Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.Siirretty Doriast

Software-based and regionally-oriented traffic management in Networks-on-Chip

Since the introduction of chip-multiprocessor systems, the number of integrated cores has been steady growing and workload applications have been adapted to exploit the increasing parallelism. This changed the importance of efficient on-chip communication significantly and the infrastructure has to keep step with these new requirements. The work at hand makes significant contributions to the state-of-the-art of the latest generation of such solutions, called Networks-on-Chip, to improve the performance, reliability, and flexible management of these on-chip infrastructures

Design and performance optimization of asynchronous networks-on-chip

As digital systems continue to grow in complexity, the design of conventional synchronous systems is facing unprecedented challenges. The number of transistors on individual chips is already in the multi-billion range, and a greatly increasing number of components are being integrated onto a single chip. As a consequence, modern digital designs are under strong time-to-market pressure, and there is a critical need for composable design approaches for large complex systems. In the past two decades, networks-on-chip (NoC’s) have been a highly active research area. In a NoC-based system, functional blocks are first designed individually and may run at different clock rates. These modules are then connected through a structured network for on-chip global communication. However, due to the rigidity of centrally-clocked NoC’s, there have been bottlenecks of system scalability, energy and performance, which cannot be easily solved with synchronous approaches. As a result, there has been significant recent interest in combing the notion of asynchrony with NoC designs. Since the NoC approach inherently separates the communication infrastructure, and its timing, from computational elements, it is a natural match for an asynchronous paradigm. Asynchronous NoC’s, therefore, enable a modular and extensible system composition for an ‘object-orient’ design style. The thesis aims to significantly advance the state-of-art and viability of asynchronous and globally-asynchronous locally-synchronous (GALS) networks-on-chip, to enable high-performance and low-energy systems. The proposed asynchronous NoC’s are nearly entirely based on standard cells, which eases their integration into industrial design flows. The contributions are instantiated in three different directions. First, practical acceleration techniques are proposed for optimizing the system latency, in order to break through the latency bottleneck in the memory interfaces of many on-chip parallel processors. Novel asynchronous network protocols are proposed, along with concrete NoC designs. A new concept, called ‘monitoring network’, is introduced. Monitoring networks are lightweight shadow networks used for fast-forwarding anticipated traffic information, ahead of the actual packet traffic. The routers are therefore allowed to initiate and perform arbitration and channel allocation in advance. The technique is successfully applied to two topologies which belong to two different categories – a variant mesh-of-trees (MoT) structure and a 2D-mesh topology. Considerable and stable latency improvements are observed across a wide range of traffic patterns, along with moderate throughput gains. Second, for the first time, a high-performance and low-power asynchronous NoC router is compared directly to a leading commercial synchronous counterpart in an advanced industrial technology. The asynchronous router design shows significant performance improvements, as well as area and power savings. The proposed asynchronous router integrates several advanced techniques, including a low-latency circular FIFO for buffer design, and a novel end-to-end credit-based virtual channel (VC) flow control. In addition, a semi-automated design flow is created, which uses portions of a standard synchronous tool flow. Finally, a high-performance multi-resource asynchronous arbiter design is developed. This small but important component can be directly used in existing asynchronous NoC’s for performance optimization. In addition, this standalone design promises use in opening up new NoC directions, as well as for general use in parallel systems. In the proposed arbiter design, the allocation of a resource to a client is divided into several steps. Multiple successive client-resource pairs can be selected rapidly in pipelined sequence, and the completion of the assignments can overlap in parallel. In sum, the thesis provides a set of advanced design solutions for performance optimization of asynchronous and GALS networks-on-chip. These solutions are at different levels, from network protocols, down to router- and component-level optimizations, which can be directly applied to existing basic asynchronous NoC designs to provide a leap in performance improvement

Design Space Exploration for MPSoC Architectures

Multiprocessor system-on-chip (MPSoC) designs utilize the available technology and communication architectures to meet the requirements of the upcoming applications. In MPSoC, the communication platform is both the key enabler, as well as the key differentiator for realizing efficient MPSoCs. It provides product differentiation to meet a diverse, multi-dimensional set of design constraints, including performance, power, energy, reconfigurability, scalability, cost, reliability and time-to-market. The communication resources of a single interconnection platform cannot be fully utilized by all kind of applications, such as the availability of higher communication bandwidth for computation but not data intensive applications is often unfeasible in the practical implementation. This thesis aims to perform the architecture-level design space exploration towards efficient and scalable resource utilization for MPSoC communication architecture. In order to meet the performance requirements within the design constraints, careful selection of MPSoC communication platform, resource aware partitioning and mapping of the application play important role. To enhance the utilization of communication resources, variety of techniques such as resource sharing, multicast to avoid re-transmission of identical data, and adaptive routing can be used. For implementation, these techniques should be customized according to the platform architecture. To address the resource utilization of MPSoC communication platforms, variety of architectures with different design parameters and performance levels, namely Segmented bus (SegBus), Network-on-Chip (NoC) and Three-Dimensional NoC (3D-NoC), are selected. Average packet latency and power consumption are the evaluation parameters for the proposed techniques. In conventional computing architectures, fault on a component makes the connected fault-free components inoperative. Resource sharing approach can utilize the fault-free components to retain the system performance by reducing the impact of faults. Design space exploration also guides to narrow down the selection of MPSoC architecture, which can meet the performance requirements with design constraints.Siirretty Doriast

A survey on scheduling and mapping techniques in 3D Network-on-chip

Network-on-Chips (NoCs) have been widely employed in the design of multiprocessor system-on-chips (MPSoCs) as a scalable communication solution. NoCs enable communications between on-chip Intellectual Property (IP) cores and allow those cores to achieve higher performance by outsourcing their communication tasks. Mapping and Scheduling methodologies are key elements in assigning application tasks, allocating the tasks to the IPs, and organising communication among them to achieve some specified objectives. The goal of this paper is to present a detailed state-of-the-art of research in the field of mapping and scheduling of applications on 3D NoC, classifying the works based on several dimensions and giving some potential research directions

Head-of-Line Blocking Reduction in Power-Efficient Networks-on-Chip

Tesis por compendioNowadays, thanks to the continuous improvements in the integration scale, more and more cores are added on the same chip, leading to higher system performance. In order to interconnect all nodes, a network-on-chip (NoC) is used, which is in charge of delivering data between cores. However, increasing the number of cores leads to a significant power consumption increase, leading the NoC to be one of the most expensive components in terms of power. Because of this, during the last years, several mechanisms have been proposed to address the NoC power consumption by means of DVFS (Dynamic Voltage and Frequency Scaling) and power-gating strategies. Nevertheless, improvements achieved by these mechanisms are achieved, to a greater or lesser extent, at the cost of system performance, potentially increasing the risk of saturating the network by forming congested points which, in turn, compromise the rest of the system functionality. One side effect is the creation of the "Head-of-Line blocking" effect where congested packets at the head of queues prevent other non-blocked packets from advancing. To address this issue, in this thesis, on one hand, we propose novel congestion control techniques in order to improve system performance by removing the "Head-of-Line" blocking effect. On the other hand, we propose combined solutions adapted to DVFS in order to achieve improvements in terms of performance and power. In addition to this, we propose a path-aware power-gating-based mechanism, which is capable of detecting the flows sharing buffer resources along data paths and perform to switch them off when not needed. With all these combined solutions we can significantly reduce the power consumption of the NoC when compared with state-of-the-art proposals.Hoy en día, gracias a las mejoras en la escala de integración cada vez se integran más y más núcleos en un mismo chip, mejorando así sus prestaciones. Para interconectar todos los nodos dentro del chip se emplea una red en chip (NoC, Network-on-Chip), la cual es la encargada de intercambiar información entre núcleos. No obstante, aumentar el número de núcleos en el chip también conlleva a su vez un importante incremento en el consumo de la NoC, haciendo que ésta se convierta en una de las partes más caras del chip en términos de consumo. Por ello, en los últimos años se han propuesto diversas técnicas de ahorro de energía orientadas a reducir el consumo de la NoC mediante el uso de DVFS (Dynamic Voltage and Frequency Scaling) o estrategias basadas en "power-gating". Sin embargo, éstas mejoras de consumo normalmente se obtienen a costa de sacrificar, en mayor o menor medida, las prestaciones del sistema, aumentado potencialmente así el riesgo de saturar la red, generando puntos de congestión que, a su vez, comprometen el rendimiento del resto del sistema. Un efecto colateral es el "Head-of-Line blocking", mediante el que paquetes congestionados en la cabeza de la cola impiden que otros paquetes no congestionados avancen. Con el fin de solucionar este problema, en ésta tesis, en primer lugar, proponemos técnicas novedosas de control de congestión para incrementar el rendimiento del sistema mediante la eliminación del "Head-of-Line blocking", mientras que, por otra parte, proponemos soluciones combinadas adaptadas a DVFS con el fin de conseguir mejoras en términos de rendimiento y energía. Además, proponemos una técnica de "power-gating" orientada a rutas de datos, la cual es capaz de detectar flujos de datos compartiendo recursos a lo largo de rutas y apagar dichos recursos de forma dinámica cuando no son necesarios. Con todas éstas soluciones combinadas podemos reducir el consumo de energía de la NoC en comparación con otras técnicas presentes en el estado del arte.Hui en dia, gr\`acies a les millores en l'escala d'integraci\'o, cada vegada s'integren m\'es i m\'es nuclis en un mateix xip, la qual cosa millora les seues prestacions. Per tal d'interconectar tots els nodes dins el xip es fa \'us d'una Xarxa en Xip (NoC; Network-on-Chip), la qual \'es l'encarregada d'intercanviar informaci\'o entre els nuclis. No obstant aix\`o, incrementar el nombre de nuclis en el xip tamb\'e comporta un important augment en el consum de la NoC, la qual cosa fa que aquesta es convertisca en una de les parts m\'es costoses del xip en termes de consum. Per aix\`o, en els \'ultims anys s'han proposat diverses t\`ecniques d'estalvi d'energia orientades a reduir el consum de la NoC mitjançant l'\'us de DVFS (Dynamic Voltage and Frequency Scaling) o estrat\`egies basades en ``power-gating''. Malgrat aix\`o, aquestes millores en les prestacions normalment s'obtenen a costa de sacrificar, en major o menor mesura, les prestacions del sistema i augmenta aix\'i el risc de saturar la xarxa al generar-se punts de congesti\'o, que al mateix temps, comprometen el rendiment de la resta del sistema. Un efecte col-lateral \'es el ``Head-of- Line blocking'', mitjançant el qual, els paquets congestionats al cap de la cua, impedixen que altres paquets no congestionats avancen. A fi de solucionar eixe problema, en aquesta tesi, en primer lloc, proposem noves t\`ecniques de control de congesti\'o amb l'objectiu d'incrementar el rendiment del sistema per mitj\`a de l'eliminaci\'o del ``Head-of- Line blocking'', i d'altra banda, proposem solucions combinades adaptades a DVFS amb la finalitat d'aconseguir millores en termes de rendiment i energia. A m\'es, proposem una t\`ecnica de ``power-gating'' orientada a rutes de dades, la qual \'es capa\c c de detectar fluxos de dades al compartir recursos al llarg de les rutes i apagar eixos recursos de forma din\`amica quan no s\'on necessaris. Amb totes aquestes solucions combinades podem reduir el consum d'energia de la NoC en comparaci\'o amb altres t\`ecniques presents en l'estat de l'art.Escamilla López, JV. (2017). Head-of-Line Blocking Reduction in Power-Efficient Networks-on-Chip [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/90419TESISCompendi

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.Siirretty Doriast

BOOM: Broadcast Optimizations for On-chip Meshes

Future many-core chips will require an on-chip network that can support broadcasts and multicasts at good power-performance. A vanilla on-chip network would send multiple unicast packets for each broadcast packet, resulting in latency, throughput and power overheads. Recent research in on-chip multicast support has proposed forking of broadcast/multicast packets within the network at the router buffers, but these techniques are far from ideal, since they increase buffer occupancy which lowers throughput, and packets incur delay and power penalties at each router. In this work, we analyze an ideal broadcast mesh; show the substantial gaps between state-of-the-art multicast NoCs and the ideal; then propose BOOM, which comprises a WHIRL routing protocol that ideally load balances broadcast traffic, a mXbar multicast crossbar circuit that enables multicast traversal at similar energy-delay as unicasts, and speculative bypassing of buffering for multicast flits. Together, they enable broadcast packets to approach the delay, energy, and throughput of the ideal fabric. Our simulations show BOOM realizing an average network latency that is 5% off ideal, attaining 96% of ideal throughput, with energy consumption that is 9% above ideal. Evaluations using synthetic traffic show BOOM achieving a latency reduction of 61%, throughput improvement of 63%, and buffer power reduction of 80% as compared to a baseline broadcast. Simulations with PARSEC benchmarks show BOOM reducing average request and network latency by 40% and 15% respectively

Driving the Network-on-Chip Revolution to Remove the Interconnect Bottleneck in Nanoscale Multi-Processor Systems-on-Chip

The sustained demand for faster, more powerful chips has been met by the availability of chip manufacturing processes allowing for the integration of increasing numbers of computation units onto a single die. The resulting outcome, especially in the embedded domain, has often been called SYSTEM-ON-CHIP (SoC) or MULTI-PROCESSOR SYSTEM-ON-CHIP (MP-SoC). MPSoC design brings to the foreground a large number of challenges, one of the most prominent of which is the design of the chip interconnection. With a number of on-chip blocks presently ranging in the tens, and quickly approaching the hundreds, the novel issue of how to best provide on-chip communication resources is clearly felt. NETWORKS-ON-CHIPS (NoCs) are the most comprehensive and scalable answer to this design concern. By bringing large-scale networking concepts to the on-chip domain, they guarantee a structured answer to present and future communication requirements. The point-to-point connection and packet switching paradigms they involve are also of great help in minimizing wiring overhead and physical routing issues. However, as with any technology of recent inception, NoC design is still an evolving discipline. Several main areas of interest require deep investigation for NoCs to become viable solutions: • The design of the NoC architecture needs to strike the best tradeoff among performance, features and the tight area and power constraints of the onchip domain. • Simulation and verification infrastructure must be put in place to explore, validate and optimize the NoC performance. • NoCs offer a huge design space, thanks to their extreme customizability in terms of topology and architectural parameters. Design tools are needed to prune this space and pick the best solutions. • Even more so given their global, distributed nature, it is essential to evaluate the physical implementation of NoCs to evaluate their suitability for next-generation designs and their area and power costs. This dissertation performs a design space exploration of network-on-chip architectures, in order to point-out the trade-offs associated with the design of each individual network building blocks and with the design of network topology overall. The design space exploration is preceded by a comparative analysis of state-of-the-art interconnect fabrics with themselves and with early networkon- chip prototypes. The ultimate objective is to point out the key advantages that NoC realizations provide with respect to state-of-the-art communication infrastructures and to point out the challenges that lie ahead in order to make this new interconnect technology come true. Among these latter, technologyrelated challenges are emerging that call for dedicated design techniques at all levels of the design hierarchy. In particular, leakage power dissipation, containment of process variations and of their effects. The achievement of the above objectives was enabled by means of a NoC simulation environment for cycleaccurate modelling and simulation and by means of a back-end facility for the study of NoC physical implementation effects. Overall, all the results provided by this work have been validated on actual silicon layout