An approach for implementing efficient superscalar cisc processors

An integrated, hardware / software co-designed CISC processor is proposed and analyzed. The objectives are high performance and reduced complexity. Although the x86 ISA is targeted, the overall approach is applicable to other CISC ISAs. To provide high performance on frequently executed code sequences, fully transparent dynamic translation software decomposes CISC superblocks into RISC-style micro-ops. Then, pairs of dependent micro-ops are reordered and fused into macro-ops held in a large, concealed code cache. The macro-ops are fetched from the code cache and processed throughout the pipeline as single units. Consequently, instruction level communication and management are reduced, and processor resources such as the issue buffer and register file ports are better utilized. Moreover, fused instructions lead naturally to pipelined instruction scheduling (issue) logic, and collapsed 3-1 ALUs can be used, resulting in much simplified result forwarding logic. Steady state performance is evaluated for the SPEC2000 benchmarks,, and a proposed x86 implementation with complexity similar to a two-wide superscalar processor is shown to provide performance (instructions per cycle) that is equivalent to a conventional four-wide superscalar processor. 1

Design of a distributed memory unit for clustered microarchitectures

Power constraints led to the end of exponential growth in single–processor performance, which characterized the semiconductor industry for many years. Single–chip multiprocessors allowed the performance growth to continue so far. Yet, Amdahl’s law asserts that the overall performance of future single–chip multiprocessors will depend crucially on single–processor performance. In a multiprocessor a small growth in single–processor performance can justify the use of significant resources. Partitioning the layout of critical components can improve the energy–efficiency and ultimately the performance of a single processor. In a clustered microarchitecture parts of these components form clusters. Instructions are processed locally in the clusters and benefit from the smaller size and complexity of the clusters components. Because the clusters together process a single instruction stream communications between clusters are necessary and introduce an additional cost. This thesis proposes the design of a distributed memory unit and first level cache in the context of a clustered microarchitecture. While the partitioning of other parts of the microarchitecture has been well studied the distribution of the memory unit and the cache has received comparatively little attention. The first proposal consists of a set of cache bank predictors. Eight different predictor designs are compared based on cost and accuracy. The second proposal is the distributed memory unit. The load and store queues are split into smaller queues for distributed disambiguation. The mapping of memory instructions to cache banks is delayed until addresses have been calculated. We show how disambiguation can be implemented efficiently with unordered queues. A bank predictor is used to map instructions that consume memory data near the data origin. We show that this organization significantly reduces both energy usage and latency. The third proposal introduces Dispatch Throttling and Pre-Access Queues. These mechanisms avoid load/store queue overflows that are a result of the late allocation of entries. The fourth proposal introduces Memory Issue Queues, which add functionality to select instructions for execution and re-execution to the memory unit. The fifth proposal introduces Conservative Deadlock Aware Entry Allocation. This mechanism is a deadlock safe issue policy for the Memory Issue Queues. Deadlocks can result from certain queue allocations because entries are allocated out-of-order instead of in-order like in traditional architectures. The sixth proposal is the Early Release of Load Queue Entries. Architectures with weak memory ordering such as Alpha, PowerPC or ARMv7 can take advantage of this mechanism to release load queue entries before the commit stage. Together, these proposals allow significantly smaller and more energy efficient load queues without the need of energy hungry recovery mechanisms and without performance penalties. Finally, we present a detailed study that compares the proposed distributed memory unit to a centralized memory unit and confirms its advantages of reduced energy usage and of improved performance

