Performance enhancement for full-duplex relaying with time-switching-based SWIPT in wireless sensors networks

Full-duplex (FD) with simultaneous wireless information and power transfer (SWIPT) in wireless ad hoc networks has received increased attention as a technology for improving spectrum and energy efficiency. This paper studies the outage performance for a SWIPT-based decode-and-forward (DF) FD relaying network consisting of a single-antenna source S, a two-antenna relay R, and a multi-antenna destination D. Specifically, we propose four protocols, namely static time-switching factor with selection combining (STSF-SC), static time-switching factor with maximal ratio combining (STSF-MRC), optimal dynamic time-switching factor with selection combining (ODTSF-SC), and optimal dynamic time-switching factor with maximal ratio combining (ODTSF-MRC) to fully investigate the outage performance of the proposed system. In particular, the optimal time-switching factor from the ODTSF-SC and ODTSF-MRC methods is designed to maximize the total received data at the destination. In this context, we derive exact closed-formed expressions for all schemes in terms of the outage probability (OP). Finally, the Monte Carlo simulations are conducted to corroborate the theoretical analysis's correctness and the proposed schemes' effectiveness.Web of Science2111art. no. 384

Performance Enhancement for Full-Duplex Relaying with Time-Switching-Based SWIPT in Wireless Sensors Networks

Full-duplex (FD) with simultaneous wireless information and power transfer (SWIPT) in wireless ad hoc networks has received increased attention as a technology for improving spectrum and energy efficiency. This paper studies the outage performance for a SWIPT-based decode-and-forward (DF) FD relaying network consisting of a single-antenna source S, a two-antenna relay R, and a multi-antenna destination D. Specifically, we propose four protocols, namely static time-switching factor with selection combining (STSF-SC), static time-switching factor with maximal ratio combining (STSF-MRC), optimal dynamic time-switching factor with selection combining (ODTSF-SC), and optimal dynamic time-switching factor with maximal ratio combining (ODTSF-MRC) to fully investigate the outage performance of the proposed system. In particular, the optimal time-switching factor from the ODTSF-SC and ODTSF-MRC methods is designed to maximize the total received data at the destination. In this context, we derive exact closed-formed expressions for all schemes in terms of the outage probability (OP). Finally, the Monte Carlo simulations are conducted to corroborate the theoretical analysis’s correctness and the proposed schemes’ effectiveness

Performance Enhancement for Full-Duplex Relaying with Time-Switching-Based SWIPT in Wireless Sensors Networks

Full-duplex (FD) with simultaneous wireless information and power transfer (SWIPT) in wireless ad hoc networks has received increased attention as a technology for improving spectrum and energy efficiency. This paper studies the outage performance for a SWIPT-based decode-andforward (DF) FD relaying network consisting of a single-antenna source S, a two-antenna relay R, and a multi-antenna destination D. Specifically, we propose four protocols, namely static timeswitching factor with selection combining (STSF-SC), static time-switching factor with maximal ratio combining (STSF-MRC), optimal dynamic time-switching factor with selection combining (ODTSFSC), and optimal dynamic time-switching factor with maximal ratio combining (ODTSF-MRC) to fully investigate the outage performance of the proposed system. In particular, the optimal timeswitching factor from the ODTSF-SC and ODTSF-MRC methods is designed to maximize the total received data at the destination. In this context, we derive exact closed-formed expressions for all schemes in terms of the outage probability (OP). Finally, the Monte Carlo simulations are conducted to corroborate the theoretical analysis’s correctness and the proposed schemes’ effectiveness

Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed

Data Collection in Two-Tier IoT Networks with Radio Frequency (RF) Energy Harvesting Devices and Tags

The Internet of things (IoT) is expected to connect physical objects and end-users using technologies such as wireless sensor networks and radio frequency identification (RFID). In addition, it will employ a wireless multi-hop backhaul to transfer data collected by a myriad of devices to users or applications such as digital twins operating in a Metaverse. A critical issue is that the number of packets collected and transferred to the Internet is bounded by limited network resources such as bandwidth and energy. In this respect, IoT networks have adopted technologies such as time division multiple access (TDMA), signal interference cancellation (SIC) and multiple-input multiple-output (MIMO) in order to increase network capacity. Another fundamental issue is energy. To this end, researchers have exploited radio frequency (RF) energy-harvesting technologies to prolong the lifetime of energy constrained sensors and smart devices. Specifically, devices with RF energy harvesting capabilities can rely on ambient RF sources such as access points, television towers, and base stations. Further, an operator may deploy dedicated power beacons that serve as RF-energy sources. Apart from that, in order to reduce energy consumption, devices can adopt ambient backscattering communication technologies. Advantageously, backscattering allows devices to communicate using negligible amount of energy by modulating ambient RF signals. To address the aforementioned issues, this thesis first considers data collection in a two-tier MIMO ambient RF energy-harvesting network. The first tier consists of routers with MIMO capability and a set of source-destination pairs/flows. The second tier consists of energy harvesting devices that rely on RF transmissions from routers for energy supply. The problem is to determine a minimum-length TDMA link schedule that satisfies the traffic demand of source-destination pairs and energy demand of energy harvesting devices. It formulates the problem as a linear program (LP), and outlines a heuristic to construct transmission sets that are then used by the said LP. In addition, it outlines a new routing metric that considers the energy demand of energy harvesting devices to cope with routing requirements of IoT networks. The simulation results show that the proposed algorithm on average achieves 31.25% shorter schedules as compared to competing schemes. In addition, the said routing metric results in link schedules that are at most 24.75% longer than those computed by the LP

Komunikace na milimetrových vlnách v 5G a dalších sítích: Nové systémové modely a analýza výkonnosti

The dissertation investigates different network models, focusing on three important features for next generation cellular networks with respect to millimeter waves (mmWave) communications: the impact of fading and co-channel interference (CCI), energy efficiency, and spectrum efficiency. To address the first aim, the dissertation contains a study of a non-orthogonal multiple access (NOMA) technique in a multi-hop relay network which uses relays that harvest energy from power beacons (PB). This part derives the exact throughput expressions for NOMA and provides a performance analysis of three different NOMA schemes to determine the optimal parameters for the proposed system’s throughput. A self-learning clustering protocol (SLCP) in which a node learns its neighbor’s information is also proposed for determining the node density and the residual energy used to cluster head (CH) selection and improve energy efficiency, thereby prolonging sensor network lifetime and gaining higher throughput. Second, NOMA provides many opportunities for massive connectivity at lower latencies, but it may also cause co-channel interference by reusing frequencies. CCI and fading play a major role in deciding the quality of the received signal. The dissertation takes into account the presence of η and µ fading channels in a network using NOMA. The closed-form expressions of outage probability (OP) and throughput were derived with perfect successive interference cancellation (SIC) and imperfect SIC. The dissertation also addresses the integration of NOMA into a satellite communications network and evaluates its system performance under the effects of imperfect channel state information (CSI) and CCI. Finally, the dissertation presents a new model for a NOMA-based hybrid satellite-terrestrial relay network (HSTRN) using mmWave communications. The satellite deploys the NOMA scheme, whereas the ground relays are equipped with multiple antennas and employ the amplify and forward (AF) protocol. The rain attenuation coefficient is considered as the fading factor of the mmWave band to choose the best relay, and the widely applied hybrid shadowed-Rician and Nakagami-m channels characterize the transmission environment of HSTRN. The closed-form formulas for OP and ergodic capacity (EC) were derived to evaluate the system performance of the proposed model and then verified with Monte Carlo simulations.Dizertační práce zkoumala různé modely sítí a zaměřila se na tři důležité vlastnosti pro buňkové sítě příští generace s ohledem na mmW komunikace, kterými jsou: vliv útlumu a mezikanálového rušení (CCI), energetická účinnost a účinnost spektra. Co se týče prvního cíle, dizertace obsahuje studii techniky neortogonálního vícenásobného přístupu (NOMA) v bezdrátové multiskokové relay síti využívající získávání energie, kde relay uzly sbírají energii z energetických majáků (PB). Tato část přináší přesné výrazy propustnosti pro NOMA a analýzu výkonnosti se třemi různými schématy NOMA s cílem určit optimální parametry pro propustnost navrženého systému. Dále byl navržen samoučící se shlukovací protokol (SLCP), ve kterém se uzel učí informace o sousedech, aby určil hustotu uzlů a zbytkovou energii použitou k výběru hlavy shluku CH pro zlepšení energetické účinnosti, čímž může prodloužit životnost sensorové sítě a zvýšit propustnost. Za druhé, přístup NOMA poskytl mnoho příležitostí pro masivní připojení s nižší latencí, NOMA však může způsobovat mezikanálové rušení v důsledku opětovného využívání kmitočtů. CCI a útlum hrají klíčovou roli při rozhodování o kvalitě přijímaného signálu. V této dizertace je brána v úvahu přítomnost η a µ útlumových kanálů v síti užívající NOMA. Odvozeny jsou výrazy v uzavřené formě pro pravděpodobnost výpadku (OP) a propustnost s dokonalým postupným rušením rušení (SIC) a nedokonalým SIC. Dále se dizertace zabývá integrací přístupu NOMA do satelitní komunikační sítě a vyhodnocuje výkonnost systému při dopadech nedokonalé informace o stavu kanálu (CSI) a CCI. Závěrem disertační práce představuje nový model pro hybridní družicově-terestriální přenosovou síť (HSTRN) založenou na NOMA vícenásobném přístupu využívající mmWave komunikaci. Satelit využívá NOMA schéma, zatímco pozemní relay uzly jsou vybaveny více anténami a aplikují protokol zesilování a předávání (AF). Je zaveden srážkový koeficient, který je uvažován jako útlumový faktor mmWave pásma při výběru nejlepšího relay uzlu. Samotné přenosové prostředí HSTRN je charakterizováno pomocí hybridních Rician a Nakagami-m kanálů. Vztahy pro vyhodnocení výkonnosti systému navrženého modelu vyjadřující ergodickou kapacitu (EC) a pravděpodobnost ztrát (OP) byly odvozeny v uzavřené formě a následně ověřeny pomocí simulační numerické metody Monte Carlo.440 - Katedra telekomunikační technikyvyhově

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin