On-board B-ISDN fast packet switching architectures. Phase 2: Development. Proof-of-concept architecture definition report

For the next-generation packet switched communications satellite system with onboard processing and spot-beam operation, a reliable onboard fast packet switch is essential to route packets from different uplink beams to different downlink beams. The rapid emergence of point-to-point services such as video distribution, and the large demand for video conference, distributed data processing, and network management makes the multicast function essential to a fast packet switch (FPS). The satellite's inherent broadcast features gives the satellite network an advantage over the terrestrial network in providing multicast services. This report evaluates alternate multicast FPS architectures for onboard baseband switching applications and selects a candidate for subsequent breadboard development. Architecture evaluation and selection will be based on the study performed in phase 1, 'Onboard B-ISDN Fast Packet Switching Architectures', and other switch architectures which have become commercially available as large scale integration (LSI) devices

Architectural Considerations for Photonic Switching Networks

Photonic technologies are reviewed that could become important components of future telecommunication systems. Photonic devices and systems are divided into two classes according to the function they perform. The first class, relational, refers to devices, that map the input channels to the output channels under external control. The second class, logic, perform some type or combination of Boolean logic functions. Some of the strengths and weaknesses of operating in the photonic domain are presented. Relational devices and their applications are discussed. Optical logic devices and their potential applications are reviewed

Symmetric rearrangeable networks and algorithms

A class of symmetric rearrangeable nonblocking networks has been considered in this thesis. A particular focus of this thesis is on Benes networks built with 2 x 2 switching elements. Symmetric rearrangeable networks built with larger switching elements have also being considered. New applications of these networks are found in the areas of System on Chip (SoC) and Network on Chip (NoC). Deterministic routing algorithms used in NoC applications suffer low scalability and slow execution time. On the other hand, faster algorithms are blocking and thus limit throughput. This will be an acceptable trade-off for many applications where achieving ”wire speed” on the on-chip network would require extensive optimisation of the attached devices. In this thesis I designed an algorithm that has much lower blocking probabilities than other suboptimal algorithms but a much faster execution time than deterministic routing algorithms. The suboptimal method uses the looping algorithm in its outermost stages and then in the two distinct subnetworks deeper in the switch uses a fast but suboptimal path search method to find available paths. The worst case time complexity of this new routing method is O(NlogN) using a single processor, which matches the best known results reported in the literature. Disruption of the ongoing communications in this class of networks during rearrangements is an open issue. In this thesis I explored a modification of the topology of these networks which gives rise to what is termed as repackable networks. A repackable topology allows rearrangements of paths without intermittently losing connectivity by breaking the existing communication paths momentarily. The repackable network structure proposed in this thesis is efficient in its use of hardware when compared to other proposals in the literature. As most of the deterministic algorithms designed for Benes networks implement a permutation of all inputs to find the routing tags for the requested inputoutput pairs, I proposed a new algorithm that can work for partial permutations. If the network load is defined as ρ, the mean number of active inputs in a partial permutation is, m = ρN, where N is the network size. This new method is based on mapping the network stages into a set of sub-matrices and then determines the routing tags for each pair of requests by populating the cells of the sub-matrices without creating a blocking state. Overall the serial time complexity of this method is O(NlogN) and O(mlogN) where all N inputs are active and with m < N active inputs respectively. With minor modification to the serial algorithm this method can be made to work in the parallel domain. The time complexity of this routing algorithm in a parallel machine with N completely connected processors is O(log^2 N). With m active requests the time complexity goes down to (logmlogN), which is better than the O(log^2 m + logN), reported in the literature for 2^0.5((log^2 -4logN)^0.5-logN)<= ρ <= 1. I also designed multistage symmetric rearrangeable networks using larger switching elements and implement a new routing algorithm for these classes of networks. The network topology and routing algorithms presented in this thesis should allow large scale networks of modest cost, with low setup times and moderate blocking rates, to be constructed. Such switching networks will be required to meet the bandwidth requirements of future communication networks

Wavelength locking of silicon photonics multiplexer for DML-based WDM transmitter

We present a wavelength locking platform enabling the feedback control of silicon (Si) microring resonators (MRRs) for the realization of a 4 × 10 Gb/s wavelength-division-multiplexing (WDM) transmitter. Four thermally tunable Si MRRs are employed to multiplex the signals generated by four directly modulated lasers (DMLs) operating in the L-band, as well as to improve the quality of the DMLs signals. Feedback control is achieved through a field-programmable gate array controller by monitoring the working point of each MRR through a transparent detector integrated inside the resonator. The feedback system provides an MRR wavelength stability of about 4 pm (0.5 GHz) with a time response of 60 ms. Bit error rate (BER) measurements confirm the effectiveness and the robustness of the locking system to counteract sensitivity degradations due to thermal drifts, even under uncooled operation conditions for the Si chip

On-board B-ISDN fast packet switching architectures. Phase 1: Study

The broadband integrate services digital network (B-ISDN) is an emerging telecommunications technology that will meet most of the telecommunications networking needs in the mid-1990's to early next century. The satellite-based system is well positioned for providing B-ISDN service with its inherent capabilities of point-to-multipoint and broadcast transmission, virtually unlimited connectivity between any two points within a beam coverage, short deployment time of communications facility, flexible and dynamic reallocation of space segment capacity, and distance insensitive cost. On-board processing satellites, particularly in a multiple spot beam environment, will provide enhanced connectivity, better performance, optimized access and transmission link design, and lower user service cost. The following are described: the user and network aspects of broadband services; the current development status in broadband services; various satellite network architectures including system design issues; and various fast packet switch architectures and their detail designs

Optical Wireless Data Center Networks

Bandwidth and computation-intensive Big Data applications in disciplines like social media, bio- and nano-informatics, Internet-of-Things (IoT), and real-time analytics, are pushing existing access and core (backbone) networks as well as Data Center Networks (DCNs) to their limits. Next generation DCNs must support continuously increasing network traffic while satisfying minimum performance requirements of latency, reliability, flexibility and scalability. Therefore, a larger number of cables (i.e., copper-cables and fiber optics) may be required in conventional wired DCNs. In addition to limiting the possible topologies, large number of cables may result into design and development problems related to wire ducting and maintenance, heat dissipation, and power consumption. To address the cabling complexity in wired DCNs, we propose OWCells, a class of optical wireless cellular data center network architectures in which fixed line of sight (LOS) optical wireless communication (OWC) links are used to connect the racks arranged in regular polygonal topologies. We present the OWCell DCN architecture, develop its theoretical underpinnings, and investigate routing protocols and OWC transceiver design. To realize a fully wireless DCN, servers in racks must also be connected using OWC links. There is, however, a difficulty of connecting multiple adjacent network components, such as servers in a rack, using point-to-point LOS links. To overcome this problem, we propose and validate the feasibility of an FSO-Bus to connect multiple adjacent network components using NLOS point-to-point OWC links. Finally, to complete the design of the OWC transceiver, we develop a new class of strictly and rearrangeably non-blocking multicast optical switches in which multicast is performed efficiently at the physical optical (lower) layer rather than upper layers (e.g., application layer). Advisors: Jitender S. Deogun and Dennis R. Alexande

Investigation of Ring Waveguide Add/Drop with Grating Couple

The silicon photon technology platform is low transmission loss, small size, low cost of the process and easy integration with electronic components and other characteristics. It is designed to design high-density optical communication network system has a considerable advantage. Such as high-density wavelength division multiplexing (DWDM) system, that is through the different wavelengths of signal processing. So that it can be used for optical connection switches, routing and other applications. It composed of a DWDM system, through the Mach-Zehnder interferometer, ring resonator (Add/Drop), array waveguide grating (AWG) and grating coupler and other structural components. It is designed by components to filter, switch, adjust and detect functions. The characteristics of the ring resonator are for wavelength selection. It is suitable for the design of optical switches, signal switching and modulation applications. It is also the focus of this lab and this chapter to explore and study. The general edge coupling, between the optical fiber and the waveguide dimension is very different. As a result, larger insertion loss is caused. This study uses the vertical coupling method to investigate the characteristics of a ring resonator

Switching considerations in storage networks.

by Leung Yiu Tong.Thesis (M.Phil.)--Chinese University of Hong Kong, 2003.Includes bibliographical references (leaves 96-98).Abstracts in English and Chinese.Chapter 1. --- Introduction --- p.1Chapter 1.1 --- Motivation --- p.1Chapter 1.2 --- Thesis Organization --- p.3Chapter 2. --- Storage Network Fundamentals --- p.4Chapter 2.1 --- Storage Network Topology --- p.4Chapter 2.1.1 --- Direct Attached Storage (DAS) --- p.5Chapter 2.1.2 --- Network Attached Storage (NAS) --- p.7Chapter 2.1.3 --- Storage Area Network (SAN) --- p.9Chapter 2.1.3.1 --- SAN and the Fibre Channel Protocol --- p.11Chapter 2.1.4 --- Summary on Storage Network Topology --- p.12Chapter 2.2 --- Storage Protocol --- p.15Chapter 2.2.1 --- Fibre Channel --- p.15Chapter 2.2.1.1 --- Fibre Channel over IP (FCIP) --- p.17Chapter 2.2.1.2 --- Internet Fibre Channel Protocol (iFCP) --- p.19Chapter 2.2.2 --- Internet SCSI (iSCSI) --- p.20Chapter 2.2.3 --- InfiniBand --- p.22Chapter 2.2.4 --- Review on Storage Network Protocol --- p.25Chapter 2.3 --- Standard Organization --- p.27Chapter 2.4 --- Summary --- p.28Chapter 3. --- Switching Design for Storage Networks --- p.30Chapter 3.1. --- Shared Bus Design --- p.32Chapter 3.2. --- Time Division Switch --- p.36Chapter 3.3. --- Share Buffer Memory Switch --- p.37Chapter 3.3.1 --- Parallel Memory Array --- p.40Chapter 3.3.2 --- Distributive Storage --- p.43Chapter 3.4. --- Crossbar Switch --- p.45Chapter 3.4.1 --- Arbitrated Crossbar vs. Buffered Crossbar --- p.46Chapter 3.4.1.1 --- Arbitrated Crossbar Switch --- p.47Chapter 3.4.1.2 --- Buffered Crossbar Switch --- p.48Chapter 3.4.2 --- Switch Scheduling --- p.49Chapter 3.4.2.1 --- Bipartite Matching --- p.50Chapter 3.4.2.2 --- Token-based Distributive Scheduling --- p.53Chapter 3.4.2.3 --- Resource Counting using Semaphore --- p.56Chapter 3.5. --- Algebraic Switches --- p.60Chapter 3.5.1 --- Switching by Conditionally Nonblocking Properties --- p.61Chapter 3.5.2 --- Self-Routing Mechanism with Zero-Bit Buffering --- p.64Chapter 3.5.3 --- Multistage Interconnection of Self-routing Concentrators --- p.69Chapter 3.6. --- Summary --- p.73Chapter 4. --- Investigating Switching Issue in Storage Networks --- p.74Chapter 4.1 --- Choosing a Suitable Switch --- p.74Chapter 4.2 --- Quality of Service (QoS) --- p.76Chapter 4.3 --- Multicasting --- p.77Chapter 4.3.1 --- Crossbar Switch --- p.78Chapter 4.3.2 --- Shared-Buffer Memory Switches --- p.80Chapter 4.3.3 --- Algebraic Switch --- p.82Chapter 4.3.4 --- Application on Multicast Transmission --- p.86Chapter 4.4 --- Load Balancing Mechanism --- p.87Chapter 4.5 --- Optimization on Storage Utilization --- p.91Chapter 4.6 --- Summary --- p.93Chapter 5. --- Conclusion and Summary of Original Contributions --- p.9

Architectural Exploration and Design Methodologies of Photonic Interconnection Networks

Photonic technology is becoming an increasingly attractive solution to the problems facing today's electronic chip-scale interconnection networks. Recent progress in silicon photonics research has enabled the demonstration of all the necessary optical building blocks for creating extremely high-bandwidth density and energy-efficient links for on- and off-chip communications. From the feasibility and architecture perspective however, photonics represents a dramatic paradigm shift from traditional electronic network designs due to fundamental differences in how electronics and photonics function and behave. As a result of these differences, new modeling and analysis methods must be employed in order to properly realize a functional photonic chip-scale interconnect design. In this work, we present a methodology for characterizing and modeling fundamental photonic building blocks which can subsequently be combined to form full photonic network architectures. We also describe a set of tools which can be utilized to assess the physical-layer and system-level performance properties of a photonic network. The models and tools are integrated in a novel open-source design and simulation environment called PhoenixSim. Next, we leverage PhoenixSim for the study of chip-scale photonic networks. We examine several photonic networks through the synergistic study of both physical-layer metrics and system-level metrics. This holistic analysis method enables us to provide deeper insight into architecture scalability since it considers insertion loss, crosstalk, and power dissipation. In addition to these novel physical-layer metrics, traditional system-level metrics of bandwidth and latency are also obtained. Lastly, we propose a novel routing architecture known as wavelength-selective spatial routing. This routing architecture is analogous to electronic virtual channels since it enables the transmission of multiple logical optical channels through a single physical plane (i.e. the waveguides). The available wavelength channels are partitioned into separate groups, and each group is routed independently in the network. Each partition is spectrally multiplexed, as opposed to temporally multiplexed in the electronic case. The wavelength-selective spatial routing technique benefits network designers by provider lower contention and increased path diversity

High capacity photonic integrated switching circuits

As the demand for high-capacity data transfer keeps increasing in high performance computing and in a broader range of system area networking environments; reconfiguring the strained networks at ever faster speeds with larger volumes of traffic has become a huge challenge. Formidable bottlenecks appear at the physical layer of these switched interconnects due to its energy consumption and footprint. The energy consumption of the highly sophisticated but increasingly unwieldy electronic switching systems is growing rapidly with line rate, and their designs are already being constrained by heat and power management issues. The routing of multi-Terabit/second data using optical techniques has been targeted by leading international industrial and academic research labs. So far the work has relied largely on discrete components which are bulky and incurconsiderable networking complexity. The integration of the most promising architectures is required in a way which fully leverages the advantages of photonic technologies. Photonic integration technologies offer the promise of low power consumption and reduced footprint. In particular, photonic integrated semiconductor optical amplifier (SOA) gate-based circuits have received much attention as a potential solution. SOA gates exhibit multi-terahertz bandwidths and can be switched from a high-gain state to a high-loss state within a nanosecond using low-voltage electronics. In addition, in contrast to the electronic switching systems, their energy consumption does not rise with line rate. This dissertation will discuss, through the use of different kind of materials and integration technologies, that photonic integrated SOA-based optoelectronic switches can be scalable in either connectivity or data capacity and are poised to become a key technology for very high-speed applications. In Chapter 2, the optical switching background with the drawbacks of optical switches using electronic cores is discussed. The current optical technologies for switching are reviewed with special attention given to the SOA-based switches. Chapter 3 discusses the first demonstrations using quantum dot (QD) material to develop scalable and compact switching matrices operating in the 1.55µm telecommunication window. In Chapter 4, the capacity limitations of scalable quantum well (QW) SOA-based multistage switches is assessed through experimental studies for the first time. In Chapter 5 theoretical analysis on the dependence of data integrity as ultrahigh line-rate and number of monolithically integrated SOA-stages increases is discussed. Chapter 6 presents some designs for the next generation of large scale photonic integrated interconnects. A 16x16 switch architecture is described from its blocking properties to the new miniaturized elements proposed. Finally, Chapter 7 presents several recommendations for future work, along with some concluding remark