Antennas and Propagation Aspects for Emerging Wireless Communication Technologies

The increasing demand for high data rate applications and the delivery of zero-latency multimedia content drives technological evolutions towards the design and implementation of next-generation broadband wireless networks. In this context, various novel technologies have been introduced, such as millimeter wave (mmWave) transmission, massive multiple input multiple output (MIMO) systems, and non-orthogonal multiple access (NOMA) schemes in order to support the vision of fifth generation (5G) wireless cellular networks. The introduction of these technologies, however, is inextricably connected with a holistic redesign of the current transceiver structures, as well as the network architecture reconfiguration. To this end, ultra-dense network deployment along with distributed massive MIMO technologies and intermediate relay nodes have been proposed, among others, in order to ensure an improved quality of services to all mobile users. In the same framework, the design and evaluation of novel antenna configurations able to support wideband applications is of utmost importance for 5G context support. Furthermore, in order to design reliable 5G systems, the channel characterization in these frequencies and in the complex propagation environments cannot be ignored because it plays a significant role. In this Special Issue, fourteen papers are published, covering various aspects of novel antenna designs for broadband applications, propagation models at mmWave bands, the deployment of NOMA techniques, radio network planning for 5G networks, and multi-beam antenna technologies for 5G wireless communications

An adaptable fuzzy-based model for predicting link quality in robot networks.

It is often essential for robots to maintain wireless connectivity with other systems so that commands, sensor data, and other situational information can be exchanged. Unfortunately, maintaining sufficient connection quality between these systems can be problematic. Robot mobility, combined with the attenuation and rapid dynamics associated with radio wave propagation, can cause frequent link quality (LQ) issues such as degraded throughput, temporary disconnects, or even link failure. In order to proactively mitigate such problems, robots must possess the capability, at the application layer, to gauge the quality of their wireless connections. However, many of the existing approaches lack adaptability or the framework necessary to rapidly build and sustain an accurate LQ prediction model. The primary contribution of this dissertation is the introduction of a novel way of blending machine learning with fuzzy logic so that an adaptable, yet intuitive LQ prediction model can be formed. Another significant contribution includes the evaluation of a unique active and incremental learning framework for quickly constructing and maintaining prediction models in robot networks with minimal sampling overhead

Wireless power transmission para drones

Mestrado em Engenharia Eletrónica e TelecomunicaçõesDrones are unmanned aerial vehicles that have proliferated the market due to their low cost and the many applications that can already be associated to them. Besides the common use of these devices for playful activities, as aerial event recording, they demonstrate an enormous potential in other applications, such as military, as search and rescue or reconnaissance missions, or commercial, for example: surveillance and inspection of crops. However, most commercial devices currently available suffer from a major drawback in terms of their dependence of batteries which, in consequence of the large energy demand supplied to the drone's engines, quickly discharge. In addition, the weight of these batteries typically implies that more power is needed to keep the drone flying. This drawback can be overcome, or attenuated, using dedicated wireless power transmission systems that enable the devices to maintain flight without the need of batteries or simply charging them while in use. Throughout this dissertation a microwave wireless power transmission system working at 5.8 GHz will be described in detail, with emphasis on the design of the microstrip antenna array developed to allow directive transmission and the rectenna proposed for reception and power conversion. The proposed system allows the used quadcopter to boot and link with its remote control and demonstrates the potential to be adapted for other purposes.Drone é a designação normalmente atribuída a veículos aéreos não tripulados que se têm proliferado no mercado devido ao seu baixo custo e inúmeras aplicações. Além do seu uso em actividades lúdicas, como o já comum registo aéreo de eventos, demonstram um enorme potencial noutras aplicações, tanto militares, missões de busca e salvamento e reconhecimento de terreno, como comerciais, sendo exemplo a vigilância e inspecção de campos de colheita. No entanto, maioria dos dispositivos comerciais actualmente disponíveis padecem de uma grande limitação no que toca à sua dependência de baterias que, de modo a alimentar os motores do drone, rapidamente se descarregam. Além disso, o peso que estas baterias implicam levam a que seja necessária uma maior potência para que o drone se mantenha a voar. Estes problemas podem ser contornados, ou atenuados, recorrendo a sistemas de transmissão dedicada de energia electromagnética que possibilitem aos dispositivos manter vôo sem recurso a baterias ou carregando-as quando em uso. Ao longo desta dissertação será descrito em detalhe um sistema de transferência de energia sem fios projectado para trabalhar à frequência de 5.8 GHz, dando ênfase ao desenho de um agregado de antenas microstrip, desenvolvido para possibilitar uma transmissão directiva, e a rectenna proposta para recepção da energia electromagnética e sua conversão em corrente contínua. O sistema proposto possibilita ao quadricóptero ter energia suficiente para se conseguir ligar e estabelecer comunicação com o seu controlo remoto sendo que a arquitectura proposta demonstra potencial para ser adaptada em futuras abordagens

Synthetic Aperture Digital Beamsteering Array for Global Positioning System Interference Mitigation: A Study on Array Topology

The Global Positioning System (GPS) satellite navigation system is deeply intertwined with civilian everyday life. Unfortunately for the civilians that use the system, the GPS system is vulnerable to external interference. Antenna arrays with Direction of Arrival (DoA) signal identification and beamsteering provide a very effective technique for mitigating directional interference by moving the antenna gain toward the Signal of Interest (SOI) or away from the Signal not of Interest (SNOI), however, such systems are typically too large to integrate or require more processing capabilities than civilian devices are able to provide. Synthetic aperture arrays are a means to reduce the array size but provide a similar interference protection with a smaller processing capability overhead. This thesis assists in array selection by providing simulated gains of different switched antenna arrays. The Uniform Circular Array (UCA), rectangular array, random array, random full aperture, random sequential, ring (UCA random hybrid) topologies are evaluated. In a pure synthetic beamsteering system in the presence of continuous wave (CW) interference, it is determined that array topology has marginal impact on Signal to Interference Noise Ratio (SINR) as each array's results show very similar performance. With the two CW scenarios in the absence of null steering, the UCA maintains the highest performance using the smallest number of antenna elements

New frequency reconfigurable antennas for wide frequency range tuning

Frequency reconfigurable antennas are becoming a compelling solution for the increasing demand of higher antenna capabilities, since they can operate at tunable narrow frequency bands while rejecting the undesirable signals from other bands. The aim of this project is to develop new designs for frequency reconfigurable antennas that can work across a wide frequency range (from 1 GHz up to 6 GHz) while maintaining stable radiation pattern and polarisation as required by the industry sponsors. A Vivaldi antenna is considered as the basis for a frequency reconfigurable design as it maintains the radiation characteristics in its operating band. Dual-band, tri-band and quad-band switched reconfigurable designs are proposed and analysed. These antennas are electronically-tuned using RF switches which adjust the impedance to reconfigure the operating band of the antenna. A prototype is tested in an anechoic chamber obtaining good performance. However, as the switches lead to several challenges, such as the effect of bias lines and the excessive insertion losses, a new approach is taken. State-of-the-art technologies are studied and fluid antennas are introduced. Current developments show that liquid antennas can have radiation efficiencies up to 90 % and conductivities close to copper, which makes them a good candidate to fulfil the requirements of this project. A hybrid Vivaldi antenna with an ionised water switch is proposed and a prototype tested. By introducing ionised water into a specific point of the feed line the operating frequency of the antenna is adjusted. The replacement of RF switches for electronically-controlled fluids brings high flexibility, suppression of the bias lines impact, dynamic adjustment and continuous frequency tuning compared to conventional antenna systems

Space-Air-Ground Integrated 6G Wireless Communication Networks: A Review of Antenna Technologies and Application Scenarios

A review of technological solutions and advances in the framework of a Vertical Heterogeneous Network (VHetNet) integrating satellite, airborne and terrestrial networks is presented. The disruptive features and challenges offered by a fruitful cooperation among these segments within a ubiquitous and seamless wireless connectivity are described. The available technologies and the key research directions for achieving global wireless coverage by considering all these layers are thoroughly discussed. Emphasis is placed on the available antenna systems in satellite, airborne and ground layers by highlighting strengths and weakness and by providing some interesting trends in research. A summary of the most suitable applicative scenarios for future 6G wireless communications are finally illustrated

Control of an indoor autonomous mobile communications relay via antenna diversity

Presented in this thesis is a motion planning scheme for enabling a quadrotor unmanned aerial vehicle (UAV) to serve as an autonomous communications relay in indoor or GPS-denied environments. The goal of the algorithm is to maximize the throughput of the end-to-end communications channel. An extremum-seeking controller steers the quadrotor while collision avoidance is provided by artificial potential fields. Extremum-seeking is model-free adaptive control method; it\u27s applicable in situations where there is a nonlinearity in the control problem and the nonlinearity has a local minimum or maximum. The extremum-seeking controller presented here is driven by antenna diversity and attempts to optimize the inputs to an unknown, time-varying cost function characterized by the RF environment. Each of the multiple antennas onboard the quadrotor receives the same incoming packets and provides associated signal strength measurements. The extremum-seeking controller then uses these measurements to autonomously fly the quadrotor communications relay to an optimal location so as to maximize throughput, all without positioning data. This work is motivated by the need to extend the operating ranges of robots in complex urban and indoor environments. The algorithm and necessary technical background are presented in detail. Simulations results verify the validity of the proposed extremum-seeking approach. Experiments demonstrate the feasability of implementing the extremum-seeking controller with tangible hardware

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance