99 research outputs found

    Adaptive sliding-mode-backstepping trajectory tracking control of underactuated airships

    Get PDF
    The problem of trajectory tracking control for an underactuated stratospheric airship with model parameter uncertainties and wind disturbances is addressed in the paper. An adaptive backstepping sliding-mode controller is designed from the airship nonlinear dynamics model. The proposed controller has a two-level structure for trajectory guidance, tracking and stability, and the developed controller, based on nonlinear adaptive sliding-mode backstepping method, provides airship attitude and velocity control for the entire flight process. Furthermore, an active set based weighted least square algorithm is applied to find the optimal control surface inputs and the thruster commands under constraints of actuator saturation. The closed-loop system of trajectory tracking control plant is proved to be globally asymptotically stable by using Lyapunov theory. By comparing with traditional backstepping control and PID design, the results obtained demonstrate the capacity of the airship to execute a realistic trajectory tracking mission under two cases of lateral- and roll- underactuations, even in the presence of aerodynamic coefficient uncertainties, and wind disturbances

    Degraded planetary tracking control of an omni-directional vectored-thruster aerostat

    Get PDF
    The problem of horizontal-plane tracking control of an omni-directional, four vectored-thruster aerostat when subjected to actuator failure is considered. The actuator failures result in the aerostat becoming underactuated, so it can only effect surge force and pure yaw moment about the body centre. To achieve accurate position control in the horizontal plane, direct position control is used instead of heading control. This mode of controller is called degraded tracking control in contrast to full authority control of the overactuated four vectored-thruster aerostat. This degraded tracking controller uses commanded yaw rate to track lateral position, and yaw moment to eliminate lateral position error, therefore yaw angle is not directly controlled. To guarantee the stability of the yaw motion, a Virtual Reference Point (VRP) tracking strategy is proposed, where the VRP is used instead of the body center (BC) in position tracking. The VRP generates a negative compensated force in the surge direction which makes the side-force and yaw moment have the same sign and so ensure that the aerostat is in a stable tracking configuration. Meanwhile the VRP also decreases the transmission ratio of commanded yaw rate to commanded lateral velocity, making the aerostat's yaw motion vary slowly during transitional phase, so steady position tracking is obtained

    L1 adaptive fault‑tolerant control of stratospheric airships

    Get PDF
    As the utilization of stratospheric airships becomes more prevalent, ensuring their safe operation becomes crucial. This paper explores the ability of an L1 adaptive controller to maintain fault tolerance in the actuators of a stratospheric airship. L1 adaptive control offers fast adaptation while separating adaptation and robustness. This makes the approach a suitable candidate for fault-tolerant control. The performance of the proposed design is compared to the Linear Quadratic Integral and Adaptive Sliding Mode Backstepping controllers. Simulation results show that the robustness of the airship model against faults is improved with the use of the L1 adaptive controller

    Backstepping sliding-mode control of stratospheric airships using disturbance-observer

    Get PDF
    In the presence of unknown disturbances and model parameter uncertainties, this paper develop a nonlinear backstepping sliding-mode controller (BSMC) for trajectory tracking control of a stratospheric airship using a disturbance-observer (DO). Compared with the conventional sliding mode surface (SMS) constructed by a linear combination of the errors, the new SMS manifold is selected as the last back-step error to improve independence of the adjustment of the controller gains. Furthermore, a nonlinear disturbance-observer is designed to process unknown disturbance inputs and improve the BSMC performances. The closed-loop system of trajectory tracking control plant is proved to be globally asymptotically stable by using Lyapunov theory. By comparing with traditional backstepping control and SMC design, the results obtained demonstrate the capacity of the airship to execute a realistic trajectory tracking mission, even in the presence of unknown disturbances, and aerodynamic coefficient uncertaintie

    Design of Flight Control Laws for a Novel Stratospheric Dual-Aircraft Platform

    Get PDF
    Dual-aircraft platform (DAP) is a novel concept that features two glider-like unmanned aerial systems (UAS) tethered via a thin adjustable cable allowing them to sail back-and-forth, without propulsion, using vertical wind shear. DAP offers the potential of a low-cost atmospheric satellite. This thesis presents the results of an initiative to demonstrate this novel flight concept through modeling, simulation, and flight testing at Embry-Riddle Aeronautical University (ERAU). A realistic simulation environment, described herein, was developed to support the development and testing of flight control systems. This environment includes nonlinear aerodynamic models for the aircraft, a multi-element cable dynamics model, propeller-motor thrust model, control surface actuator models, and permits time-varying wind profiles. This simulator offers both pilot-in-the-loop control and autonomous sailing flight control, and X-Plane interface to provide visualization cues. An intensive flight test program, described herein, was conducted to support the validation of the DAP concept. MAXA Pro 4m gliders were assembled, instrumented, and flight tested in an effort to physically demonstrate the sailing mode of flight. The flight test program described here focuses on the capability to sail with one aircraft (i.e., fly without propulsion) while towing (i.e., pulling) a moving truck as an intermediate step towards the more complex scenario of sailing with two connected aircraft. Two vital elements of the flight software are implemented and analyzed herein. The accuracy of wind estimation techniques is evaluated using flight testing. The robustness of an L1 adaptive controller is evaluated within the flight simulation environment by comparing its performance with a conventional controller

    RBF-based supervisor path following control for ASV with time-varying ocean disturbance

    Get PDF
    1028-1036A robust model-free path following controller is developed for autonomous surface vehicle (ASV) with time-varying ocean disturbance. First, the geometrical relationship between ASV and virtual tracking point on the reference path is investigated. The differentiations of tracking errors are described with the relative motion method, which greatly simplified the direct differential of tracking errors. Furthermore, the control law for the desired angular velocity of the vehicle and virtual tracking point are built based on the Lyapunov theory. Second, the traditional proportional-integral-derivative (PID) controller is developed based on the desired velocities and state feedback. The radial basic function (RBF) neural network taking as inputs the desired surge velocity and yaw angular velocity is developed as the supervisor to PID controller. Besides, RBF controller tunes weights according to the output errors between the PID controller and supervisor controller, based on the gradient descent method. Hence, PID controller and RBF supervisor controller act as feedback and feed forward control of the system, respectively. Finally, comparative path following simulation for straight path and sine path illustrate the performance of the proposed supervisor control system. The PID controller term reports loss of control even in the unknown disturbance

    Aeronautical Engineering: A special bibliography with indexes, supplement 48

    Get PDF
    This special bibliography lists 291 reports, articles, and other documents introduced into the NASA scientific and technical information system in August 1974

    Aeronautical engineering: A special bibliography, supplement 44

    Get PDF
    This special bibliography lists 249 reports, articles, and other documents introduced into the NASA scientific and technical information system in April 1974

    Aeronautical Engineering. A continuing bibliography, supplement 115

    Get PDF
    This bibliography lists 273 reports, articles, and other documents introduced into the NASA scientific and technical information system in October 1979
    corecore