Low Complexity Adaptive Noise Canceller for Mobile Phones Based Remote Health Monitoring

Mobile phones are gaining acceptance to become an effective tool for remote health monitoring. On one hand, during electrocardiographic (ECG) recording, the presence of various forms of noise is inevitable. On the other hand, algorithms for adaptive noise cancellation must be shared by limited computational power offered by the mobile phones. This paper describes a new adaptive noise canceller scheme, with low computational complexity, for simultaneous cancellation of various forms of noise in ECG signal. The proposed scheme is comprised of two stages. The first stage uses an adaptive notch filters, which are used to eliminate power-line interference from the primary and reference input signals, whereas the other noises are reduced using modified LMS algorithm in the second stage. Low power consumption and lower silicon area are key issues in mobile phones based adaptive noise cancellation. The reduction in complexity is obtained by using log-log LMS algorithm for updating adaptive filters in the proposed scheme. A comprehensive complexity and performance analysis between the proposed and traditional schemes are provided.DOI:http://dx.doi.org/10.11591/ijece.v4i3.553

Extracting fetal heart beats from maternal abdominal recordings: Selection of the optimal principal components

This study presents a systematic comparison of different approaches to the automated selection of the principal components (PC) which optimise the detection of maternal and fetal heart beats from non-invasive maternal abdominal recordings. A public database of 75 4-channel non-invasive maternal abdominal recordings was used for training the algorithm. Four methods were developed and assessed to determine the optimal PC: (1) power spectral distribution, (2) root mean square, (3) sample entropy, and (4) QRS template. The sensitivity of the performance of the algorithm to large-amplitude noise removal (by wavelet de-noising) and maternal beat cancellation methods were also assessed. The accuracy of maternal and fetal beat detection was assessed against reference annotations and quantified using the detection accuracy score F1 [2*PPV*Se / (PPV + Se)], sensitivity (Se), and positive predictive value (PPV). The best performing implementation was assessed on a test dataset of 100 recordings and the agreement between the computed and the reference fetal heart rate (fHR) and fetal RR (fRR) time series quantified. The best performance for detecting maternal beats (F1 99.3%, Se 99.0%, PPV 99.7%) was obtained when using the QRS template method to select the optimal maternal PC and applying wavelet de-noising. The best performance for detecting fetal beats (F1 89.8%, Se 89.3%, PPV 90.5%) was obtained when the optimal fetal PC was selected using the sample entropy method and utilising a fixed-length time window for the cancellation of the maternal beats. The performance on the test dataset was 142.7 beats2/min2 for fHR and 19.9 ms for fRR, ranking respectively 14 and 17 (out of 29) when compared to the other algorithms presented at the Physionet Challenge 2013

Modified Variational Mode Decomposition for Power Line Interference Removal in ECG Signals

Power line interferences (PLI) occurring at 50/60 Hz can corrupt the biomedical recordings like ECG signals and which leads to an improper diagnosis of disease conditions. Proper interference cancellation techniques are therefore required for the removal of these power line disturbances from biomedical recordings. The non-linear time varying characteristics of biomedical signals make the interference removal a difficult task without compromising the actual signal characteristics. In this paper, a modified variational mode decomposition based approach is proposed for PLI removal from the ECG signals. In this approach, the central frequency of an intrinsic mode function is fixed corresponding to the normalized power line disturbance frequency. The experimental results show that the PLI interference is exactly captured both in magnitude and phase and are removed. The proposed approach is experimented with ECG signal records from MIT-BIH Arrhythmia database and compared with traditional notch filtering

Electrocardiogram Baseline Wander Suppression Based on the Combination of Morphological and Wavelet Transformation Based Filtering

One of the major noise components in electrocardiogram (ECG) is the baseline wander (BW). Effective methods for suppressing BW include the wavelet-based (WT) and the mathematical morphological filtering-based (MMF)algorithms. However, the T waveform distortions introduced by the WTand the rectangular/trapezoidal distortions introduced by MMF degrade the quality of the output signal. Hence, in this study, we introduce a method by combining the MMF and WTto overcome the shortcomings of both existing methods. To demonstrate the effectiveness of the proposed method, artificial ECG signals containing a clinicalBW are used for numerical simulation, and we also create a realistic model of baseline wander to compare the proposed method with other state-of-the-art methods commonly used in the literature. /e results show that the BW suppression effect of the proposed method is better than that of the others. Also, the new method is capable of preserving the outline of the BW and avoiding waveform distortions caused by the morphology filter, thereby obtaining an enhanced quality of ECG

