Robust adaptive controller for wheel mobile robot with disturbances and wheel slips

In this paper an observer based adaptive control algorithm is built for wheel mobile robot (WMR) with considering the system uncertainties, input disturbances, and wheel slips. Firstly, the model of the kinematic and dynamic loops is shown with presence of the disturbances and system uncertainties. Next, the adaptive controller for nonlinear mismatched disturbance systems based on the disturbances observer is presented in detail. The controller includes two parts, the first one is for the stability purpose and the later is for the disturbances compensation. After that this control scheme is applied for both two loops of the system. In this paper, the stability of the closed system which consists of two control loops and the convergence of the observers is mathematically analysed based on the Lyapunov theory. Moreover, the proposed model does not require the complex calculation so it is easy for the implementation. Finally, the simulation model is built for presented method and the existed one to verify the correctness and the effectiveness of the proposed scheme. The simulation results show that the introduced controller gives the good performances even that the desired trajectory is complicated and the working condition is hard

Trajectory Tracking Control of Skid-Steering Mobile Robots with Slip and Skid Compensation using Sliding-Mode Control and Deep Learning

Slip and skid compensation is crucial for mobile robots' navigation in outdoor environments and uneven terrains. In addition to the general slipping and skidding hazards for mobile robots in outdoor environments, slip and skid cause uncertainty for the trajectory tracking system and put the validity of stability analysis at risk. Despite research in this field, having a real-world feasible online slip and skid compensation is still challenging due to the complexity of wheel-terrain interaction in outdoor environments. This paper presents a novel trajectory tracking technique with real-world feasible online slip and skid compensation at the vehicle-level for skid-steering mobile robots in outdoor environments. The sliding mode control technique is utilized to design a robust trajectory tracking system to be able to consider the parameter uncertainty of this type of robot. Two previously developed deep learning models [1], [2] are integrated into the control feedback loop to estimate the robot's slipping and undesired skidding and feed the compensator in a real-time manner. The main advantages of the proposed technique are (1) considering two slip-related parameters rather than the conventional three slip parameters at the wheel-level, and (2) having an online real-world feasible slip and skid compensator to be able to reduce the tracking errors in unforeseen environments. The experimental results show that the proposed controller with the slip and skid compensator improves the performance of the trajectory tracking system by more than 27%

Adaptive sliding mode control for uncertain wheel mobile robot

In this paper a simple adaptive sliding mode controller is proposed for tracking control of the wheel mobile robot (WMR) systems. The WMR are complicated systems with kinematic and dynamic model so the error dynamic model is built to simplify the mathematical model. The sliding mode control then is designed for this error model with the adaptive law to compensate for the mismatched. The proposed control scheme in this work contains only one control loop so it is simple in both implementation and mathematical calculation. Moreover, the requirement of upper bounds of disturbance that is popular in the sliding mode control is cancelled, so it is convenient for real world applications. Finally, the effectiveness of the presented algorithm is verified through mathematical proof and simulations. The comparison with the existing work is also executed to evaluate the correction of the introduced adaptive sliding mode controller. Thoroughly, the settling time, the peak value, the integral square error of the proposed control scheme reduced about 50% in comparison with the compared disturbance observer based sliding mode control

Virtual Structure Based Formation Tracking of Multiple Wheeled Mobile Robots: An Optimization Perspective

Today, with the increasing development of science and technology, many systems need to be optimized to find the optimal solution of the system. this kind of problem is also called optimization problem. Especially in the formation problem of multi-wheeled mobile robots, the optimization algorithm can help us to find the optimal solution of the formation problem. In this paper, the formation problem of multi-wheeled mobile robots is studied from the point of view of optimization. In order to reduce the complexity of the formation problem, we first put the robots with the same requirements into a group. Then, by using the virtual structure method, the formation problem is reduced to a virtual WMR trajectory tracking problem with placeholders, which describes the expected position of each WMR formation. By using placeholders, you can get the desired track for each WMR. In addition, in order to avoid the collision between multiple WMR in the group, we add an attraction to the trajectory tracking method. Because MWMR in the same team have different attractions, collisions can be easily avoided. Through simulation analysis, it is proved that the optimization model is reasonable and correct. In the last part, the limitations of this model and corresponding suggestions are given

Disturbance Rejection Control for Autonomous Trolley Collection Robots with Prescribed Performance

Trajectory tracking control of autonomous trolley collection robots (ATCR) is an ambitious work due to the complex environment, serious noise and external disturbances. This work investigates a control scheme for ATCR subjecting to severe environmental interference. A kinematics model based adaptive sliding mode disturbance observer with fast convergence is first proposed to estimate the lumped disturbances. On this basis, a robust controller with prescribed performance is proposed using a backstepping technique, which improves the transient performance and guarantees fast convergence. Simulation outcomes have been provided to illustrate the effectiveness of the proposed control scheme

Optimizing the performance of a wheeled mobile robots for use in agriculture using a linear-quadratic regulator

