Modeling and Control of Flexible Link Manipulators

Autonomous maritime navigation and offshore operations have gained wide attention with the aim of reducing operational costs and increasing reliability and safety. Offshore operations, such as wind farm inspection, sea farm cleaning, and ship mooring, could be carried out autonomously or semi-autonomously by mounting one or more long-reach robots on the ship/vessel. In addition to offshore applications, long-reach manipulators can be used in many other engineering applications such as construction automation, aerospace industry, and space research. Some applications require the design of long and slender mechanical structures, which possess some degrees of flexibility and deflections because of the material used and the length of the links. The link elasticity causes deflection leading to problems in precise position control of the end-effector. So, it is necessary to compensate for the deflection of the long-reach arm to fully utilize the long-reach lightweight flexible manipulators. This thesis aims at presenting a unified understanding of modeling, control, and application of long-reach flexible manipulators. State-of-the-art dynamic modeling techniques and control schemes of the flexible link manipulators (FLMs) are discussed along with their merits, limitations, and challenges. The kinematics and dynamics of a planar multi-link flexible manipulator are presented. The effects of robot configuration and payload on the mode shapes and eigenfrequencies of the flexible links are discussed. A method to estimate and compensate for the static deflection of the multi-link flexible manipulators under gravity is proposed and experimentally validated. The redundant degree of freedom of the planar multi-link flexible manipulator is exploited to minimize vibrations. The application of a long-reach arm in autonomous mooring operation based on sensor fusion using camera and light detection and ranging (LiDAR) data is proposed.publishedVersio

Performance Investigations of an Improved Backstepping Operational space Position Tracking Control of a Mobile Manipulator

This article implies an improved backstepping control technique for the operational-space position tracking of a kinematically redundant mobile manipulator. The mobile manipulator thought-out for the analysis has a vehicle base with four mecanum wheels and a serial manipulator arm with three rotary actuated joints. The recommended motion controller provides a safeguard against the system dynamic variations owing to the parameter uncertainties, unmodelled system dynamics and unknown exterior disturbances. The Lyapunov’s direct method assists in designing and authenticating the system’s closed-loop stability and tracking ability of the suggested control strategy. The feasibility, effectiveness and robustness of the recommended controller are demonstrated and investigated numerically with the help of computer based simulations. The mathematical model used for the computer-based simulations is derived based on a real-time mobile manipulator and the derived model is further verified with an inbuilt gazebo model in a robot operating system (ROS) environment. In addition, the proposed scheme is verified on an in-house fabricated mobile manipulator system. Further, the recommended controller performance is correlated with the conventional backstepping control design in both computer-based simulations and in real-time experiments

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Control strategies for robotic manipulators

This survey is aimed at presenting the major robust control strategies for rigid robot manipulators. The techniques discussed are feedback linearization/Computed torque control, Variable structure compensator, Passivity based approach and Disturbance observer based control. The first one is based on complete dynamic model of a robot. It results in simple linear control which offers guaranteed stability. Variable structure compensator uses a switching/relay action to overcome dynamic uncertainties and disturbances. Passivity based controller make use of passive structure of a robot. If passivity of a feedback system is proved, nonlinearities and uncertainties will not affect the stability. Disturbance observer based controllers estimate disturbances, which can be cancelled out to achieve a nominal model, for which a simple controller can then be designed. This paper, after explaining each control strategy in detail, finally compares these strategies for their pros and cons. Possible solutions to cope with the drawbacks have also been presented in tabular form. © 2012 IEEE

Development of Motion Control Systems for Hydraulically Actuated Cranes with Hanging Loads

Automation has been used in industrial processes for several decades to increase efficiency and safety. Tasks that are either dull, dangerous, or dirty can often be performed by machines in a reliable manner. This may provide a reduced risk to human life, and will typically give a lower economic cost. Industrial robots are a prime example of this, and have seen extensive use in the automotive industry and manufacturing plants. While these machines have been employed in a wide variety of industries, heavy duty lifting and handling equipment such as hydraulic cranes have typically been manually operated. This provides an opportunity to investigate and develop control systems to push lifting equipment towards the same level of automation found in the aforementioned industries. The use of winches and hanging loads on cranes give a set of challenges not typically found on robots, which requires careful consideration of both the safety aspect and precision of the pendulum-like motion. Another difference from industrial robots is the type of actuation systems used. While robots use electric motors, the cranes discussed in this thesis use hydraulic cylinders. As such, the dynamics of the machines and the control system designmay differ significantly. In addition, hydraulic cranes may experience significant deflection when lifting heavy loads, arising from both structural flexibility and the compressibility of the hydraulic fluid. The work presented in this thesis focuses on motion control of hydraulically actuated cranes. Motion control is an important topic when developing automation systems, as moving from one position to another is a common requirement for automated lifting operations. A novel path controller operating in actuator space is developed, which takes advantage of the load-independent flow control valves typically found on hydraulically actuated cranes. By operating in actuator space the motion of each cylinder is inherently minimized. To counteract the pendulum-like motion of the hanging payload, a novel anti-swing controller is developed and experimentally verified. The anti-swing controller is able to suppress the motion from the hanging load to increase safety and precision. To tackle the challenges associated with the flexibility of the crane, a deflection compensator is developed and experimentally verified. The deflection compensator is able to counteract both the static deflection due to gravity and dynamic de ection due to motion. Further, the topic of adaptive feedforward control of pressure compensated cylinders has been investigated. A novel adaptive differential controller has been developed and experimentally verified, which adapts to system uncertainties in both directions of motion. Finally, the use of electro-hydrostatic actuators for motion control of cranes has been investigated using numerical time domain simulations. A novel concept is proposed and investigated using simulations.publishedVersio

Task-space dynamic control of underwater robots

This thesis is concerned with the control aspects for underwater tasks performed by marine robots. The mathematical models of an underwater vehicle and an underwater vehicle with an onboard manipulator are discussed together with their associated properties. The task-space regulation problem for an underwater vehicle is addressed where the desired target is commonly specified as a point. A new control technique is proposed where the multiple targets are defined as sub-regions. A fuzzy technique is used to handle these multiple sub-region criteria effectively. Due to the unknown gravitational and buoyancy forces, an adaptive term is adopted in the proposed controller. An extension to a region boundary-based control law is then proposed for an underwater vehicle to illustrate the flexibility of the region reaching concept. In this novel controller, a desired target is defined as a boundary instead of a point or region. For a mapping of the uncertain restoring forces, a least-squares estimation algorithm and the inverse Jacobian matrix are utilised in the adaptive control law. To realise a new tracking control concept for a kinematically redundant robot, subregion tracking control schemes with a sub-tasks objective are developed for a UVMS. In this concept, the desired objective is specified as a moving sub-region instead of a trajectory. In addition, due to the system being kinematically redundant, the controller also enables the use of self-motion of the system to perform sub-tasks (drag minimisation, obstacle avoidance, manipulability and avoidance of mechanical joint limits)

Hierarchical Adaptive Control of Modular and Reconfigurable Robot Manipulator Platforms

Within the rapidly growing interest in today's robotics industry, modular and reconfigurable robots (MRRs) are among the most auspicious systems to expand the adaptability of robotic applications. They are adaptable to multiple industrial field applications but they also have additional advantages such as versatile hardware, easier maintenance, and transportability. However, such features render the controller design that manages a variety of robot configurations with reliable performance more complex since their system dynamics involve not only nonlinearities and uncertainties but also changing dynamics parameters after the reconfiguration. In this thesis, the motion control problem of MRR manipulators is addressed and hierarchical adaptive control architecture is developed for MRRs. This hierarchical structure allows the adjustment of the nominal parameters of an MRR system for system parameter identification and control design purposes after the robot is reconfigured. This architecture simplifies the design of adaptive control for MRRs which is effective in the presence of dynamic parameter uncertainty, unmodeled dynamics, and disturbance. The proposed architecture provides flexibility in choosing adaptive algorithms applicable to MRRs. The developed architecture consists of high-level and low-level modules. The high-level module handles the dynamic parameters changes and reconstructs the parametric model used for on-line parameter identification after the modules are reassembled. The low-level structure consists of an adaptive algorithm updated by an on-line parameter estimation to handle the dynamic parameter uncertainties. Furthermore, a robust adaptive term is added into this low-level controller to compensate for the unmodeled dynamics and disturbances. The proposed adaptive control algorithms guarantee uniformly ultimate boundedness (UUB) of the MRR trajectories in terms of robust stability despite the dynamic parameter uncertainty, unmodeled dynamics, changes in the system dynamics, and disturbance