완전 이식형 시각 보철 시스템을 위한 연구

학위논문(박사)--서울대학교 대학원 :공과대학 전기·정보공학부,2020. 2. 김성준.A visual prosthetic system typically consists of a neural stimulator, which is a surgically implantable device for electrical stimulation intended to restore the partial vision of blind patients, and peripheral external devices including an image sensor, a controller, and a processor. Although several visual prosthetic systems, such as retinal prostheses or retinal implants, have already been commercialized, there are still many issues on them (e.g., substrate materials for implantable units, electrode configurations, the use of external hardware, power supply and data transmission methods, design and fabrication approaches, etc.) to be dealt with for an improved visual prosthetic system. In this dissertation, a totally implantable visual prosthetic system is suggested with four motivations, which are thought to be important, as in the following: 1) simple fabrication of implantable parts, such as micro-sized electrodes and a case, for a neural stimulator based on polymer without semiconductor techniques, 2) multi-polar stimulation for virtual channel generation to overcome a limited number of physical electrodes in a confined space, 3) a new image acquisition strategy using an implantable camera, and 4) power supply as well as data transmission to a neural stimulator without hindering patients various activities. First, polymer materials have been widely used to develop various implantable devices for visual prosthetic systems because of their outstanding advantages including flexibility and applicability to microfabrication, compared with metal, silicon, or ceramic. Most polymer-based implantable devices have been fabricated by the semiconductor technology based on metal deposition and photolithography. This technology provides high accuracy and precision for metal patterning on a polymer substrate. However, the technology is also complicated and time-consuming as it requires masks for photolithography and vacuum for metal deposition as well as huge fabrication facilities. This is the reason why biocompatible cyclic olefin polymer (COP) with low water absorption (<0.01 %) and high light transmission (92 %) was chosen as a new substrate material of an implantable device in this study. Based on COP, simple fabrication process of an implantable device was developed without masks, vacuum, and huge fabrication facilities. COP is characterized by strong adhesion to gold and high ultraviolet (UV) transparency as well. Because of such adhesion and UV transparency, a gold thin film can be thermally laminated on a COP substrate with no adhesion layer and micromachined by a UV laser without damaging the substrate. Using the developed COP-based process, a depth-type microprobe was fabricated first, and its electrochemical and mechanical properties as well as functionality were evaluated by impedance measurements, buckling tests, and in vivo neural signal recording, respectively. Furthermore, the long-term reliability of COP encapsulation formed by the developed process was estimated through leakage current measurements during accelerated aging in saline solution, to show the feasibility of the encapsulation using COP as well. Second, even if stimulation electrodes become sufficiently small, it is demanding to arrange them for precise stimulation on individual neurons due to electrical crosstalk, which is the spatial superposition of electric fields generated by simultaneous stimuli. Hence, an adequate spacing between adjacent electrodes is required, and this causes a limited number of physical electrodes in a confined space such as in the brain or in the retina. To overcome this limitation, many researchers have proposed stimulation strategies using virtual channels, which are intermediate areas with large magnitudes of electric fields between physical electrodes. Such virtual channels can be created by multi-polar stimulation that can combine stimuli output from two or more electrodes at the same time. To produce more delicate stimulation patterns using virtual channels herein, penta-polar stimulation with a grid-shaped arrangement of electrodes was leveraged specially to generate them in two dimensions. This penta-polar stimulation was realized using a custom-designed integrated circuit with five different current sources and surface-type electrodes fabricated by the developed COP-based process. The effectiveness of the penta-polar stimulation was firstly evaluated by focusing electric fields in comparison to mono-polar stimulation. In addition, the distribution of electric fields changed by the penta-polar stimulation, which indicated virtual channel generation, was estimated in accordance with an amplitude ratio between stimuli of the two adjacent electrodes and a distance from them, through both finite element analysis and in vitro evaluation. Third, an implantable camera is herein proposed as a new image acquisition approach capturing real-time images while implanted in the eye, to construct a totally implantable visual prosthetic system. This implantable camera has distinct advantages in that it can provide blind patients with benefits to perform several ordinary activities, such as sleep, shower, or running, while focusing on objects in accordance with natural eye movements. These advantages are impossible to be achieved using a wearing unit such as a glasses-mounted camera used in a conventional partially implantable visual prosthetic system. Moreover, the implantable camera also has a merit of garnering a variety of image information using the complete structure of a camera, compared with a micro-photodiode array of a retinal implant. To fulfill these advantageous features, after having been coated with a biocompatible epoxy to prevent moisture penetration and sealed using a medical-grade silicone elastomer to gain biocompatibility as well as flexibility, the implantable camera was fabricated enough to be inserted into the eye. Its operation was assessed by wireless image acquisition that displayed a processed black and white image. In addition, to estimate reliable wireless communication ranges of the implantable camera in the body, signal-to-noise ratio measurements were conducted while it was covered by an 8-mm-thick biological medium that mimicked an in vivo environment. Lastly, external hardware attached on the body has been generally used in conventional visual prosthetic systems to stably deliver power and data to implanted units and to acquire image signals outside the body. However, there are common problems caused by this external hardware, including functional failure due to external damages, unavailability during sleep, in the shower, or while running or swimming, and cosmetic issues. Especially, an external coil for power and data transmission in a conventional visual prosthetic system is connected to a controller and processor through a wire, which makes the coil more vulnerable to the problems. To solve this issue, a totally implantable neural stimulation system controlled by a handheld remote controller is presented. This handheld remote controller can control a totally implantable stimulator powered by a rechargeable battery through low-power but relatively long-range ZigBee wireless communication. Moreover, two more functions can be performed by the handheld controller for expanded applications; one is percutaneous stimulation, and the other is inductive charging of the rechargeable battery. Additionally, simple switches on the handheld controller enable users to modulate parameters of stimuli like a gamepad. These handheld and user-friendly interfaces can make it easy to use the controller under various circumstances. The functionality of the controller was evaluated in vivo, through percutaneous stimulation and remote control especially for avian navigation, as well as in vitro. Results of both in vivo experiments were compared in order to verify the feasibility of remote control of neural stimulation using the controller. In conclusion, several discussions on results of this study, including the COP-based simple fabrication process, the penta-polar stimulation, the implantable camera, and the multi-functional handheld remote controller, are addressed. Based on these findings and discussions, how the researches in this thesis can be applied to the realization of a totally implantable visual prosthetic system is elucidated at the end of this dissertation.시각 보철 시스템은 일반적으로 실명 환자들의 부분 시력을 전기 자극으로 회복시키기 위하여 수술적으로 이식될 수 있는 장치인 신경 자극기와 이미지 센서 또는 컨트롤러, 프로세서를 포함하는 외부의 주변 장치들로 구성된다. 망막 보철 장치 또는 망막 임플란트와 같이 몇몇 시각 보철 시스템은 이미 상용화 되었지만, 여전히 더 나은 시각 보철 시스템을 위하여 다뤄져야 할 많은 이슈들 (예를 들어, 이식형 장치의 기판 물질, 전극의 배열, 외부 하드웨어의 사용, 전력 공급 및 데이터 전송 방법, 설계 및 제작 방식 등)이 있다. 본 학위논문은 완전 이식형 시각 보철 시스템을 제안하며, 이를 위하여 다음과 같이 중요하다고 생각되는 총 네 가지의 이슈들과 관련된 연구 내용을 다룬다. 1) 폴리머를 기반으로 한 신경 자극기의 미세 전극 및 패키지와 같은 이식 가능한 부분을 반도체 기술 없이 간단하게 제작하는 방법과 2) 제한된 공간에서 전극 개수의 물리적인 한계를 극복하기 위하여 가상 채널을 형성하는 다극성 자극 방식, 3) 이식형 카메라를 사용하는 새로운 이미지 획득 전략, 4) 환자의 다양한 활동을 방해하지 않으면서 신경 자극기에 전력을 공급하고 데이터를 전송하는 방법. 첫째로, 금속이나 실리콘, 세라믹에 비하여 폴리머는 유연성 및 미세 제작에의 적용 가능성을 포함하는 두드러진 이점들이 있기 때문에 시각 보철 시스템을 구성하는 다양한 이식 가능한 부분들에 널리 이용되었다. 대부분의 폴리머 기반 이식형 장치들은 금속 증착과 사진 식각을 기반으로 하는 반도체 공정으로 제작되었다. 이 공정은 폴리머 기판 위에 금속을 패터닝 하는 데에 있어서 높은 정확성과 정밀도를 제공한다. 하지만 그 공정은 또한, 사진 식각에 쓰이는 마스크와 금속 증착을 위한 진공뿐만 아니라 아주 큰 공정 설비를 요구하기 때문에 시간 소모가 심하고 복잡하다. 이는 본 연구에서 낮은 수분 흡수 (<0.01 %)와 높은 빛 투과 (92 %)를 특징으로 하는 생체적합한 고리형 올레핀 폴리머 (cyclic olefin polymer, COP)가 이식형 장치를 위한 새로운 기판 물질로써 선택된 이유이다. COP를 기반으로 하여, 마스크와 진공, 큰 공정 설비가 필요 없이 이식 가능한 장치를 간단하게 제작하는 공정이 개발되었다. COP는 금과의 강한 접합과 자외선에 대한 높은 투명성을 또 다른 특징으로 한다. 이와 같은 접합 특성과 자외선 투명성 덕분에, 금박은 COP 기판에 별도의 접합층 없이 열로 접합될 수 있을 뿐만 아니라 그 기판에 손상을 주지 않으면서 자외선 레이저를 통하여 미세하게 가공될 수 있다. 개발된 COP 기반의 공정을 처음으로 사용하여 침습형 미세 프로브가 제작되었고, 그 전기화학적, 기계적 특성과 기능성이 각각 임피던스 측정과 버클링 테스트, 생체 내 신경신호 기록으로 평가되었다. 그리고 COP를 사용한 밀봉의 가능성도 알아보기 위하여, 개발된 공정을 사용하여 형성된 COP 밀봉의 장기 안정성이 생리식염수에서의 가속 노화 중 누설 전류 측정을 통하여 추정되었다. 둘째로, 자극 전극의 크기가 충분히 작아진다고 하더라도, 동시에 출력되는 자극에 의해 형성되는 전기장의 중첩인 크로스 토크 때문에 개개의 신경세포를 정밀하게 자극하기 위하여 전극을 배열하는 것은 아주 어렵다. 따라서 인접한 전극 사이에 적당한 간격이 필요하게 되고, 이는 특히 뇌 또는 망막과 같은 제한된 공간에서 전극 개수의 물리적인 한계를 야기한다. 이 한계를 극복하기 위하여, 많은 연구자들은 실제 전극 사이에서 큰 전기장 세기를 갖는 중간 영역을 나타내는 가상 채널을 이용한 자극 전략을 제안하였다. 이러한 가상 채널은 둘 이상의 전극에서 동시에 출력되는 자극 파형을 합칠 수 있는 다극성 자극에 의하여 형성이 가능하다. 본 연구에서는 가상 채널을 이용하여 더 정교한 자극 패턴을 만들기 위하여, 특히 2차원에서의 가상 채널을 생성하고자 격자형 배열의 전극과 함께 5극성 자극이 사용되었다. 이 5극성 자극은 다섯 개의 서로 다른 전류원을 갖도록 맞춤 설계된 집적회로와 개발된 COP 기반 공정으로 제작된 평면형 전극을 사용하여 구현되었다. 먼저, 5극성 자극의 효과를 확인하고자 이 자극으로 전기장을 한 곳에 더 집중된 형태로 만들 수 있음이 단극성 자극과의 비교를 통하여 검증되었다. 그리고 유한 요소 분석과 생체 외 평가 둘 모두를 통하여, 5극성 자극으로 인한 가상 채널 형성을 뜻하는 전기장 분포가 인접한 두 전극에서 나오는 자극의 진폭비와 그 전극으로부터 떨어진 거리에 따라 변화됨이 추정되었다. 셋째로, 본 연구에서는 눈에 이식된 채로 실시간 이미지를 얻음으로써 완전 이식형 시각 보철 시스템을 구성하는 이식형 카메라를 새로운 이미지 획득 방식으로써 제안한다. 이 이식형 카메라는 실명 환자들이 자연스러운 눈의 움직임을 따라서 물체를 볼 수 있으며 잠이나 샤워, 달리기와 같은 일상적인 활동들을 방해 받지 않고 수행할 수 있도록 돕는다는 점에서 독특한 장점을 갖는다. 기존의 부분 이식형 시각 보철 시스템에서 쓰이는 안경 부착형 카메라와 같은 착용 장비로는 이러한 장점들을 얻을 수 없다. 게다가, 이식형 카메라는 망막 임플란트의 미세 포토다이오드 어레이와 달리 완전한 카메라 구조를 이용하여 다양한 이미지 정보를 획득할 수 있다는 장점을 갖는다. 이러한 이점들을 달성하기 위하여, 그 이식형 카메라는 수분 침투를 막고자 생체적합한 에폭시로 코팅되었고 생체적합성과 유연성을 얻기 위하여 의료용 실리콘 엘라스토머로 밀봉된 후에 눈에 충분히 삽입될 수 있는 형태 및 크기로 제작되었다. 이 장치의 동작은 흑백으로 처리된 이미지를 표시하는 무선 이미지 획득으로 시험되었다. 그리고 몸 안에서 이식형 카메라 갖는 안정적인 통신 거리를 측정하기 위하여, 장치가 생체 내 환경을 모사하기 위한 8 mm 두께의 생체 물질로 덮인 상태에서 그 장치의 신호 대 잡음비가 측정되었다. 마지막으로, 기존의 시각 보철 시스템에서 몸에 부착된 형태의 외부 하드웨어는 이식된 장치에 전력과 데이터를 안정적으로 전달하고 이미지 신호를 수집하기 위하여 일반적으로 사용되었다. 그럼에도 불구하고, 이러한 하드웨어는 외부로부터의 손상으로 인한 기능적인 결함과 수면 및 샤워, 달리기, 수영 활동 중 이용 불가능성, 외형적인 이슈 등을 포함하는 공통적인 문제들을 야기한다. 전력 및 데이터 전송을 위한 외부 코일은 시각 보철 시스템에서 컨트롤러와 프로세서에 유선으로 연결되고, 이러한 연결은 그 코일이 앞서 언급된 문제들에 특히 취약하게 만든다. 이러한 이슈를 해결하고자, 휴대용 무선 컨트롤러로 제어되는 완전 이식형 신경 자극 시스템이 제안된다. 이 휴대용 무선 컨트롤러는 저전력이지만 비교적 장거리 통신이 가능한 직비 (ZigBee) 무선 통신을 통하여 재충전 가능한 배터리로 동작하는 완전 이식형 자극기를 제어할 수 있다. 이 외에도, 이 휴대용 컨트롤러를 사용하면 폭넓은 응용을 위한 두 가지 기능을 추가로 수행할 수 있다. 하나는 유선 경피 자극이며, 다른 하나는 재충전 가능한 배터리의 유도 충전 기능이다. 또한, 이 휴대용 컨트롤러의 간단한 스위치를 사용하면 사용자는 게임패드와 같이 자극 파라미터를 쉽게 조절할 수 있다. 이러한 휴대 가능하고 사용자 친화적인 인터페이스를 통해 다양한 상황에서 그 컨트롤러를 쉽게 사용할 수 있다. 그 컨트롤러의 기능은 생체 외 평가뿐만 아니라 조류의 움직임 제어를 위한 유선 경피 자극 및 원격 제어를 통해 생체 내에서도 평가되었다. 또한, 그 컨트롤러를 사용한 원격 신경 자극 제어의 수행 가능성을 검증하기 위하여 두 생체 내 실험의 결과가 서로 비교되었다. 결론적으로, COP 기반의 간단한 제작 공정과 5극성 자극, 이식형 카메라, 휴대용 다기능 무선 컨트롤러를 포함하는 연구 결과에 대한 여러 논의가 이루어진다. 그리고 이러한 결과와 고찰에 기초하여, 본 학위논문의 연구가 완전 이식형 시각 보철 시스템의 구현에 어떻게 적용될 수 있는 지가 이 논문의 끝에서 상세히 설명된다.Abstract ------------------------------------------------------------------ i Contents ---------------------------------------------------------------- vi List of Figures ---------------------------------------------------------- xi List of Tables ----------------------------------------------------------- xx List of Abbreviations ------------------------------------------------ xxii Chapter 1. Introduction --------------------------------------------- 1 1.1. Visual Prosthetic System --------------------------------------- 2 1.1.1. Current Issues ------------------------------------------------- 2 1.1.1.1. Substrate Materials ---------------------------------------- 3 1.1.1.2. Electrode Configurations --------------------------------- 5 1.1.1.3. External Hardware ----------------------------------------- 6 1.1.1.4. Other Issues ------------------------------------------------- 7 1.2. Suggested Visual Prosthetic System ------------------------ 8 1.3. Four Motivations ---------------------------------------------- 10 1.4. Proposed Approaches ---------------------------------------- 11 1.4.1. Cyclic Olefin Polymer (COP) ------------------------------ 11 1.4.2. Penta-Polar Stimulation ----------------------------------- 13 1.4.3. Implantable Camera --------------------------------------- 16 1.4.4. Handheld Remote Controller ---------------------------- 18 1.5. Objectives of this Dissertation ------------------------------ 20 Chapter 2. Materials and Methods ----------------------------- 23 2.1. COP-Based Fabrication and Encapsulation -------------- 24 2.1.1. Overview ----------------------------------------------------- 24 2.1.2. Simple Fabrication Process ------------------------------- 24 2.1.3. Depth-Type Microprobe ---------------------------------- 26 2.1.3.1. Design ----------------------------------------------------- 26 2.1.3.2. Characterization ----------------------------------------- 27 2.1.3.3. In Vivo Neural Signal Recording ---------------------- 30 2.1.4. COP Encapsulation ---------------------------------------- 31 2.1.4.1. In Vitro Reliability Test ---------------------------------- 33 2.2. Penta-Polar Stimulation ------------------------------------- 34 2.2.1. Overview ---------------------------------------------------- 34 2.2.2. Design and Fabrication ----------------------------------- 35 2.2.2.1. Integrated Circuit (IC) Design ------------------------- 35 2.2.2.2. Surface-Type Electrode Fabrication ------------------ 38 2.2.3. Evaluations -------------------------------------------------- 39 2.2.3.1. Focused Electric Field Measurement ---------------- 42 2.2.3.2. Steered Electric Field Measurement ----------------- 42 2.3. Implantable Camera ----------------------------------------- 43 2.3.1. Overview ---------------------------------------------------- 43 2.3.2. Design and Fabrication ----------------------------------- 43 2.3.2.1. Circuit Design -------------------------------------------- 43 2.3.2.2. Wireless Communication Program ------------------ 46 2.3.2.3. Epoxy Coating and Elastomer Sealing -------------- 47 2.3.3. Evaluations ------------------------------------------------- 50 2.3.3.1. Wireless Image Acquisition --------------------------- 50 2.3.3.2. Signal-to-Noise Ratio (SNR) Measurement -------- 52 2.4. Multi-Functional Handheld Remote Controller --------- 53 2.4.1. Overview ---------------------------------------------------- 53 2.4.2. Design and Fabrication ----------------------------------- 53 2.4.2.1. Hardware Description ---------------------------------- 53 2.4.2.2. Software Description ----------------------------------- 57 2.4.3. Evaluations -------------------------------------------------- 57 2.4.3.1. In Vitro Evaluation -------------------------------------- 57 2.4.3.2. In Vivo Evaluation --------------------------------------- 59 Chapter 3. Results ------------------------------------------------- 61 3.1. COP-Based Fabrication and Encapsulation ------------- 62 3.1.1. Fabricated Depth-Type Microprobe ------------------- 62 3.1.1.1. Electrochemical Impedance -------------------------- 63 3.1.1.2. Mechanical Characteristics --------------------------- 64 3.1.1.3. In Vivo Neural Signal Recording --------------------- 66 3.1.2. COP Encapsulation --------------------------------------- 68 3.1.2.1. In Vitro Reliability Test --------------------------------- 68 3.2. Penta-Polar Stimulation ------------------------------------ 70 3.2.1. Fabricated IC and Surface-Type Electrodes ---------- 70 3.2.2. Evaluations ------------------------------------------------- 73 3.2.2.1. Focused Electric Field Measurement --------------- 73 3.2.2.2. Steered Electric Field Measurement ---------------- 75 3.3. Implantable Camera ---------------------------------------- 76 3.3.1. Fabricated Implantable Camera ----------------------- 76 3.3.2. Evaluations ------------------------------------------------ 77 3.3.2.1. Wireless Image Acquisition -------------------------- 77 3.3.2.2. SNR Measurement ------------------------------------ 78 3.4. Multi-Functional Handheld Remote Controller ------- 80 3.4.1. Fabricated Remote Controller ------------------------- 80 3.4.2. Evaluations ------------------------------------------------ 81 3.4.2.1. In Vitro Evaluation ------------------------------------ 81 3.4.2.2. In Vivo Evaluation ------------------------------------- 83 Chapter 4. Discussions ------------------------------------------ 86 4.1. COP-Based Fabrication and Encapsulation ------------ 87 4.1.1. Fabrication Process and Fabricated Devices -------- 87 4.1.2. Encapsulation and Optical Transparency ------------ 89 4.2. Penta-Polar Stimulation------------------------------------ 99 4.2.1. Designed IC and Electrode Configurations --------- 99 4.2.2. Virtual Channels in Two Dimensions ---------------- 101 4.3. Implantable Camera -------------------------------------- 102 4.3.1. Enhanced Reliability by Epoxy Coating ------------- 106 4.4. Multi-Functional Handheld Remote Controller ------ 107 4.4.1. Brief Discussions of the Two Extra Functions ------ 108 4.5. Totally Implantable Visual Prosthetic System --------- 113 Chapter 5. Conclusion ------------------------------------------ 117 References -------------------------------------------------------- 121 Supplements ------------------------------------------------------ 133 국문 초록 ----------------------------------------------------------- 143Docto

Wireless body sensor networks for health-monitoring applications

This is an author-created, un-copyedited version of an article accepted for publication in Physiological Measurement. The publisher is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01

Recent Advances in Neural Recording Microsystems

The accelerating pace of research in neuroscience has created a considerable demand for neural interfacing microsystems capable of monitoring the activity of large groups of neurons. These emerging tools have revealed a tremendous potential for the advancement of knowledge in brain research and for the development of useful clinical applications. They can extract the relevant control signals directly from the brain enabling individuals with severe disabilities to communicate their intentions to other devices, like computers or various prostheses. Such microsystems are self-contained devices composed of a neural probe attached with an integrated circuit for extracting neural signals from multiple channels, and transferring the data outside the body. The greatest challenge facing development of such emerging devices into viable clinical systems involves addressing their small form factor and low-power consumption constraints, while providing superior resolution. In this paper, we survey the recent progress in the design and the implementation of multi-channel neural recording Microsystems, with particular emphasis on the design of recording and telemetry electronics. An overview of the numerous neural signal modalities is given and the existing microsystem topologies are covered. We present energy-efficient sensory circuits to retrieve weak signals from neural probes and we compare them. We cover data management and smart power scheduling approaches, and we review advances in low-power telemetry. Finally, we conclude by summarizing the remaining challenges and by highlighting the emerging trends in the field

Neuromorphic hardware for somatosensory neuroprostheses

In individuals with sensory-motor impairments, missing limb functions can be restored using neuroprosthetic devices that directly interface with the nervous system. However, restoring the natural tactile experience through electrical neural stimulation requires complex encoding strategies. Indeed, they are presently limited in effectively conveying or restoring tactile sensations by bandwidth constraints. Neuromorphic technology, which mimics the natural behavior of neurons and synapses, holds promise for replicating the encoding of natural touch, potentially informing neurostimulation design. In this perspective, we propose that incorporating neuromorphic technologies into neuroprostheses could be an effective approach for developing more natural human-machine interfaces, potentially leading to advancements in device performance, acceptability, and embeddability. We also highlight ongoing challenges and the required actions to facilitate the future integration of these advanced technologies

Improving the mechanistic study of neuromuscular diseases through the development of a fully wireless and implantable recording device

Neuromuscular diseases manifest by a handful of known phenotypes affecting the peripheral nerves, skeletal muscle fibers, and neuromuscular junction. Common signs of these diseases include demyelination, myasthenia, atrophy, and aberrant muscle activity—all of which may be tracked over time using one or more electrophysiological markers. Mice, which are the predominant mammalian model for most human diseases, have been used to study congenital neuromuscular diseases for decades. However, our understanding of the mechanisms underlying these pathologies is still incomplete. This is in part due to the lack of instrumentation available to easily collect longitudinal, in vivo electrophysiological activity from mice. There remains a need for a fully wireless, batteryless, and implantable recording system that can be adapted for a variety of electrophysiological measurements and also enable long-term, continuous data collection in very small animals. To meet this need a miniature, chronically implantable device has been developed that is capable of wirelessly coupling energy from electromagnetic fields while implanted within a body. This device can both record and trigger bioelectric events and may be chronically implanted in rodents as small as mice. This grants investigators the ability to continuously observe electrophysiological changes corresponding to disease progression in a single, freely behaving, untethered animal. The fully wireless closed-loop system is an adaptable solution for a range of long-term mechanistic and diagnostic studies in rodent disease models. Its high level of functionality, adjustable parameters, accessible building blocks, reprogrammable firmware, and modular electrode interface offer flexibility that is distinctive among fully implantable recording or stimulating devices. The key significance of this work is that it has generated novel instrumentation in the form of a fully implantable bioelectric recording device having a much higher level of functionality than any other fully wireless system available for mouse work. This has incidentally led to contributions in the areas of wireless power transfer and neural interfaces for upper-limb prosthesis control. Herein the solution space for wireless power transfer is examined including a close inspection of far-field power transfer to implanted bioelectric sensors. Methods of design and characterization for the iterative development of the device are detailed. Furthermore, its performance and utility in remote bioelectric sensing applications is demonstrated with humans, rats, healthy mice, and mouse models for degenerative neuromuscular and motoneuron diseases

An efficient telemetry system for restoring sight

PhD ThesisThe human nervous system can be damaged as a result of disease or trauma, causing conditions such as Parkinson’s disease. Most people try pharmaceuticals as a primary method of treatment. However, drugs cannot restore some cases, such as visual disorder. Alternatively, this impairment can be treated with electronic neural prostheses. A retinal prosthesis is an example of that for restoring sight, but it is not efficient and only people with retinal pigmentosa benefit from it. In such treatments, stimulation of the nervous system can be achieved by electrical or optical means. In the latter case, the nerves need to be rendered light sensitive via genetic means (optogenetics). High radiance photonic devices are then required to deliver light to the target tissue. Such optical approaches hold the potential to be more effective while causing less harm to the brain tissue. As these devices are implanted in tissue, wireless means need to be used to communicate with them. For this, IEEE 802.15.6 or Bluetooth protocols at 2.4GHz are potentially compatible with most advanced electronic devices, and are also safe and secure. Also, wireless power delivery can operate the implanted device. In this thesis, a fully wireless and efficient visual cortical stimulator was designed to restore the sight of the blind. This system is likely to address 40% of the causes of blindness. In general, the system can be divided into two parts, hardware and software. Hardware parts include a wireless power transfer design, the communication device, power management, a processor and the control unit, and the 3D design for assembly. The software part contains the image simplification, image compression, data encoding, pulse modulation, and the control system. Real-time video streaming is processed and sent over Bluetooth, and data are received by the LPC4330 six layer implanted board. After retrieving the compressed data, the processed data are again sent to the implanted electrode/optrode to stimulate the brain’s nerve cells

Advances in Microelectronics for Implantable Medical Devices

Implantable medical devices provide therapy to treat numerous health conditions as well as monitoring and diagnosis. Over the years, the development of these devices has seen remarkable progress thanks to tremendous advances in microelectronics, electrode technology, packaging and signal processing techniques. Many of today’s implantable devices use wireless technology to supply power and provide communication. There are many challenges when creating an implantable device. Issues such as reliable and fast bidirectional data communication, efficient power delivery to the implantable circuits, low noise and low power for the recording part of the system, and delivery of safe stimulation to avoid tissue and electrode damage are some of the challenges faced by the microelectronics circuit designer. This paper provides a review of advances in microelectronics over the last decade or so for implantable medical devices and systems. The focus is on neural recording and stimulation circuits suitable for fabrication in modern silicon process technologies and biotelemetry methods for power and data transfer, with particular emphasis on methods employing radio frequency inductive coupling. The paper concludes by highlighting some of the issues that will drive future research in the field

Design of Wireless Power Transfer and Data Telemetry System for Biomedical Applications

With the advancement of biomedical instrumentation technologies sensor based remote healthcare monitoring system is gaining more attention day by day. In this system wearable and implantable sensors are placed outside or inside of the human body. Certain sensors are needed to be placed inside the human body to acquire the information on the vital physiological phenomena such as glucose, lactate, pH, oxygen, etc. These implantable sensors have associated circuits for sensor signal processing and data transmission. Powering the circuit is always a crucial design issue. Batteries cannot be used in implantable sensors which can come in contact with the blood resulting in serious health risks. An alternate approach is to supply power wirelessly for tether-less and battery- less operation of the circuits.Inductive power transfer is the most common method of wireless power transfer to the implantable sensors. For good inductive coupling, the inductors should have high inductance and high quality factor. But the physical dimensions of the implanted inductors cannot be large due to a number of biomedical constraints. Therefore, there is a need for small sized and high inductance, high quality factor inductors for implantable sensor applications. In this work, design of a multi-spiral solenoidal printed circuit board (PCB) inductor for biomedical application is presented. The targeted frequency for power transfer is 13.56 MHz which is within the license-free industrial, scientific and medical (ISM) band. A figure of merit based optimization technique has been utilized to optimize the PCB inductors. Similar principal is applied to design on-chip inductor which could be a potential solution for further miniaturization of the implantable system. For layered human tissue the optimum frequency of power transfer is 1 GHz for smaller coil size. For this reason, design and optimization of multi-spiral solenoidal integrated inductors for 1 GHz frequency is proposed. Finally, it is demonstrated that the proposed inductors exhibit a better overall performance in comparison with the conventional inductors for biomedical applications