Capacity Analysis of IEEE 802.11ah WLANs for M2M Communications

Focusing on the increasing market of the sensors and actuators networks, the IEEE 802.11ah Task Group is currently working on the standardization of a new amendment. This new amendment will operate at the sub-1GHz band, ensure transmission ranges up to 1 Km, data rates above 100 kbps and very low power operation. With IEEE 802.11ah, the WLANs will offer a solution for applications such as smart metering, plan automation, eHealth or surveillance. Moreover, thanks to a hierarchical signalling, the IEEE 802.11ah will be able to manage a higher number of stations (STAs) and improve the 802.11 Power Saving Mechanisms. In order to support a high number of STAs, two different signalling modes are proposed, TIM and Non-TIM Offset. In this paper we present a theoretical model to predict the maximum number of STAs supported by both modes depending on the traffic load and the data rate used. Moreover, the IEEE 802.11ah performance and energy consumption for both signalling modes and for different traffic patterns and data rates is evaluated. Results show that both modes achieve similar Packet Delivery Ratio values but the energy consumed with the TIM Offset is, in average, a 11.7% lower.Comment: Multiple Access Communications 201

A Feasibility Analysis of the Use of IEEE 802.11ah to extend 4G Network Coverage

The 4G LTE network has been launched in many countries including Indonesia, and all telecommunications operators are competing to expand their service coverage. Due to various reasons, there are a lot of areas that remains uncovered by the 4G LTE network. With the increase in cellular traffic, operators must continue to improve their service coverage. One of the scenarios to expand the service coverage is by offloading the traffic to a more cost-effective 802.11ah network in which one 802.11ah access point can serve thousands of mobile devices and support the Machine-to-Machine (M2M)/Internet of Things (IoT) communication. This study simulates the effect of the number of nodes on MCS performance evaluation of the 802.11ah protocol. The simulation is conducted by utilizing NS3 software to evaluate the throughput, delay, packet delivery ratio and energy consumption. This study also simulates 802.11ah coverage prediction to expand the LTE networks by utilizing Atoll Radio Planning Software. The results show that the performance obtained by varying the number of nodes/users from 100 to 1000 nodes is technically acceptable. In addition, the service coverage of 802.11ah network can solve the problem of blank spot area

An Energy-Efficient Scheme for IoT Networks

With the advent of the Internet of Things era, "things-things interconnection" has become a new concept, that is, through the informatization and networking of the physical world, the traditionally separated physical world and the information world are interconnected and integrated. Different from the concept of connecting people in the information world in the Internet, the Internet of Things extends its tentacles to all aspects of the physical world. The proposed algorithm considers the periodical uplink data transmission in IEEE 802.11ah LWPAN and a real-time raw settings method is used. The uplink channel resources were divided into Beacon periods after the multiple nodes send data to the access point. First, the access point predicted the next data uploading time during the Beacon period. In the next Beacon period, the total number of devices that will upload data is predicted. Then, the optimal read-and-write parameters were calculated for minimum energy cost and broadcasted such information to all nodes. After this, the data is uploaded according the read-and-write scheduling by all the devices. Simulation results show that the proposed algorithm effectively improved the network state prediction accuracy and dynamically adjusted the configuration parameters which results in improved network energy efficiency in the IoT environment

Goodbye, ALOHA!

©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft