Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles

With the increasing demand for unmanned aerial vehicles (UAVs) in both military and civilian applications, critical safety issues need to be specially considered in order to make better and wider use of them. UAVs are usually employed to work in hazardous and complex environments, which may seriously threaten the safety and reliability of UAVs. Therefore, the safety and reliability of UAVs are becoming imperative for development of advanced intelligent control systems. The key challenge now is the lack of fully autonomous and reliable control techniques in face of different operation conditions and sophisticated environments. Further development of unmanned aerial vehicle (UAV) control systems is required to be reliable in the presence of system component faults and to be insensitive to model uncertainties and external environmental disturbances. This thesis research aims to design and develop novel control schemes for UAVs with consideration of all the factors that may threaten their safety and reliability. A novel adaptive sliding mode control (SMC) strategy is proposed to accommodate model uncertainties and actuator faults for an unmanned quadrotor helicopter. Compared with the existing adaptive SMC strategies in the literature, the proposed adaptive scheme can tolerate larger actuator faults without stimulating control chattering due to the use of adaptation parameters in both continuous and discontinuous control parts. Furthermore, a fuzzy logic-based boundary layer and a nonlinear disturbance observer are synthesized to further improve the capability of the designed control scheme for tolerating model uncertainties, actuator faults, and unknown external disturbances while preventing overestimation of the adaptive control parameters and suppressing the control chattering effect. Then, a cost-effective fault estimation scheme with a parallel bank of recurrent neural networks (RNNs) is proposed to accurately estimate actuator fault magnitude and an active fault-tolerant control (FTC) framework is established for a closed-loop quadrotor helicopter system. Finally, a reconfigurable control allocation approach is combined with adaptive SMC to achieve the capability of tolerating complete actuator failures with application to a modified octorotor helicopter. The significance of this proposed control scheme is that the stability of the closed-loop system is theoretically guaranteed in the presence of both single and simultaneous actuator faults

Nonlinear robust control of tail-sitter aircrafts in flight mode transitions

© 2018 Elsevier Masson SAS In this paper, a nonlinear robust controller is proposed to deal with the flight mode transition control problem of tail-sitter aircrafts. During the mode transitions, the control problem is challenging due to the high nonlinearities and strong couplings. The tail-sitter aircraft model can be considered as a nominal part with uncertainties including nonlinear terms, parametric uncertainties, and external disturbances. The proposed controller consists of a nominal H∞controller and a nonlinear disturbance observer. The nominal H∞controller based on the nominal model is designed to achieve the desired trajectory tracking performance. The uncertainties are regarded as equivalent disturbances to restrain their influences by the nonlinear disturbance observer. Theoretical analysis and simulation results are given to show advantages of the proposed control method, compared with the standard H∞control approach

Application of sliding mode control with extended high gain observer to stabilize the underactuated quadrotor system

This work proposes an output feedback controller for stabilization of the quadrotor underactuated system in the presence of time varying disturbances and model uncertainties. The proposed control is an improvement to the sliding mode control (SMC). An extended high-gain observer (EHGO) when combined with sliding mode control (SMC) able to give feasible performance beyond the performance of the standard sliding mode. It is able to bring the state trajectories of the closed-loop system close to the target system with a smaller ultimate bound of error and smaller control magnitude. The proposed method is illustrated by simulation

Nonlinear control and perturbation compensation in UAV quadrotor

The great interest in the field of flying robotics encouraged a lot of research work to improve its control strategies. This thesis is about modelling and design of controllers and perturbation compensators for a UAV quadrotor. Four approaches are built in this purpose. The first approach is perturbation attenuation system in a UAV quadrotor. Hierarchical Perturbation Compensator (HPC) is built to compensate for system uncertainties, non-modelled dynamics and external disturbances. It comprises three subsystems designed to provide continuous and precise estimation of perturbation. Each subsystem is designed to avoid the drawbacks of the other. This approach has superior proficiency to decrease unknown perturbation either external or internal. The second approach is a Three Loop Uncertainties Compensator (TLUC), designed to estimate unknown time- varying uncertainties and perturbations to reduce their effects and in order to preserve stability. The novelty of this approach is that the TLUC can estimate and compensate for uncertainties and disturbances in three loops made to provide tracking to residual uncertainty in order to achieve a higher level of support to the controller. Exponential reaching law sliding mode controller is proposed and applied. It is integrated based on Lyapunov stability theory to obtain fast response with lowest possible chattering. The performance is verified through analyses, simulations and experiments. The third approach is Feedback Linearization based on Sliding Mode Control (FLSMC). The purpose is to provide nonlinear control that reduces the effect of the highly coupled dynamic behavior and the hard nonlinearity in the quadrotor. The proposed controller uses a Second Order sliding mode Exact Differentiator SOED to estimate the velocity and the acceleration. The fourth approach proposes an improved Non-Singular Terminal Super-Twisting Control for the problem of position and attitude tracking of quadrotor systems. The super-twisting algorithm is an effective control used to provide high precision and less chattering. The proposed method is based on a non-singular terminal sliding surface with new exponent that solves the problem of singularity in terminal sliding mode control. Design procedure and the stability analysis using Lyapunov theory are detailed for the considered approaches. The performance is verified through analyses, simulations and experiments

An Adaptive Fault-Tolerant Sliding Mode Control Allocation Scheme for Multirotor Helicopter Subject to Simultaneous Actuator Faults

This paper proposes a novel adaptive sliding mode based control allocation scheme for accommodating simultaneous actuator faults. The proposed control scheme includes two separate control modules with virtual control part and control allocation part, respectively. As a lowlevel control module, the control allocation/re-allocation scheme is used to distribute/redistribute virtual control signals among the available actuators under fault-free or faulty cases, respectively. In the case of simultaneous actuator faults, the control allocation and re-allocation module may fail to meet the required virtual control signal which will degrade the overall system stability. The proposed online adaptive scheme can seamlessly adjust the control gains for the high-level sliding mode control module and reconfigure the distribution of control signals to eliminate the effect of the virtual control error and maintain stability of the closed-loop system. In addition, with the help of the boundary layer for constructing the adaptation law, the overestimation of control gains is avoided, and the adaptation ceases once the sliding variable is within the boundary layer. A significant feature of this study is that the stability of the closed-loop system is guaranteed theoretically in the presence of simultaneous actuator faults. The effectiveness of the proposed control scheme is demonstrated by experimental results based on a modified unmanned multirotor helicopter under both single and simultaneous actuator faults conditions with comparison to a conventional sliding mode controller and a linear quadratic regulator scheme

Integrated fault-tolerant control for a 3-DOF helicopter with actuator faults and saturation

© The Institution of Engineering and Technology 2017. This study proposes a fault estimation (FE)-based fault-tolerant control (FTC) strategy to maintain system reliability and achieve desirable control performance for a 3-DOF helicopter system with both actuator drift and oscillation faults and saturation. The effects of the faults and saturation are combined into a composite non-differentiable actuator fault function, which is approximated by a differentiable function and estimated together with the system state using a non-linear unknown input observer. An adaptive sliding mode controller based on the estimates is developed to compensate the effects of the faults and saturation. Taking into account the bi-directional robustness interactions between the FE and FTC functions, an integrated design approach is proposed to obtain the observer and controller gains in a single step, so as to achieve robust overall FTC system performance. In fault-free cases, the proposed strategy can be considered as a new approach for anti-windup control to compensate the effect of input saturation. Comparative simulations are provided to verify the effectiveness of the proposed design under different actuator fault scenarios

Optimized state feedback regulation of 3DOF helicopter system via extremum seeking

In this paper, an optimized state feedback regulation of a 3 degree of freedom (DOF) helicopter is designed via extremum seeking (ES) technique. Multi-parameter ES is applied to optimize the tracking performance via tuning State Vector Feedback with Integration of the Control Error (SVFBICE). Discrete multivariable version of ES is developed to minimize a cost function that measures the performance of the controller. The cost function is a function of the error between the actual and desired axis positions. The controller parameters are updated online as the optimization takes place. This method significantly decreases the time in obtaining optimal controller parameters. Simulations were conducted for the online optimization under both fixed and varying operating conditions. The results demonstrate the usefulness of using ES for preserving the maximum attainable performance

Automatic Flight Control Systems

The history of flight control is inseparably linked to the history of aviation itself. Since the early days, the concept of automatic flight control systems has evolved from mechanical control systems to highly advanced automatic fly-by-wire flight control systems which can be found nowadays in military jets and civil airliners. Even today, many research efforts are made for the further development of these flight control systems in various aspects. Recent new developments in this field focus on a wealth of different aspects. This book focuses on a selection of key research areas, such as inertial navigation, control of unmanned aircraft and helicopters, trajectory control of an unmanned space re-entry vehicle, aeroservoelastic control, adaptive flight control, and fault tolerant flight control. This book consists of two major sections. The first section focuses on a literature review and some recent theoretical developments in flight control systems. The second section discusses some concepts of adaptive and fault-tolerant flight control systems. Each technique discussed in this book is illustrated by a relevant example

Discrete-time integral MRAC with minimal controller synthesis and parameter projection

Model reference adaptive controllers with Minimal Control Synthesis are effective control algorithms to guarantee asymptotic convergence of the tracking error to zero not only for disturbance-free uncertain linear systems, but also for highly nonlinear plants with unknown parameters, unmodeled dynamics and subject to perturbations. However, an apparent drift in adaptive gains may occasionally arise, which can eventually lead to closed-loop instability. In this paper, we address this key issue for discrete-time systems under L-2 disturbances using a parameter projection algorithm. A consistent proof of stability of all the closed-loop signals is provided, while tracking error is shown to asymptotically converge to zero. We also show the applicability of the adaptive algorithm for digitally controlled continuous-time plants. The proposed algorithm is numerically validated taking into account a discrete-time LTI system subject to parameter uncertainty, parameter variations and L-2 disturbances. Finally, as a possible engineering application of this novel adaptive strategy, the control of a highly nonlinear electromechanical actuator is considered. (C) 2015 The Franldin Institute. Published by Elsevier Ltd. All rights reserved.Postprint (author's final draft