30 research outputs found
A review on massive MIMO Antennas for 5G communication systems on challenges and limitations
High data rate transfers, high-definition streaming, high-speed internet, and the expanding of the infrastructure such as the ultra-broadband communication systems in wireless communication have become a demand to be considered in improving quality of service and increase the capacity supporting gigabytes bitrate. Massive Multiple-Input Multiple-Output (MIMO) systems technology is evolving from MIMO systems and becoming a high demand for fifth-generation (5G) communication systems and keep expanding further. In the near future, massive MIMO systems could be the main wireless systems of communications technology and can be considered as a key technology to the system in daily lives. The arrangement of the huge number of antenna elements at the base station (BS) for uplink and downlink to support the MIMO systems in increasing its capacity is called a Massive MIMO system, which refers to the vast provisioning of antenna elements at base stations over the number of the single antenna of user equipment. Massive MIMO depends on spatial multiplexing and diversity gain in serving users with simple processing signal of uplink and downlink at the BS. There are challenges in massive MIMO system even though it contains numerous number of antennas, such as channel estimation need to be accurate, precoding at the BS, and signal detection which is related to the first two items. On the other hand, in supporting wideband cellular communication systems and enabling low latency communications and multi-gigabit data rates, the Millimeter-wave (mmWave) technology has been utilized. Also, it is widely influenced the potential of the fifth-generation (5G) New Radio (NR) standard. This study was specifically review and compare on a few designs and methodologies on massive MIMO antenna communication systems. There are three limitations of those antennas were identified to be used for future improvement and to be proposed in designing the massive MIMO antenna systems. A few suggestions to improve the weaknesses and to overcome the challenges have been proposed for future consideration
A review on massive MIMO antennas for 5G communication systems on challenges and limitations
High data rate transfers, high-definition streaming, high-speed internet, and the expanding of the infrastructure such as the ultra-broadband communication systems in wireless communication have become a demand to be considered in improving quality of service and increase the capacity supporting gigabytes bitrate. Massive Multiple-Input MultipleOutput (MIMO) systems technology is evolving from MIMO systems and becoming a high demand for fifth-generation (5G) communication systems and keep expanding further. In the near future, massive MIMO systems could be the main wireless systems of communications technology and can be considered as a key technology to the system in daily lives. The arrangement of the huge number of antenna elements at the base station (BS) for uplink and downlink to support the MIMO systems in increasing its capacity is called a Massive MIMO system, which refers to the vast provisioning of antenna elements at base stations over the number of the single antenna of user equipment. Massive MIMO depends on spatial multiplexing and diversity gain in serving users with simple processing signal of uplink and downlink at the BS. There are challenges in massive MIMO system even though it contains numerous number of antennas, such as channel estimation need to be accurate, precoding at the BS, and signal detection which is related to the first two items. On the other hand, in supporting wideband cellular communication systems and enabling low latency communications and multigigabit data rates, the Millimeter-wave (mmWave) technology has been utilized. Also, it is widely influenced the potential of the fifth-generation (5G) New Radio (NR) standard. This study was specifically review and compare on a few designs and methodologies on massive MIMO antenna communication systems. There are three limitations of those antennas were identified to be used for future improvement and to be proposed in designing the massive MIMO antenna systems. A few suggestions to improve the weaknesses and to overcome the challenges have been proposed for future considerations
A Survey on Wireless Security: Technical Challenges, Recent Advances and Future Trends
This paper examines the security vulnerabilities and threats imposed by the
inherent open nature of wireless communications and to devise efficient defense
mechanisms for improving the wireless network security. We first summarize the
security requirements of wireless networks, including their authenticity,
confidentiality, integrity and availability issues. Next, a comprehensive
overview of security attacks encountered in wireless networks is presented in
view of the network protocol architecture, where the potential security threats
are discussed at each protocol layer. We also provide a survey of the existing
security protocols and algorithms that are adopted in the existing wireless
network standards, such as the Bluetooth, Wi-Fi, WiMAX, and the long-term
evolution (LTE) systems. Then, we discuss the state-of-the-art in
physical-layer security, which is an emerging technique of securing the open
communications environment against eavesdropping attacks at the physical layer.
We also introduce the family of various jamming attacks and their
counter-measures, including the constant jammer, intermittent jammer, reactive
jammer, adaptive jammer and intelligent jammer. Additionally, we discuss the
integration of physical-layer security into existing authentication and
cryptography mechanisms for further securing wireless networks. Finally, some
technical challenges which remain unresolved at the time of writing are
summarized and the future trends in wireless security are discussed.Comment: 36 pages. Accepted to Appear in Proceedings of the IEEE, 201
Energy-driven techniques for massive machine-type communications
In the last few years, a lot of effort has been put into the development of the fifth generation of cellular networks (5G). Given the vast heterogeneity of devices coexisting in these networks, new approaches have been sought to meet all requirements (e.g., data rate, coverage, delay, etc.). Within that framework, massive machine-type communications (mMTC) emerge as a promising candidate to enable many Internet of Things applications.
mMTC define a type of systems where large sets of simple and battery-constrained devices transmit short data packets simultaneously. Unlike other 5G use cases, in mMTC, a low cost and power consumption are extensively pursued. Due to these specifications, typical humantype communications (HTC) solutions fail in providing a good service.
In this dissertation, we focus on the design of energy-driven techniques for extending the lifetime of mMTC terminals. Both uplink (UL) and downlink (DL) stages are addressed, with special attention to the traffic models and spatial distribution of the devices. More specifically, we analyze a setup where groups of randomly deployed sensors send their (possibly correlated) observations to a collector node using different multiple access schemes. Depending on their activity, information might be transmitted either on a regular or sporadic basis.
In that sense, we explore resource allocation, data compression, and device selection strategies to reduce the energy consumption in the UL. To further improve the system performance, we also study medium access control protocols and interference management techniques that take into account the large connectivity in these networks. On the contrary, in the DL, we concentrate on the support of wireless powered networks through different types of energy supply mechanisms, for which proper transmission schemes are derived. Additionally, for a better representation of current 5G deployments, the presence of HTC terminals is also included.
Finally, to evaluate our proposals, we present several numerical simulations following standard guidelines. In line with that, we also compare our approaches with state-of-the-art solutions. Overall, results show that the power consumption in the UL can be reduced with still good performance and that the battery lifetimes can be improved thanks to the DL strategies.En els Ăşltims anys, s'han dedicat molts esforços al desenvolupament de la cinquena generaciĂł de telefonia mòbil (5G). Donada la gran heterogeneĂŻtat de dispositius coexistint en aquestes xarxes, s'han buscat nous mètodes per satisfer tots els requisits (velocitat de dades, cobertura, retard, etc.). En aquest marc, les massive machine-type communications (mMTC) sorgeixen com a candidates prometedores per fer possible moltes aplicacions del Internet of Things. Les mMTC defineixen un tipus de sistemes en els quals grans conjunts de dispositius senzills i amb poca bateria, transmeten simultĂ niament paquets de dades curts. A diferència d'altres casos d'Ăşs del 5G, en mMTC es persegueix un cost i un consum d'energia baixos. A causa d'aquestes especificacions, les solucions tĂpiques de les human-type communications (HTC) no aconsegueixen proporcionar un bon servei. En aquesta tesi, ens centrem en el disseny de tècniques basades en l'energia per allargar la vida Ăştil dels terminals mMTC. S'aborden tant les etapes del uplink (UL) com les del downlink (DL), amb especial atenciĂł als models de trĂ nsit i a la distribuciĂł espacial dels dispositius. MĂ©s concretament, analitzem un escenari en el qual grups de sensors desplegats aleatòriament, envien les seves observacions (possiblement correlades) a un node col·lector utilitzant diferents esquemes d'accĂ©s mĂşltiple. Depenent de la seva activitat, la informaciĂł es pot transmetre de manera regular o esporĂ dica. En aquest sentit, explorem estratègies d'assignaciĂł de recursos, compressiĂł de dades, i selecciĂł de dispositius per reduir el consum d'energia en el UL. Per millorar encara mĂ©s el rendiment del sistema, tambĂ© estudiem protocols de control d'accĂ©s al medi i tècniques de gestiĂł d'interferències que tinguin en compte la gran connectivitat d'aquestes xarxes. Per contra, en el DL, ens centrem en el suport de les wireless powered networks mitjançant diferents mecanismes de subministrament d'energia, per als quals es deriven esquemes de transmissiĂł adequats. A mĂ©s, per una millor representaciĂł dels desplegaments 5G actuals, tambĂ© s'inclou la presència de terminals HTC. Finalment, per avaluar les nostres propostes, presentem diverses simulacions numèriques seguint pautes estandarditzades. En aquesta lĂnia, tambĂ© comparem els nostres enfocaments amb les solucions de l'estat de l'art. En general, els resultats mostren que el consum d'energia en el UL pot reduir-se amb un bon rendiment i que la durada de la bateria pot millorar-se grĂ cies a les estratègies del DL.En los Ăşltimos años, se han dedicado muchos esfuerzos al desarrollo de la quinta generaciĂłn de telefonĂa mĂłvil (5G). Dada la gran heterogeneidad de dispositivos coexistiendo en estas redes, se han buscado nuevos mĂ©todos para satisfacer todos los requisitos (velocidad de datos, cobertura, retardo, etc.). En este marco, las massive machine-type communications (mMTC) surgen como candidatas prometedoras para hacer posible muchas aplicaciones del Internet of Things.
Las mMTC definen un tipo de sistemas en los cuales grandes conjuntos de dispositivos sencillos y con poca baterĂa, transmiten simultáneamente paquetes de datos cortos. A diferencia de otros casos de uso del 5G, en mMTC se persigue un coste y un consumo de energĂa bajos. A causa de estas especificaciones, las soluciones tĂpicas de las human-type communications (HTC) no consiguen proporcionar un buen servicio.
En esta tesis, nos centramos en el diseño de tĂ©cnicas basadas en la energĂa para alargar la vida ´útil de los terminales mMTC. Se abordan tanto las etapas del uplink (UL) como las del downlink (DL), con especial atenciĂłn a los modelos de tráfico y a la distribuciĂłn espacial de los dispositivos. Más concretamente, analizamos un escenario en el cual grupos de sensores desplegados aleatoriamente, envĂan sus observaciones (posiblemente correladas) a un nodo colector utilizando diferentes esquemas de acceso mĂşltiple. Dependiendo de su actividad, la informaciĂłn se puede transmitir de manera regular o esporádica.
En este sentido, exploramos estrategias de asignaciĂłn de recursos, compresiĂłn de datos, y selecciĂłn de dispositivos para reducir el consumo de energĂa en el UL. Para mejorar todavĂa más el rendimiento del sistema, tambiĂ©n estudiamos protocolos de control de acceso al medio y tĂ©cnicas de gestiĂłn de interferencias que tengan en cuenta la gran conectividad de estas redes.
Por el contrario, en el DL, nos centramos en el soporte de las wireless powered networks mediante diferentes mecanismos de suministro de energĂa, para los cuales se derivan esquemas de transmisiĂłn adecuados. Además, para una mejor representaciĂłn de los despliegues 5G actuales, tambiĂ©n se incluye la presencia de terminales HTC.
Finalmente, para evaluar nuestras propuestas, presentamos varias simulaciones numĂ©ricas siguiendo pautas estandarizadas. En esta lĂnea, tambiĂ©n comparamos nuestros enfoques con las soluciones del estado del arte. En general, los resultados muestran que el consumo de energĂa en el UL puede reducirse con un buen rendimiento y que la duraciĂłn de la baterĂa puede mejorarse gracias a las estrategias del DLPostprint (published version
Wireless communication, sensing, and REM: A security perspective
The diverse requirements of next-generation communication systems necessitate awareness, flexibility, and intelligence as essential building blocks of future wireless networks. The awareness can be obtained from the radio signals in the environment using wireless sensing and radio environment mapping (REM) methods. This is, however, accompanied by threats such as eavesdropping, manipulation, and disruption posed by malicious attackers. To this end, this work analyzes the wireless sensing and radio environment awareness mechanisms, highlighting their vulnerabilities and provides solutions for mitigating them. As an example, the different threats to REM and its consequences in a vehicular communication scenario are described. Furthermore, the use of REM for securing communications is discussed and future directions regarding sensing/REM security are highlighted
Beyond Massive MIMO : Trade-offs and Opportunities with Large Multi-Antenna Systems
After the commercial emergence of 5G, the research community is already putting its focus on proposing innovative solutions to enable the upcoming 6G. One important lesson put forth by 5G research was that scaling up the conventional multiple-input-multiple-output (MIMO) technology by increasing the number of antennas could be extremely beneficial for effectively multiplexing data streams in the spatial domain. This idea was embodied in massive MIMO, which constitutes one of the major technical advancements included in 5G. Consequently, 6G research efforts have been largely directed towards studying ways to further scale up wireless systems, as can be seen in some of the proposed 6G enabling technologies like large intelligent surface (LIS), cell-free massive MIMO, or even reconfigurable intelligent surface (RIS). This thesis studies the possibilities offered by some of these technologies, as well as the trade-offs that may naturally arise when scaling up such wireless systems.An important part of this thesis deals with decentralized solutions for base station (BS) technologies including a large number of antennas. Already in the initial massive MIMO prototypes, the increased number of BS antennas led to scalability issues due to the high interconnection bandwidths required to send the received signals---as well as the channel state information (CSI)---to a central processing unit (CPU) in charge of the data processing. These issues can only be exacerbated if we consider novel system proposals like LIS, where the number of BS antennas may be increased by an order of magnitude with respect to massive MIMO, or cell-free massive MIMO, where the BS antennas may be located far from each other. We provide a number of decentralized schemes to process the received data while restricting the information that has to be shared with a CPU. We also provide a framework to study architectures with an arbitrary level of decentralization, showing that there exists a direct trade-off between the interconnection bandwidth to a CPU and the complexity of the decentralized processing required for fixed user rates.Another part of this thesis studies RIS-based solutions to enhance the multiplexing performance of wireless communication systems. RIS constitutes one of the most attractive 6G enabling technologies since it provides a cost- and energy-efficient solution to improve the wireless propagation links by generating favorable reflections. We extend the concept of RIS by considering reconfigurable surfaces (RSs) with different processing capabilities, and we show how these surfaces may be employed for achieving perfect spatial multiplexing at reduced processing complexity in general multi-antenna communication settings. We also show that these surfaces can exploit the available degrees of freedom---e.g., due to excess of BS antennas---to embed their own data into the enhanced channel
Massive MIMO and Full-duplex Relaying Systems
In this thesis, we study how massive multiple-input and multiple-output (MIMO) can be employed to mitigate loop-interference (LI), multi-user interference and noise in a full-duplex (FD) relaying system. For a FD relaying system with massive MIMO deployed at both source and destination, we investigate three FD relaying schemes: co-located, distributed cooperative, and distributed non-cooperative relaying. Asymptotic analysis shows that the three schemes can completely cancel multi-user interference and LI when the number of antennas at the source and destination grows without bound, in the case where the relay has a finite number of antennas. For the system with massive MIMO deployed at the FD relay, we propose a pilot protocol for LI channel minimum-mean-square-error estimation by exploiting the channel coherence time difference between static and moving transceivers. To maximize the end-to-end achievable rate, we design a novel power allocation scheme to adjust the transmit power of each link at the relay in order to equalize the achievable rate of the source-to-relay and relay-to-destination links. The analytical and numerical results show that the proposed pilot protocol and power allocation scheme jointly improve both spectral and energy efficiency significantly. To enable the use of low resolution analog-to-digital converters (ADCs) at relays for energy saving, we propose a novel iterative power allocation scheme to mitigate the resulting quantization noise via reducing the received LI power and numerically identify the optimum resolutions of ADCs for maximizing throughput and energy efficiency. For massive MIMO receivers employing one-bit ADCs, we propose three carrier frequency (CFO) offset estimation schemes for dual-pilot and multiple-pilot cases. The three schemes are developed under different scenarios: large but finite number of antennas at the receiver, infinite number of antennas at the receiver, and very small CFO, respectively
Cooperative Radio Communications for Green Smart Environments
The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin
Cooperative Radio Communications for Green Smart Environments
The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin