Advanced Multi-Channel SAR Imaging - Measured Data Demonstration

Synthetic Aperture Radar (SAR) is a well-established technique for remote sensing of the Earth. However, conventional SAR systems relying on only a single transmit and receive aperture are not capable of imaging a wide swath with high spatial resolution. Multi-channel SAR concepts, such as systems based on multiple receive apertures in azimuth, promise to overcome these restrictions, thus enabling high-resolution wide-swath imaging. Analysis revealed that these systems imperatively require sophisticated digital processing of the received signals in order to guarantee full performance independently of the spatial sample distribution imposed by the applied pulse repetition frequency (PRF). A suitable algorithm to cope with these challenges of multi-channel data is given by the “multi-channel reconstruction algorithm”, which demonstrated in comprehensive analysis and system design examples its potential for high perform-ance SAR imaging. In this context, various optimization strategies were investigated and aspects of operating multi-channel systems in burst modes such as ScanSAR or TOPS were discussed. Furthermore, a first proof-of-principle showed the algorithm’s applicability to measured multi-channel X-band data gathered by the German Aerospace Cen-ter’s (DLR) airborne F-SAR system. As a next step in the framework of multi-channel azimuth processing, this paper builds on the results recalled above and continues two paths. Firstly, focus is turned to further optimization of the proc-essing algorithm by investigating the classical Space-Time Adaptive Processing (STAP) applied to SAR. Secondly, attention is turned to the analysis of the measured multi-channel data by elaborating the impact and compensation of channel mismatch and by verifying the derived theory

Novel multipath mitigation methods using a dual-polarization antenna

There are many methods for mitigating GNSS multipath errors. However, none of them completely eliminate the effects of multipath or suit all GNSS applications. A new class of multipath mitigation methods exploit new dual-polarization antenna technology. GNSS signals received direct from the satellites have right-handed circular polarization (RHCP), whereas (singly) reflected signals have left-handed circular polarization (LHCP) or an elliptical polarization that may be expressed as the sum of RHCP and LHCP components. Conventional GNSS user antennas are more sensitive to signals with RHCP, attenuating LHCP signals and reducing, but not eliminating, the multipath errors in the receiver. An antenna with the opposite polarization sensitivity will attenuate the direct signals more than the reflected signals. This can be used to characterizing the reflected signals and thus mitigate the effects of multipath interference.Experimental work using an Antcom dual-polarization antenna and dual geodetic receivers is presented. This verifies that carrier power to noise density, C/N-0, measurements obtained by separately correlating the RHCP and LHCP antenna outputs can be used to distinguish between a low-multipath and moderate-multipath environment. This may be used as the basis of a multipath detection technique.Three different multipath mitigation techniques that use a dual-polarization antenna are proposed. Measurement weighting estimates the code and carrier multipath error standard deviation from the RHCP-LHCP C/N-0 difference and elevation angle. This is used by the navigation processor to discard and reweight measurements. Range-domain multipath correction, uses the pseudo-range, carrier-phase and C/N-0 differences between the outputs of RHCP and LHCP receiver tracking channels, together with antenna calibration data, to estimate corrections to the code and carrier measurements. In tracking-domain multipath mitigation, the RHCP and LHCP correlator outputs are input to common acquisition and tracking algorithms which attempt to separate the direct line of sight and reflected signalsThe design of a novel dual-input GNSS front end, based on direct RF sampling, is presented This will be used, in conjunction with a software GNSS receiver, for future development and testing of multipath mitigation using a dual-polarization antenna

A two-step multifrequency imaging technique for ground penetrating radar

In the present paper, a combined method for ground penetrating radar imaging is presented. The proposed technique has a first step in which the electric field scattered by the buried structure is estimated and a qualitative reconstruction is obtained, and a second quantitative inversion step for reconstructing the dielectric properties of the buried targets. The full-wave multifrequency inexact-Newton inversion approach used in the second step uses the information about the target position extracted by the qualitative procedure and takes the scattered field data estimated by a time-domain filtering method. Numerical simulations are presented to prove the effectiveness of the proposed technique

An extensive and autonomous deep space navigation system using radio pulsars

Interstellar navigation poses significant challenges in all aspects of a spacecraft. One of them is reliable, low-cost, real-time navigation, especially when there is a considerable distance between Earth and the spacecraft in question. In this paper, a complete system for navigation using pulsar radio emissions is described and analysed. The system uses a pulsar‟s emissions in the radio spectrum to create a novel system capable of fully autonomous navigation. The system is roughly divided into two parts, the front - end and the back - end, as well as their subdivisions. The front - end performs initial signal reception and pre-processing. It applies time-based coherent de-dispersion to allow for low-power on-board processing, and uses a very wide bandwidth to limit the required antenna size. As a result, the electronics required performing the processing is complex, but the system is well limited in both size and power consumption

X-linked hypomyelination with spondylometaphyseal dysplasia (H-SMD) associated with mutations in AIFM1

An X-linked condition characterized by the combination of hypomyelinating leukodystrophy and spondylometaphyseal dysplasia (H-SMD) has been observed in only four families, with linkage to Xq25-27, and recent genetic characterization in two families with a common AIFM1 mutation. In our study, 12 patients (6 families) with H-SMD were identified and underwent comprehensive assessment accompanied by whole-exome sequencing (WES). Pedigree analysis in all families was consistent with X-linked recessive inheritance. Presentation typically occurred between 12 and 36 months. In addition to the two disease-defining features of spondylometaphyseal dysplasia and hypomyelination on MRI, common clinical signs and symptoms included motor deterioration, spasticity, tremor, ataxia, dysarthria, cognitive defects, pulmonary hypertension, nystagmus, and vision loss due to retinopathy. The course of the disease was slowly progressive. All patients had maternally inherited or de novo mutations in or near exon 7 of AIFM1, within a region of 70 bp, including synonymous and intronic changes. AIFM1 mutations have previously been associated with neurologic presentations as varied as intellectual disability, hearing loss, neuropathy, and striatal necrosis, while AIFM1 mutations in this small region present with a distinct phenotype implicating bone. Analysis of cell lines derived from four patients identified significant reductions in AIFM1 mRNA and protein levels in osteoblasts. We hypothesize that AIFM1 functions in bone metabolism and myelination and is responsible for the unique phenotype in this condition.</p

Compact source detection in multi-channel microwave surveys: from SZ clusters to polarized sources

In this paper we describe the state-of-the art status of multi-frequency detection techniques for compact sources in microwave astronomy. From the simplest cases where the spectral behaviour is well-known (i.e. thermal SZ clusters) to the more complex cases where there is little a priori information (i.e. polarized radio sources) we will review the main advances and the most recent results in the detection problem.Comment: 13 pages, 4 figures. Accepted for publication in the Special Issue "Astrophysical Foregrounds in Microwave Surveys" of the journal Advances in Astronom

OFDM Synthetic Aperture Radar Imaging with Sufficient Cyclic Prefix

The existing linear frequency modulated (LFM) (or step frequency) and random noise synthetic aperture radar (SAR) systems may correspond to the frequency hopping (FH) and direct sequence (DS) spread spectrum systems in the past second and third generation wireless communications. Similar to the current and future wireless communications generations, in this paper, we propose OFDM SAR imaging, where a sufficient cyclic prefix (CP) is added to each OFDM pulse. The sufficient CP insertion converts an inter-symbol interference (ISI) channel from multipaths into multiple ISI-free subchannels as the key in a wireless communications system, and analogously, it provides an inter-range-cell interference (IRCI) free (high range resolution) SAR image in a SAR system. The sufficient CP insertion along with our newly proposed SAR imaging algorithm particularly for the OFDM signals also differentiates this paper from all the existing studies in the literature on OFDM radar signal processing. Simulation results are presented to illustrate the high range resolution performance of our proposed CP based OFDM SAR imaging algorithm.Comment: This version has been accepted by IEEE Transactions on Geoscience and Remote Sensing. IEEE Transactions on Geoscience and Remote Sensing 201

Parallel 3-D marine controlled-source electromagnetic modelling using high-order tetrahedral Nédélec elements

We present a parallel and high-order Nédélec finite element solution for the marine controlled-source electromagnetic (CSEM) forward problem in 3-D media with isotropic conductivity. Our parallel Python code is implemented on unstructured tetrahedral meshes, which support multiple-scale structures and bathymetry for general marine 3-D CSEM modelling applications. Based on a primary/secondary field approach, we solve the diffusive form of Maxwell’s equations in the low-frequency domain. We investigate the accuracy and performance advantages of our new high-order algorithm against a low-order implementation proposed in our previous work. The numerical precision of our high-order method has been successfully verified by comparisons against previously published results that are relevant in terms of scale and geological properties. A convergence study confirms that high-order polynomials offer a better trade-off between accuracy and computation time. However, the optimum choice of the polynomial order depends on both the input model and the required accuracy as revealed by our tests. Also, we extend our adaptive-meshing strategy to high-order tetrahedral elements. Using adapted meshes to both physical parameters and high-order schemes, we are able to achieve a significant reduction in computational cost without sacrificing accuracy in the modelling. Furthermore, we demonstrate the excellent performance and quasi-linear scaling of our implementation in a state-of-the-art high-performance computing architecture.This project has received funding from the European Union's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No. 777778. Furthermore, the research leading to these results has received funding from the European Union's Horizon 2020 programme under the ChEESE Project (https://cheese-coe.eu/ ), grant agreement No. 823844. In addition, the authors would also like to thank the support of the Ministerio de Educación y Ciencia (Spain) under Projects TEC2016-80386-P and TIN2016-80957-P. The authors would like to thank the Editors-in-Chief and to both reviewers, Dr. Martin Cuma and Dr. Raphael Rochlitz, for their valuable comments and suggestions which helped to improve the quality of the manuscript. This work benefited from the valuable suggestions, comments, and proofreading of Dr. Otilio Rojas (BSC). Last but not least, Octavio Castillo-Reyes thanks Natalia Gutierrez (BSC) for her support in CSEM modeling with BSIT.Peer ReviewedPostprint (author's final draft

IRCI Free Range Reconstruction for SAR Imaging with Arbitrary Length OFDM Pulse

Our previously proposed OFDM with sufficient cyclic prefix (CP) synthetic aperture radar (SAR) imaging algorithm is inter-range-cell interference (IRCI) free and achieves ideally zero range sidelobes for range reconstruction. In this OFDM SAR imaging algorithm, the minimum required CP length is almost equal to the number of range cells in a swath, while the number of subcarriers of an OFDM signal needs to be more than the CP length. This makes the length of a transmitted OFDM sequence at least almost twice of the number of range cells in a swath and for a wide swath imaging, the transmitted OFDM pulse length becomes long, which may cause problems in some radar applications. In this paper, we propose a CP based OFDM SAR imaging with arbitrary pulse length, which has IRCI free range reconstruction and its pulse length is independent of a swath width. We then present a novel design method for our proposed arbitrary length OFDM pulses. Simulation results are presented to illustrate the performances of the OFDM pulse design and the arbitrary pulse length CP based OFDM SAR imaging.Comment: 29 pages, 10 figures, regular pape