Use of wheeled mobile robot systems could be crucial in addressing some of the future issues facing agriculture. However, robot systems on wheels are currently unstable and require a control mechanism to increase stability, resulting in much research requirement to develop an appropriate controller algorithm for wheeled mobile robot systems. Proportional, integral, derivative (PID) controllers are currently widely used for this purpose, but the PID approach is frequently inappropriate due to disruptions or fluctuations in parameters. Other control approaches, such as linear-quadratic regulator (LQR) control, can be used to address some of the issues associated with PID controllers. In this study, a kinematic model of a four-wheel skid-steering mobile robot was developed to test the functionality of LQR control. Three scenarios (control cheap, non -zero state expensive; control expensive, non -zero state cheap; only non -zero state expensive) were examined using the characteristics of the wheeled mobile robot. Peak time, settling time, and rising time for cheap control based on these scenarios was found to be 0.1 s, 7.82 s, and 4.39 s, respectively

Speed control of wheeled mobile robot by nature-inspired social spider algorithm-based PID controller

: Mobile robot is an automatic vehicle with wheels that can be moved automatically from one place to another. A motor is built on its wheels for mobility purposes, which is controlled using a controller. DC motor speed is controlled by the proportional integral derivative (PID) controller. Kinematic modeling is used in our work to understand the mechanical behavior of robots for designing the appropriate mobile robots. Right and left wheel velocity and direction are calculated by using the kinematic modeling, and the kinematic modeling is given to the PID controller to gain the output. Motor speed is controlled by the PID low-level controller for the robot mobility; the speed controlling is done using the constant values Kd, Kp, and Ki which depend on the past, future, and present errors. For better control performance, the integral gain, differential gain, and proportional gain are adjusted by the PID controller. Robot speed may vary by changing the direction of the vehicle, so to avoid this the Social Spider Optimization (SSO) algorithm is used in PID controllers. PID controller parameter tuning is hard by using separate algorithms, so the parameters are tuned by the SSO algorithm which is a novel nature-inspired algorithm. The main goal of this paper is to demonstrate the effectiveness of the proposed approach in achieving precise speed control of the robot, particularly in the presence of disturbances and uncertainties

Adaptive and learning-based formation control of swarm robots

Autonomous aerial and wheeled mobile robots play a major role in tasks such as search and rescue, transportation, monitoring, and inspection. However, these operations are faced with a few open challenges including robust autonomy, and adaptive coordination based on the environment and operating conditions, particularly in swarm robots with limited communication and perception capabilities. Furthermore, the computational complexity increases exponentially with the number of robots in the swarm. This thesis examines two different aspects of the formation control problem. On the one hand, we investigate how formation could be performed by swarm robots with limited communication and perception (e.g., Crazyflie nano quadrotor). On the other hand, we explore human-swarm interaction (HSI) and different shared-control mechanisms between human and swarm robots (e.g., BristleBot) for artistic creation. In particular, we combine bio-inspired (i.e., flocking, foraging) techniques with learning-based control strategies (using artificial neural networks) for adaptive control of multi- robots. We first review how learning-based control and networked dynamical systems can be used to assign distributed and decentralized policies to individual robots such that the desired formation emerges from their collective behavior. We proceed by presenting a novel flocking control for UAV swarm using deep reinforcement learning. We formulate the flocking formation problem as a partially observable Markov decision process (POMDP), and consider a leader-follower configuration, where consensus among all UAVs is used to train a shared control policy, and each UAV performs actions based on the local information it collects. In addition, to avoid collision among UAVs and guarantee flocking and navigation, a reward function is added with the global flocking maintenance, mutual reward, and a collision penalty. We adapt deep deterministic policy gradient (DDPG) with centralized training and decentralized execution to obtain the flocking control policy using actor-critic networks and a global state space matrix. In the context of swarm robotics in arts, we investigate how the formation paradigm can serve as an interaction modality for artists to aesthetically utilize swarms. In particular, we explore particle swarm optimization (PSO) and random walk to control the communication between a team of robots with swarming behavior for musical creation

Saturated Output-Feedback Hybrid Reinforcement Learning Controller for Submersible Vehicles Guaranteeing Output Constraints

In this brief, we propose a new neuro-fuzzy reinforcement learning-based control (NFRLC) structure that allows autonomous underwater vehicles (AUVs) to follow a desired trajectory in large-scale complex environments precisely. The accurate tracking control problem is solved by a unique online NFRLC method designed based on actor-critic (AC) structure. Integrating the NFRLC framework including an adaptive multilayer neural network (MNN) and interval type-2 fuzzy neural network (IT2FNN) with a high-gain observer (HGO), a robust smart observer-based system is set up to estimate the velocities of the AUVs, unknown dynamic parameters containing unmodeled dynamics, nonlinearities, uncertainties and external disturbances. By employing a saturation function in the design procedure and transforming the input limitations into input saturation nonlinearities, the risk of the actuator saturation is effectively reduced together with nonlinear input saturation compensation by the NFRLC strategy. A predefined funnel-shaped performance function is designed to attain certain prescribed output performance. Finally, stability study reveals that the entire closed-loop system signals are semi-globally uniformly ultimately bounded (SGUUB) and can provide prescribed convergence rate for the tracking errors so that the tracking errors approach to the origin evolving inside the funnel-shaped performance bound at the prescribed time