An Aging-Aware GPU Register File Design Based on Data Redundancy

"© 2019 IEEE. Personal use of this material is permitted. Permissíon from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertisíng or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works."[EN] Nowadays, GPUs sit at the forefront of high-performance computing thanks to their massive computational capabilities. Internally, thousands of functional units, architected to be fed by large register files, fuel such a performance. At deep nanometer technologies, the SRAM memory cells that implement GPU register files are very sensitive to the Negative Bias Temperature Instability (NBTI) effect. NBTI ages cell transistors by degrading their threshold voltage Vth over the lifetime of the GPU. This degradation, which manifests when a cell keeps the same logic value for a relatively long period of time, compromises the cell read stability and increases the transistor switching delay, which can lead to wrong read values and eventually exceed the processor cycle time, respectively, so resulting in faulty operation. Thiswork proposes architectural mechanisms leveraging the redundancy of the data stored in GPU register files to attack NBTI aging. The proposed mechanisms are based on data compression, power gating, and register address rotation techniques. All these mechanismsworking together balance the distribution of logic values stored in the cells along the execution time, reducing both the overall Vth degradation and the increase in the transistor switching delays. Experimental results show that a conventional GPU register file suffers the worst case for NBTI, since a significant fraction of the cells maintain the same logic value during the entire application execution (i.e., a 100 percent '0' and '1' duty cycle distributions). On average, the proposal reduces these distributions by 58 and 68 percent, respectively, which translates into Vth degradation savings by 54 and 62 percent, respectively.This work was supported by the Gobierno de Aragon and the European ESF (gaZ: T58_17R research group), and by the Ministerio de Economia y Competitividad (MINECO) and AEI/FEDER (EU) funds under Grants TIN2016-76635-C2-1-R and TIN2015-66972-C5-1-R.Valero Bresó, A.; Candel-Margaix, F.; Suárez-Gracia, D.; Petit Martí, SV.; Sahuquillo Borrás, J. (2019). An Aging-Aware GPU Register File Design Based on Data Redundancy. IEEE Transactions on Computers. 68(1):4-20. https://doi.org/10.1109/TC.2018.2849376S42068

CU2rCU: A CUDA-to-rCUDA Converter

[ES] Las GPUs (Graphics Processor Units, unidades de procesamiento gráfico) están siendo cada vez más utilizadas en el campo de la HPC (High Performance Computing, computación de altas prestaciones) como una forma eficaz de reducir el tiempo de ejecución de las aplicaciones mediante la aceleración de determinadas partes de las mismas. CUDA (Compute Unified Device Architecture, arquitectura de dispositivos de cómputo unificado) es una tecnología desarrollada por NVIDIA que permite llevar a cabo dicha aceleración, proporcionando para ello una arquitectura de cálculo paralelo. Sin embargo, la utilización de GPUs en el ámbito de la HPC presenta ciertas desventajas, principalmente, en el coste de adquisición y el aumento de energía que introducen. Para hacer frente a estos inconvenientes se desarrolló rCUDA (remote CUDA, CUDA remoto), una tecnología que permite compartir dispositivos CUDA de forma remota, reduciendo así tanto el coste de adquisición como el consumo de energía. En las versiones iniciales de rCUDA quedó demostrada su viabilidad, pero también se identificaron algunos aspectos susceptibles de ser mejorados en relación con su usabilidad. Ésta se veía afectada por el hecho de que rCUDA no soporta las extensiones de CUDA al lenguaje C. De esta forma, era necesario convertir manualmente las aplicaciones CUDA eliminando dichas extensiones, y utilizando únicamente C plano. En este documento presentamos una herramienta que realiza éstas conversiones de manera automática, permitiendo así adaptar las aplicaciones CUDA a rCUDA de una manera sencilla[EN] GPUs (Graphics Processor Units) are being increasingly embraced by the high performance computing and computational communities as an effective way of considerably reducing application execution time by accelerating significant parts of their codes. CUDA (Compute Unified Device Architecture) is a new technology developed by NVIDIA which leverages the parallel compute engine in GPUs. However, the use of GPUs in current HPC clusters presents certain negative side-effects, mainly related with acquisition costs and power consumption. rCUDA (remote CUDA) was recently developed as a software solution to address these concerns. Specifically, it is a middleware that allows transparently sharing a reduced number of CUDA-compatible GPUs among the nodes in a cluster, reducing acquisition costs and power consumption. While the initial prototype versions of rCUDA demonstrated its functionality, they also revealed several concerns related with usability and performance. With respect to usability, the rCUDA framework was limited by its lack of support for the CUDA extensions to the C language. Thus, it was necessary to manually convert the original CUDA source code into C plain code functionally identical but that does not include such extensions. For such purpose, in this document we present a new component of the rCUDA suite that allows an automatic transformation of any CUDA source code into plain C code, so that it can be effectively accommodated within the rCUDA technology.Reaño González, C. (2012). CU2rCU: A CUDA-to-rCUDA Converter. http://hdl.handle.net/10251/27435Archivo delegad

Fast algorithm for real-time rings reconstruction

The GAP project is dedicated to study the application of GPU in several contexts in which real-time response is important to take decisions. The definition of real-time depends on the application under study, ranging from answer time of μs up to several hours in case of very computing intensive task. During this conference we presented our work in low level triggers [1] [2] and high level triggers [3] in high energy physics experiments, and specific application for nuclear magnetic resonance (NMR) [4] [5] and cone-beam CT [6]. Apart from the study of dedicated solution to decrease the latency due to data transport and preparation, the computing algorithms play an essential role in any GPU application. In this contribution, we show an original algorithm developed for triggers application, to accelerate the ring reconstruction in RICH detector when it is not possible to have seeds for reconstruction from external trackers

Multi-level simulation of nano-electronic digital circuits on GPUs

Simulation of circuits and faults is an essential part in design and test validation tasks of contemporary nano-electronic digital integrated CMOS circuits. Shrinking technology processes with smaller feature sizes and strict performance and reliability requirements demand not only detailed validation of the functional properties of a design, but also accurate validation of non-functional aspects including the timing behavior. However, due to the rising complexity of the circuit behavior and the steady growth of the designs with respect to the transistor count, timing-accurate simulation of current designs requires a lot of computational effort which can only be handled by proper abstraction and a high degree of parallelization. This work presents a simulation model for scalable and accurate timing simulation of digital circuits on data-parallel graphics processing unit (GPU) accelerators. By providing compact modeling and data-structures as well as through exploiting multiple dimensions of parallelism, the simulation model enables not only fast and timing-accurate simulation at logic level, but also massively-parallel simulation with switch level accuracy. The model facilitates extensions for fast and efficient fault simulation of small delay faults at logic level, as well as first-order parametric and parasitic faults at switch level. With the parallelization on GPUs, detailed and scalable simulation is enabled that is applicable even to multi-million gate designs. This way, comprehensive analyses of realistic timing-related faults in presence of process- and parameter variations are enabled for the first time. Additional simulation efficiency is achieved by merging the presented methods in a unified simulation model, that allows to combine the unique advantages of the different levels of abstraction in a mixed-abstraction multi-level simulation flow to reach even higher speedups. Experimental results show that the implemented parallel approach achieves unprecedented simulation throughput as well as high speedup compared to conventional timing simulators. The underlying model scales for multi-million gate designs and gives detailed insights into the timing behavior of digital CMOS circuits, thereby enabling large-scale applications to aid even highly complex design and test validation tasks

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

Fundamentals

Volume 1 establishes the foundations of this new field. It goes through all the steps from data collection, their summary and clustering, to different aspects of resource-aware learning, i.e., hardware, memory, energy, and communication awareness. Machine learning methods are inspected with respect to resource requirements and how to enhance scalability on diverse computing architectures ranging from embedded systems to large computing clusters

Fundamentals

Volume 1 establishes the foundations of this new field. It goes through all the steps from data collection, their summary and clustering, to different aspects of resource-aware learning, i.e., hardware, memory, energy, and communication awareness. Machine learning methods are inspected with respect to resource requirements and how to enhance scalability on diverse computing architectures ranging from embedded systems to large computing clusters

Cross-Layer Approaches for an Aging-Aware Design of Nanoscale Microprocessors

Thanks to aggressive scaling of transistor dimensions, computers have revolutionized our life. However, the increasing unreliability of devices fabricated in nanoscale technologies emerged as a major threat for the future success of computers. In particular, accelerated transistor aging is of great importance, as it reduces the lifetime of digital systems. This thesis addresses this challenge by proposing new methods to model, analyze and mitigate aging at microarchitecture-level and above