Resource and thermal management in 3D-stacked multi-/many-core systems

Continuous semiconductor technology scaling and the rapid increase in computational needs have stimulated the emergence of multi-/many-core processors. While up to hundreds of cores can be placed on a single chip, the performance capacity of the cores cannot be fully exploited due to high latencies of interconnects and memory, high power consumption, and low manufacturing yield in traditional (2D) chips. 3D stacking is an emerging technology that aims to overcome these limitations of 2D designs by stacking processor dies over each other and using through-silicon-vias (TSVs) for on-chip communication, and thus, provides a large amount of on-chip resources and shortens communication latency. These benefits, however, are limited by challenges in high power densities and temperatures. 3D stacking also enables integrating heterogeneous technologies into a single chip. One example of heterogeneous integration is building many-core systems with silicon-photonic network-on-chip (PNoC), which reduces on-chip communication latency significantly and provides higher bandwidth compared to electrical links. However, silicon-photonic links are vulnerable to on-chip thermal and process variations. These variations can be countered by actively tuning the temperatures of optical devices through micro-heaters, but at the cost of substantial power overhead. This thesis claims that unearthing the energy efficiency potential of 3D-stacked systems requires intelligent and application-aware resource management. Specifically, the thesis improves energy efficiency of 3D-stacked systems via three major components of computing systems: cache, memory, and on-chip communication. We analyze characteristics of workloads in computation, memory usage, and communication, and present techniques that leverage these characteristics for energy-efficient computing. This thesis introduces 3D cache resource pooling, a cache design that allows for flexible heterogeneity in cache configuration across a 3D-stacked system and improves cache utilization and system energy efficiency. We also demonstrate the impact of resource pooling on a real prototype 3D system with scratchpad memory. At the main memory level, we claim that utilizing heterogeneous memory modules and memory object level management significantly helps with energy efficiency. This thesis proposes a memory management scheme at a finer granularity: memory object level, and a page allocation policy to leverage the heterogeneity of available memory modules and cater to the diverse memory requirements of workloads. On the on-chip communication side, we introduce an approach to limit the power overhead of PNoC in (3D) many-core systems through cross-layer thermal management. Our proposed thermally-aware workload allocation policies coupled with an adaptive thermal tuning policy minimize the required thermal tuning power for PNoC, and in this way, help broader integration of PNoC. The thesis also introduces techniques in placement and floorplanning of optical devices to reduce optical loss and, thus, laser source power consumption.2018-03-09T00:00:00

Energy-efficient electrical and silicon-photonic networks in many core systems

Thesis (Ph.D.)--Boston UniversityDuring the past decade, the very large scale integration (VLSI) community has migrated towards incorporating multiple cores on a single chip to sustain the historic performance improvement in computing systems. As the core count continuously increases, the performance of network-on-chip (NoC), which is responsible for the communication between cores, caches and memory controllers, is increasingly becoming critical for sustaining the performance improvement. In this dissertation, we propose several methods to improve the energy efficiency of both electrical and silicon-photonic NoCs. Firstly, for electrical NoC, we propose a flow control technique, Express Virtual Channel with Taps (EVC-T), to transmit both broadcast and data packets efficiently in a mesh network. A low-latency notification tree network is included to maintain t he order of broadcast packets. The EVC-T technique improves the NoC latency by 24% and the system energy efficiency in terms of energy-delay product (EDP) by 13%. In the near future, the silicon-photonic links are projected to replace the electrical links for global on-chip communication due to their lower data-dependent power and higher bandwidth density, but the high laser power can more than offset these advantages. Therefore, we propose a silicon-photonic multi-bus NoC architecture and a methodology that can reduce the laser power by 49% on average through bandwidth reconfiguration at runtime based on the variations in bandwidth requirements of applications. We also propose a technique to reduce the laser power by dynamically activating/deactivating the 12 cache banks and switching ON/ OFF the corresponding silicon-photonic links in a crossbar NoC. This cache-reconfiguration based technique can save laser power by 23.8% and improves system EDP by 5.52% on average. In addition, we propose a methodology for placing and sharing on-chip laser sources by jointly considering the bandwidth requirements, thermal constraints and physical layout constraints. Our proposed methodology for placing and sharing of on-chip laser sources reduces laser power. In addition to reducing the laser power to improve the energy efficiency of silicon-photonic NoCs, we propose to leverage the large bandwidth provided by silicon-photonic NoC to share computing resources. The global sharing of floating-point units can save system area by 13.75% and system power by 10%

Design of Optical Interconnect Transceiver Circuits and Network-on-chip Architectures for Inter- and Intra-chip Communication

The rapid expansion in data communication due to the increased multimedia applications and cloud computing services necessitates improvements in optical transceiver circuitry power efficiency as these systems scale well past 10 Gb/s. In order to meet these requirements, a 26 GHz transimpedance amplifier (TIA) is presented in a 0.25-µm SiGe BiCMOS technology. It employs a transformer-based regulated cascode (RGC) input stage which provides passive negative-feedback gain that enhances the effective transconductance of the TIA’s input common-base transistor; reducing the input resistance and pro- viding considerable bandwidth extension without significant noise degradation or power consumption. The TIA achieves a 53 dBΩ single-ended transimpedance gain with a 26√ GHz bandwidth and 21.3 pA/H z average input-referred noise current spectral density. Total chip power including output buffering is 28.2 mW from a 2.5 V supply, with the core TIA consuming 8.2 mW, and the chip area including pads is 960 µm × 780 µm. With the advance of photonic devices, optical interconnects becomes a promising technology to replace the conventional electrical channels for the high-bandwidth and power efficient inter/intra-chip interconnect. Second, a silicon photonic transceiver is presented for a silicon ring resonator-based optical interconnect architecture in a 1V standard 65nm CMOS technology. The transmitter circuits incorporate high-swing drivers with non-linear pre-emphasis and automatic bias-based tuning for resonance wavelength stabilization. An optical forwarded-clock adaptive inverter-based transimpedance amplifier (TIA) receiver trades-off power for varying link budgets by employing an on-die eye monitor and scaling the TIA supply for the required sensitivity. At 5 GB/s operation, the ring modulator un- der 4Vpp driver achieves 12.7dB extinction ratio with 4.04mW power consumption, while a 0.28nm tuning range is obtained at 6.8µW/GHz efficiency with the bias-based tuning scheme implemented with the 2Vpp transmitter. When tested with a wire-bonded 150f- F p-i-n photodetector, the receiver achieves -12.7dBm sensitivity at a BER=10−15 and consumes 2.2mW at 8 GB/s. Third, a novel Nano-Photonic Network-on-Chip (NoC) architecture, called LumiNoC, is proposed for high performance and power-efficient interconnects for the chip-multi- processors (CMPs). A 64-node LumiNoC under synthetic traffic enjoys 50% less latency at low loads versus other reported photonic NoCs, and ∼25% less latency versus the electrical 2D mesh NoCs on realistic workloads. Under the same ideal throughput, LumiNoC achieves laser power reduction of 78%, and overall power reduction of 44% versus competing designs

Novel Cache Hierarchies with Photonic Interconnects for Chip Multiprocessors

[ES] Los procesadores multinúcleo actuales cuentan con recursos compartidos entre los diferentes núcleos. Dos de estos recursos compartidos, la cache de último nivel y el ancho de banda de memoria principal, pueden convertirse en cuellos de botella para el rendimiento. Además, con el crecimiento del número de núcleos que implementan los diseños más recientes, la red dentro del chip también se convierte en un cuello de botella que puede afectar negativamente al rendimiento, ya que las redes tradicionales pueden encontrar limitaciones a su escalabilidad en el futuro cercano. Prácticamente la totalidad de los diseños actuales implementan jerarquías de memoria que se comunican mediante rápidas redes de interconexión. Esta organización es eficaz dado que permite reducir el número de accesos que se realizan a memoria principal y la latencia media de acceso a memoria. Las caches, la red de interconexión y la memoria principal, conjuntamente con otras técnicas conocidas como la prebúsqueda, permiten reducir las enormes latencias de acceso a memoria principal, limitando así el impacto negativo ocasionado por la diferencia de rendimiento existente entre los núcleos de cómputo y la memoria. Sin embargo, compartir los recursos mencionados es fuente de diferentes problemas y retos, siendo uno de los principales el manejo de la interferencia entre aplicaciones. Hacer un uso eficiente de la jerarquía de memoria y las caches, así como contar con una red de interconexión apropiada, es necesario para sostener el crecimiento del rendimiento en los diseños tanto actuales como futuros. Esta tesis analiza y estudia los principales problemas e inconvenientes observados en estos dos recursos: la cache de último nivel y la red dentro del chip. En primer lugar, se estudia la escalabilidad de las tradicionales redes dentro del chip con topología de malla, así como esta puede verse comprometida en próximos diseños que cuenten con mayor número de núcleos. Los resultados de este estudio muestran que, a mayor número de núcleos, el impacto negativo de la distancia entre núcleos en la latencia puede afectar seriamente al rendimiento del procesador. Como solución a este problema, en esta tesis proponemos una de red de interconexión óptica modelada en un entorno de simulación detallado, que supone una solución viable a los problemas de escalabilidad observados en los diseños tradicionales. A continuación, esta tesis dedica un esfuerzo importante a identificar y proponer soluciones a los principales problemas de diseño de las jerarquías de memoria actuales como son, por ejemplo, el sobredimensionado del espacio de cache privado, la existencia de réplicas de datos y rigidez e incapacidad de adaptación de las estructuras de cache. Aunque bien conocidos, estos problemas y sus efectos adversos en el rendimiento pueden ser evitados en procesadores de alto rendimiento gracias a la enorme capacidad de la cache de último nivel que este tipo de procesadores típicamente implementan. Sin embargo, en procesadores de bajo consumo, no existe la posibilidad de contar con tales capacidades y hacer un uso eficiente del espacio disponible es crítico para mantener el rendimiento. Como solución a estos problemas en procesadores de bajo consumo, proponemos una novedosa organización de jerarquía de dos niveles cache que utiliza una red de interconexión óptica. Los resultados obtenidos muestran que, comparado con diseños convencionales, el consumo de energía estática en la arquitectura propuesta es un 60% menor, pese a que los resultados de rendimiento presentan valores similares. Por último, hemos extendido la arquitectura propuesta para dar soporte tanto a aplicaciones paralelas como secuenciales. Los resultados obtenidos con la esta nueva arquitectura muestran un ahorro de hasta el 78 % de energía estática en la ejecución de aplicaciones paralelas.[CA] Els processadors multinucli actuals compten amb recursos compartits entre els diferents nuclis. Dos d'aquests recursos compartits, la memòria d’últim nivell i l'ample de banda de memòria principal, poden convertir-se en colls d'ampolla per al rendiment. A mes, amb el creixement del nombre de nuclis que implementen els dissenys mes recents, la xarxa dins del xip també es converteix en un coll d'ampolla que pot afectar negativament el rendiment, ja que les xarxes tradicionals poden trobar limitacions a la seva escalabilitat en el futur proper. Pràcticament la totalitat dels dissenys actuals implementen jerarquies de memòria que es comuniquen mitjançant rapides xarxes d’interconnexió. Aquesta organització es eficaç ates que permet reduir el nombre d'accessos que es realitzen a memòria principal i la latència mitjana d’accés a memòria. Les caches, la xarxa d’interconnexió i la memòria principal, conjuntament amb altres tècniques conegudes com la prebúsqueda, permeten reduir les enormes latències d’accés a memòria principal, limitant així l'impacte negatiu ocasionat per la diferencia de rendiment existent entre els nuclis de còmput i la memòria. No obstant això, compartir els recursos esmentats és font de diversos problemes i reptes, sent un dels principals la gestió de la interferència entre aplicacions. Fer un us eficient de la jerarquia de memòria i les caches, així com comptar amb una xarxa d’interconnexió apropiada, es necessari per sostenir el creixement del rendiment en els dissenys tant actuals com futurs. Aquesta tesi analitza i estudia els principals problemes i inconvenients observats en aquests dos recursos: la memòria cache d’últim nivell i la xarxa dins del xip. En primer lloc, s'estudia l'escalabilitat de les xarxes tradicionals dins del xip amb topologia de malla, així com aquesta es pot veure compromesa en propers dissenys que compten amb major nombre de nuclis. Els resultats d'aquest estudi mostren que, a major nombre de nuclis, l'impacte negatiu de la distància entre nuclis en la latència pot afectar seriosament al rendiment del processador. Com a solució' a aquest problema, en aquesta tesi proposem una xarxa d’interconnexió' òptica modelada en un entorn de simulació detallat, que suposa una solució viable als problemes d'escalabilitat observats en els dissenys tradicionals. A continuació, aquesta tesi dedica un esforç important a identificar i proposar solucions als principals problemes de disseny de les jerarquies de memòria actuals com son, per exemple, el sobredimensionat de l'espai de memòria cache privat, l’existència de repliques de dades i la rigidesa i incapacitat d’adaptació' de les estructures de memòria cache. Encara que ben coneguts, aquests problemes i els seus efectes adversos en el rendiment poden ser evitats en processadors d'alt rendiment gracies a l'enorme capacitat de la memòria cache d’últim nivell que aquest tipus de processadors típicament implementen. No obstant això, en processadors de baix consum, no hi ha la possibilitat de comptar amb aquestes capacitats, i fer un us eficient de l'espai disponible es torna crític per mantenir el rendiment. Com a solució a aquests problemes en processadors de baix consum, proposem una nova organització de jerarquia de dos nivells de memòria cache que utilitza una xarxa d’interconnexió òptica. Els resultats obtinguts mostren que, comparat amb dissenys convencionals, el consum d'energia estàtica en l'arquitectura proposada és un 60% menor, malgrat que els resultats de rendiment presenten valors similars. Per últim, hem estes l'arquitectura proposada per donar suport tant a aplicacions paral·leles com seqüencials. Els resultats obtinguts amb aquesta nova arquitectura mostren un estalvi de fins al 78 % d'energia estàtica en l’execució d'aplicacions paral·leles.[EN] Current multicores face the challenge of sharing resources among the different processor cores. Two main shared resources act as major performance bottlenecks in current designs: the off-chip main memory bandwidth and the last level cache. Additionally, as the core count grows, the network on-chip is also becoming a potential performance bottleneck, since traditional designs may find scalability issues in the near future. Memory hierarchies communicated through fast interconnects are implemented in almost every current design as they reduce the number of off-chip accesses and the overall latency, respectively. Main memory, caches, and interconnection resources, together with other widely-used techniques like prefetching, help alleviate the huge memory access latencies and limit the impact of the core-memory speed gap. However, sharing these resources brings several concerns, being one of the most challenging the management of the inter-application interference. Since almost every running application needs to access to main memory, all of them are exposed to interference from other co-runners in their way to the memory controller. For this reason, making an efficient use of the available cache space, together with achieving fast and scalable interconnects, is critical to sustain the performance in current and future designs. This dissertation analyzes and addresses the most important shortcomings of two major shared resources: the Last Level Cache (LLC) and the Network on Chip (NoC). First, we study the scalability of both electrical and optical NoCs for future multicoresand many-cores. To perform this study, we model optical interconnects in a cycle-accurate multicore simulation framework. A proper model is required; otherwise, important performance deviations may be observed otherwise in the evaluation results. The study reveals that, as the core count grows, the effect of distance on the end-to-end latency can negatively impact on the processor performance. In contrast, the study also shows that silicon nanophotonics are a viable solution to solve the mentioned latency problems. This dissertation is also motivated by important design concerns related to current memory hierarchies, like the oversizing of private cache space, data replication overheads, and lack of flexibility regarding sharing of cache structures. These issues, which can be overcome in high performance processors by virtue of huge LLCs, can compromise performance in low power processors. To address these issues we propose a more efficient cache hierarchy organization that leverages optical interconnects. The proposed architecture is conceived as an optically interconnected two-level cache hierarchy composed of multiple cache modules that can be dynamically turned on and off independently. Experimental results show that, compared to conventional designs, static energy consumption is improved by up to 60% while achieving similar performance results. Finally, we extend the proposal to support both sequential and parallel applications. This extension is required since the proposal adapts to the dynamic cache space needs of the running applications, and multithreaded applications's behaviors widely differ from those of single threaded programs. In addition, coherence management is also addressed, which is challenging since each cache module can be assigned to any core at a given time in the proposed approach. For parallel applications, the evaluation shows that the proposal achieves up to 78% static energy savings. In summary, this thesis tackles major challenges originated by the sharing of on-chip caches and communication resources in current multicores, and proposes new cache hierarchy organizations leveraging optical interconnects to address them. The proposed organizations reduce both static and dynamic energy consumption compared to conventional approaches while achieving similar performance; which results in better energy efficiency.Puche Lara, J. (2021). Novel Cache Hierarchies with Photonic Interconnects for Chip Multiprocessors [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/165254TESI

Photonic Interconnects Beyond High Bandwidth

The extraordinary growth of parallelism in high-performance computing requires efficient data communication for scaling compute performance. High-performance computing systems have been using photonic links for communication of large bandwidth-distance product during the last decade. Photonic interconnection networks, however, should not be a wire-for-wire replacement based on conventional electrical counterparts. Features of photonics beyond high bandwidth, such as transparent bandwidth steering, can implement important functionalities needed by applications. In another aspect, application characteristics can be exploited to design better photonic interconnects. Therefore, this thesis explores codesign opportunities at the intersection between photonic interconnect architectures and high-performance computing applications. The key accomplishments of this thesis, ranging from system level to node level, are as follows. Chapter 2 presents a system-level architecture that leverages photonic switching to enable a reconfigurable interconnect. The architecture, called Flexfly, reconfigures the inter-group level of the widely-used Dragonfly topology using information about the application’s communication pattern. It can steal additional direct bandwidth for communication-intensive group pairs. Simulations with applications such as GTC, Nekbone and LULESH show up to 1.8x speedup over Dragonfly paired with UGAL routing, along with halved hop count and latency for cross-group messages. To demonstrate the effectiveness of our approach, we built a 32-node Flexfly prototype using a silicon photonic switch connecting four groups and demonstrated 820 ns interconnect reconfiguration time. This is the first demonstration of silicon photonic switching and bandwidth steering in a high-performance computing cluster. Chapter 3 extends photonic switching to the node level and presents a reconfigurable silicon photonic memory interconnect for many-core architectures. The interconnect targets at important memory access issues, such as network-on-chip hot-spots and non-uniform memory access. Integrated with the processor through 2.5D/3D stacking, a fast-tunable silicon photonic memory tunnel can transparently direct traffic from any off-chip memory to any on-chip interface – thus alleviating the hot-spot and non-uniform access effects. We demonstrated the operation of our proposed architecture using a tunable laser, a 4-port silicon photonic switch (four wavelength-routed memory channels) and a 4x4 mesh network-on-chip synthesized by FPGA. The emulated system achieves a 15-ns channel switching time. Simulations based on a 12-core 4-memory model show that for such switching speeds the interconnect system can realize a 2x speedup for the STREAM benchmark in the hot-spot scenario and a reduction of execution time for data-intensive applications such as 3D stencil and K-means clustering by 23% and 17%, respectively. Chapters 4 explores application-level characteristics that can be exploited to hide photonic path setup delays. In view of the frequent reuse of optical circuits by many applications, we proposed a circuit-cached scheme that amortizes the setup overhead by maximizing circuit reuses. In order to improve circuit “hit” rates, we developed a reuse-distance based replacement policy called “Farthest Next Use”. We further investigated the tradeoffs between the realized hit rate and energy consumption. Finally, we experimentally demonstrated the feasibility of the proposed concept using silicon photonic devices in an FPGA-controlled network testbed. Chapter 5 proceeds to develop an application-guided circuit-prefetch scheme. By learning temporal locality and communication patterns from upper-layer applications, the scheme not only caches a set of circuits for reuses, but also proactively prefetches circuits based on predictions. We applied this technique to communication patterns from a spectrum of science and engineering applications. The results show that setup delays via circuit misses are significantly reduced, showing how the proposed technique can improve circuit switching in photonic interconnects

Variation-Aware Modeling and Design of Nanophotonic Interconnects

Optical interconnects have started to replace electrical interconnects in the communications between racks and circuit boards with potential benefits in bandwidth, delay, power efficiency, and crosstalk. Silicon photonics has emerged to be a highly promising enabling technology for the short-reach nanophotonic interconnects because it offers favorable CMOS compatibility and high integration level. The fast-growing complexity of photonic integrated circuit (PIC) and close electro-optical integration call for computer-aided design (CAD) for integrated photonics, and electronic-photonic design automation (EPDA) including accurate behavior models and efficient simulation methodologies for integrated electro-optical systems. Also, the nanophotonic devices are highly sensitive to fabrication process variation and thermal variation effects, which requires proper modeling, optimization, and management schemes. To address these problems, this thesis is dedicated to the following two tasks: (1) compact modeling and circuit-level simulation of nanophotonic interconnects, and (2) power-efficient management of the variation effects in nanophotonic interconnects.The first part of the thesis develops compact models for key components in nanophotonic interconnects including silicon microring modulators, diode lasers, electro-absorption modulators (EAM), photodetectors, etc. These compact models are developed based on their electrical and optical properties, and are then extensively validated by measurement data. The model parameters are extracted from common electrical and optical tests. Implemented in Verilog-A, the models are used in SPICE simulations of optical links, whose results again agree well with measurement data. The compact model library and the simulation methodology enable electro-optical co-simulations and optical device design explorations in the circuit-level.In the second part of the thesis, we propose modeling methods and power-efficient management schemes for the process and thermal variations in optical interconnects. The proposed adaptive tuning technique performs on-chip self-tests and adaptively allocates just enough power for link operations. The technique saves significant amount of power compared to worst-case based conservative designs, and scales well w.r.t. variations and network size. We also design power-efficient pairing algorithms for microring-based optical interconnects. Our algorithms optimally mix-and-match microring-based devices to minimize the power consumption for tuning. The algorithms are tested on both measured and synthetic data sets, demonstrating promising results of power reduction and scalability for handling a large number of devices. Lastly, we decompose and analyze wafer-scale spatial patterns of process variations in microring modulators. We further investigate the correlations between the spatial patterns and fabrication process steps, which is valuable for understanding process variation sources and improving fabrication processes for uniformity

Cross-Layer Pathfinding for Off-Chip Interconnects

Off-chip interconnects for integrated circuits (ICs) today induce a diverse design space, spanning many different applications that require transmission of data at various bandwidths, latencies and link lengths. Off-chip interconnect design solutions are also variously sensitive to system performance, power and cost metrics, while also having a strong impact on these metrics. The costs associated with off-chip interconnects include die area, package (PKG) and printed circuit board (PCB) area, technology and bill of materials (BOM). Choices made regarding off-chip interconnects are fundamental to product definition, architecture, design implementation and technology enablement. Given their cross-layer impact, it is imperative that a cross-layer approach be employed to architect and analyze off-chip interconnects up front, so that a top-down design flow can comprehend the cross-layer impacts and correctly assess the system performance, power and cost tradeoffs for off-chip interconnects. Chip architects are not exposed to all the tradeoffs at the physical and circuit implementation or technology layers, and often lack the tools to accurately assess off-chip interconnects. Furthermore, the collaterals needed for a detailed analysis are often lacking when the chip is architected; these include circuit design and layout, PKG and PCB layout, and physical floorplan and implementation. To address the need for a framework that enables architects to assess the system-level impact of off-chip interconnects, this thesis presents power-area-timing (PAT) models for off-chip interconnects, optimization and planning tools with the appropriate abstraction using these PAT models, and die/PKG/PCB co-design methods that help expose the off-chip interconnect cross-layer metrics to the die/PKG/PCB design flows. Together, these models, tools and methods enable cross-layer optimization that allows for a top-down definition and exploration of the design space and helps converge on the correct off-chip interconnect implementation and technology choice. The tools presented cover off-chip memory interfaces for mobile and server products, silicon photonic interfaces, 2.5D silicon interposers and 3D through-silicon vias (TSVs). The goal of the cross-layer framework is to assess the key metrics of the interconnect (such as timing, latency, active/idle/sleep power, and area/cost) at an appropriate level of abstraction by being able to do this across layers of the design flow. In additional to signal interconnect, this thesis also explores the need for such cross-layer pathfinding for power distribution networks (PDN), where the system-on-chip (SoC) floorplan and pinmap must be optimized before the collateral layouts for PDN analysis are ready. Altogether, the developed cross-layer pathfinding methodology for off-chip interconnects enables more rapid and thorough exploration of a vast design space of off-chip parallel and serial links, inter-die and inter-chiplet links and silicon photonics. Such exploration will pave the way for off-chip interconnect technology enablement that is optimized for system needs. The basis of the framework can be extended to cover other interconnect technology as well, since it fundamentally relates to system-level metrics that are common to all off-chip interconnects

Energy-efficient architectures for chip-scale networks and memory systems using silicon-photonics technology

Today's supercomputers and cloud systems run many data-centric applications such as machine learning, graph algorithms, and cognitive processing, which have large data footprints and complex data access patterns. With computational capacity of large-scale systems projected to rise up to 50GFLOPS/W, the target energy-per-bit budget for data movement is expected to reach as low as 0.1pJ/bit, assuming 200bits/FLOP for data transfers. This tight energy budget impacts the design of both chip-scale networks and main memory systems. Conventional electrical links used in chip-scale networks (0.5-3pJ/bit) and DRAM systems used in main memory (>30pJ/bit) fail to provide sustained performance at low energy budgets. This thesis builds on the promising research on silicon-photonic technology to design system architectures and system management policies for chip-scale networks and main memory systems. The adoption of silicon-photonic links as chip-scale networks, however, is hampered by the high sensitivity of optical devices towards thermal and process variations. These device sensitivities result in high power overheads at high-speed communications. Moreover, applications differ in their resource utilization, resulting in application-specific thermal profiles and bandwidth needs. Similarly, optically-controlled memory systems designed using conventional electrical-based architectures require additional circuitry for electrical-to-optical and optical-to-electrical conversions within memory. These conversions increase the energy and latency per memory access. Due to these issues, chip-scale networks and memory systems designed using silicon-photonics technology leave much of their benefits underutilized. This thesis argues for the need to rearchitect memory systems and redesign network management policies such that they are aware of the application variability and the underlying device characteristics of silicon-photonic technology. We claim that such a cross-layer design enables a high-throughput and energy-efficient unified silicon-photonic link and main memory system. This thesis undertakes the cross-layer design with silicon-photonic technology in two fronts. First, we study the varying network bandwidth requirements across different applications and also within a given application. To address this variability, we develop bandwidth allocation policies that account for application needs and device sensitivities to ensure power-efficient operation of silicon-photonic links. Second, we design a novel architecture of an optically-controlled main memory system that is directly interfaced with silicon-photonic links using a novel read and write access protocol. Such a system ensures low-energy and high-throughput access from the processor to a high-density memory. To further address the diversity in application memory characteristics, we explore heterogeneous memory systems with multiple memory modules that provide varied power-performance benefits. We design a memory management policy for such systems that allocates pages at the granularity of memory objects within an application

The effect of an optical network on-chip on the performance of chip multiprocessors

Optical networks on-chip (ONoC) have been proposed to reduce power consumption and increase bandwidth density in high performance chip multiprocessors (CMP), compared to electrical NoCs. However, as buffering in an ONoC is not viable, the end-to-end message path needs to be acquired in advance during which the message is buffered at the network ingress. This waiting latency is therefore a combination of path setup latency and contention and forms a significant part of the total message latency. Many proposed ONoCs, such as Single Writer, Multiple Reader (SWMR), avoid path setup latency at the expense of increased optical components. In contrast, this thesis investigates a simple circuit-switched ONoC with lower component count where nodes need to request a channel before transmission. To hide the path setup latency, a coherence-based message predictor is proposed, to setup circuits before message arrival. Firstly, the effect of latency and bandwidth on application performance is thoroughly investigated using full-system simulations of shared memory CMPs. It is shown that the latency of an ideal NoC affects the CMP performance more than the NoC bandwidth. Increasing the number of wavelengths per channel decreases the serialisation latency and improves the performance of both ONoC types. With 2 or more wavelengths modulating at 25 Gbit=s , the ONoCs will outperform a conventional electrical mesh (maximal speedup of 20%). The SWMR ONoC outperforms the circuit-switched ONoC. Next coherence-based prediction techniques are proposed to reduce the waiting latency. The ideal coherence-based predictor reduces the waiting latency by 42%. A more streamlined predictor (smaller than a L1 cache) reduces the waiting latency by 31%. Without prediction, the message latency in the circuit-switched ONoC is 11% larger than in the SWMR ONoC. Applying the realistic predictor reverses this: the message latency in the SWMR ONoC is now 18% larger than the predictive circuitswitched ONoC