite-based mobile communications system provides voice and data communications to mobile users over a vast geographic area. The technical and service characteristics of mobile satellite systems (MSSs) are presented and form an in-depth view of the current MSS status at the system and subsystem levels. Major emphasis is placed on developments, current and future, in the following critical MSS technology areas: vehicle antennas, networking, modulation and coding, speech compression, channel characterization, space segment technology and MSS experiments. Also, the mobile satellite communications needs of government agencies are addressed, as is the MSS potential to fulfill them