HW/SW mechanisms for instruction fusion, issue and commit in modern u-processors

In this thesis we have explored the co-designed paradigm to show alternative processor design points. Specifically, we have provided HW/SW mechanisms for instruction fusion, issue and commit for modern processors. We have implemented a co-designed virtual machine monitor that binary translates x86 instructions into RISC like micro-ops. Moreover, the translations are stored as superblocks, which are a trace of basic blocks. These superblocks are further optimized using speculative and non-speculative optimizations. Hardware mechanisms exists in-order to take corrective action in case of misspeculations. During the course of this PhD we have made following contributions. Firstly, we have provided a novel Programmable Functional unit, in-order to speed up general-purpose applications. The PFU consists of a grid of functional units, similar to CCA, and a distributed internal register file. The inputs of the macro-op are brought from the Physical Register File to the internal register file using a set of moves and a set of loads. A macro-op fusion algorithm fuses micro-ops at runtime. The fusion algorithm is based on a scheduling step that indicates whether the current fused instruction is beneficial or not. The micro-ops corresponding to the macro-ops are stored as control signals in a configuration. The macro-op consists of a configuration ID which helps in locating the configurations. A small configuration cache is present inside the Programmable Functional unit, that holds these configurations. In case of a miss in the configuration cache configurations are loaded from I-Cache. Moreover, in-order to support bulk commit of atomic superblocks that are larger than the ROB we have proposed a speculative commit mechanism. For this we have proposed a Speculative commit register map table that holds the mappings of the speculatively committed instructions. When all the instructions of the superblock have committed the speculative state is copied to Backend Register Rename Table. Secondly, we proposed a co-designed in-order processor with with two kinds of accelerators. These FU based accelerators run a pair of fused instructions. We have considered two kinds of instruction fusion. First, we fused a pair of independent loads together into vector loads and execute them on vector load units. For the second kind of instruction fusion we have fused a pair of dependent simple ALU instructions and execute them in Interlock Collapsing ALUs (ICALU). Moreover, we have evaluated performance of various code optimizations such as list-scheduling, load-store telescoping and load hoisting among others. We have compared our co-designed processor with small instruction window out-of-order processors. Thirdly, we have proposed a co-designed out-of-order processor. Specifically we have reduced complexity in two areas. First of all, we have co-designed the commit mechanism, that enable bulk commit of atomic superblocks. In this solution we got rid of the conventional ROB, instead we introduce the Superblock Ordering Buffer (SOB). SOB ensures program order is maintained at the granularity of the superblock, by bulk committing the program state. The program state consists of the register state and the memory state. The register state is held in a per superblock register map table, whereas the memory state is held in gated store buffer and updated in bulk. Furthermore, we have tackled the complexity of Out-of-Order issue logic by using FIFOs. We have proposed an enhanced steering heuristic that fixes the inefficiencies of the existing dependence-based heuristic. Moreover, a mechanism to release the FIFO entries earlier is also proposed that further improves the performance of the steering heuristic.En aquesta tesis hem explorat el paradigma de les màquines issue i commit per processadors actuals. Hem implementat una màquina virtual que tradueix binaris x86 a micro-ops de tipus RISC. Aquestes traduccions es guarden com a superblocks, que en realitat no és més que una traça de virtuals co-dissenyades. En particular, hem proposat mecanismes hw/sw per a la fusió d’instruccions, blocs bàsics. Aquests superblocks s’optimitzen utilitzant optimizacions especualtives i d’altres no speculatives. En cas de les optimizations especulatives es consideren mecanismes per a la gestió de errades en l’especulació. Al llarg d’aquesta tesis s’han fet les següents contribucions: Primer, hem proposat una nova unitat functional programmable (PFU) per tal de millorar l’execució d’aplicacions de proposit general. La PFU està formada per un conjunt d’unitats funcionals, similar al CCA, amb un banc de registres intern a la PFU distribuït a les unitats funcionals que la composen. Les entrades de la macro-operació que s’executa en la PFU es mouen del banc de registres físic convencional al intern fent servir un conjunt de moves i loads. Un algorisme de fusió combina més micro-operacions en temps d’execució. Aquest algorisme es basa en un pas de planificació que mesura el benefici de les decisions de fusió. Les micro operacions corresponents a la macro operació s’emmagatzemen com a senyals de control en una configuració. Les macro-operacions tenen associat un identificador de configuració que ajuda a localitzar d’aquestes. Una petita cache de configuracions està present dintre de la PFU per tal de guardar-les. En cas de que la configuració no estigui a la cache, les configuracions es carreguen de la cache d’instruccions. Per altre banda, per tal de donar support al commit atòmic dels superblocks que sobrepassen el tamany del ROB s’ha proposat un mecanisme de commit especulatiu. Per aquest mecanisme hem proposat una taula de mapeig especulativa dels registres, que es copia a la taula no especulativa quan totes les instruccions del superblock han comitejat. Segon, hem proposat un processador en order co-dissenyat que combina dos tipus d’acceleradors. Aquests acceleradors executen un parell d’instruccions fusionades. S’han considerat dos tipus de fusió d’instructions. Primer, combinem un parell de loads independents formant loads vectorials i els executem en una unitat vectorial. Segon, fusionem parells d’instruccions simples d’alu que són dependents i que s’executaran en una Interlock Collapsing ALU (ICALU). Per altra aquestes tecniques les hem evaluat conjuntament amb diverses optimizacions com list scheduling, load-store telescoping i hoisting de loads, entre d’altres. Aquesta proposta ha estat comparada amb un processador fora d’ordre. Tercer, hem proposat un processador fora d’ordre co-dissenyat efficient reduint-ne la complexitat en dos areas principals. En primer lloc, hem co-disenyat el mecanisme de commit per tal de permetre un eficient commit atòmic del superblocks. En aquesta solució hem substituït el ROB convencional, i en lloc hem introduït el Superblock Ordering Buffer (SOB). El SOB manté l’odre de programa a granularitat de superblock. L’estat del programa consisteix en registres i memòria. L’estat dels registres es manté en una taula per superblock, mentre que l’estat de memòria es guarda en un buffer i s’actulitza atòmicament. La segona gran area de reducció de complexitat considerarada és l’ús de FIFOs a la lògica d’issue. En aquest últim àmbit hem proposat una heurística de distribució que solventa les ineficiències de l’heurística basada en dependències anteriorment proposada. Finalment, i junt amb les FIFOs, s’ha proposat un mecanisme per alliberar les entrades de la FIFO anticipadament

Customizing the Computation Capabilities of Microprocessors.

Designers of microprocessor-based systems must constantly improve performance and increase computational efficiency in their designs to create value. To this end, it is increasingly common to see computation accelerators in general-purpose processor designs. Computation accelerators collapse portions of an application's dataflow graph, reducing the critical path of computations, easing the burden on processor resources, and reducing energy consumption in systems. There are many problems associated with adding accelerators to microprocessors, though. Design of accelerators, architectural integration, and software support all present major challenges. This dissertation tackles these challenges in the context of accelerators targeting acyclic and cyclic patterns of computation. First, a technique to identify critical computation subgraphs within an application set is presented. This technique is hardware-cognizant and effectively generates a set of instruction set extensions given a domain of target applications. Next, several general-purpose accelerator structures are quantitatively designed using critical subgraph analysis for a broad application set. The next challenge is architectural integration of accelerators. Traditionally, software invokes accelerators by statically encoding new instructions into the application binary. This is incredibly costly, though, requiring many portions of hardware and software to be redesigned. This dissertation develops strategies to utilize accelerators, without changing the instruction set. In the proposed approach, the microarchitecture translates applications at run-time, replacing computation subgraphs with microcode to utilize accelerators. We explore the tradeoffs in performing difficult aspects of the translation at compile-time, while retaining run-time replacement. This culminates in a simple microarchitectural interface that supports a plug-and-play model for integrating accelerators into a pre-designed microprocessor. Software support is the last challenge in dealing with computation accelerators. The primary issue is difficulty in generating high-quality code utilizing accelerators. Hand-written assembly code is standard in industry, and if compiler support does exist, simple greedy algorithms are common. In this work, we investigate more thorough techniques for compiling for computation accelerators. Where greedy heuristics only explore one possible solution, the techniques in this dissertation explore the entire design space, when possible. Intelligent pruning methods ensure that compilation is both tractable and scalable.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/57633/2/ntclark_1.pd