Mathematical tools for identifying the fetal response to physical exercise during pregnancy

In the applied mathematics literature there exist a significant number of tools that can reveal the interaction between mother and fetus during rest and also during and after exercise. These tools are based on techniques from a number of areas such as signal processing, time series analysis, neural networks, heart rate variability as well as dynamical systems and chaos. We will briefly review here some of these methods, concentrating on a method of extracting the fetal heart rate from the mixed maternal-fetal heart rate signal, that is based on phase space reconstructio

A STUDY OF POWER LINE INTERFERENCE CANCELLATION USING IIR, AAPTIVE AND WAVELET FILTERING IN ECG

Background: It is essential to reduce these disturbances in ECG signal to improve accuracy and reliability. The bandwidth of the noise overlaps that of wanted signals, so that simple filtering cannot sufficiently enhance the signal to noise ratio. The present paper deals with the digital filtering method to reduce 50 Hz power line noise artifacts in the ECG signal. 4th order Butterworth notch filters(BW=.5 Hz) is used to reduce 50 Hz power line noise interference(PLI) from ECG signals and its performance is compared with Adaptve filters. Method: ECG signal is taken from physionet database. ECG signal (with PLI noise of different frequencies) were processed by Butterworth notch filters of bandwidths of 0.5 Hz. Ringing Artifact is observed in the output. ECG signal (with PLI noise of different frequencies) were processed by Adaptive filters no ringing effect seen. Wavelet filtering applied clean ECG were observed. Result: Performance is compared based on SNR and MSE of Butterworth notch filter and adaptive filters and output of wallet filtering were observed. Conclusion: RLS adaptive filter give better performance as compared to IIR Butterworth and LMS. Clean ECG were seen when filtering using symlet8 wavelet was done

CANCELLATION OF MOTION ARTIFACT NOISE AND POWER LINE INTERFERENCE IN ECG USING ADAPTIVE FILTERS

Background: The electrocardiogram(ECG) has the considerable diagnostic significance, and applications of ECG monitoring are diverse and in wide use. Noises that commonly disturb the basic electrocardiogram are power line interference(PLI), instrumentation noise, external electromagnetic field interference, noise due to random body movements and respiration movements. These noises can be classified according to their frequency content. It is essential to reduce these disturbances in ECG signal to improve accuracy and reliability. The bandwidth of the noise overlaps that of wanted signals, so that simple filtering cannot sufficiently enhance the signal to noise ratio. It is difficult to apply filters with fixed filter co-efficients to reduce these noise. Adaptive filter technique is required to overcome this problem as the filter coefficients can be varied to track the dynamic variations of the signals. Adaptive filter based on the least mean square (LMS) algorithm and recursive least squares (RLS) algorithm are applied to noisy ECG to reduce 50 Hz power line noise and motion artifact noise. Method: ECG signal is taken from physionet database. A ECG signal (without noise) was mixed with constant 0.1 mVp-p 50 Hz interference and motion artifact noise processed with Adaptive filter based on the least mean square (LMS) algorithm and recursive least squares (RLS) algorithm. Simulation results are also shown. Performance of filters are analyzed based on SNR and MSE

Removal of multiple artifacts from ECG signal using cascaded multistage adaptive noise cancellers

Although cascaded multistage adaptive noise cancellers have been employed before by researchers for multiple artifact removal from the ElectroCardioGram (ECG) signal, they all used the same adaptive algorithm in all the cascaded multi-stages for adjusting the adaptive filter weights. In this paper, we propose a cascaded 4-stage adaptive noise canceller for the removal of four artifacts present in the ECG signal, viz. baseline wander, motion artifacts, muscle artifacts, and 60 Hz Power Line Interference (PLI). We have investigated the performance of eight adaptive algorithms, viz. Least Mean Square (LMS), Least Mean Fourth (LMF), Least Mean Mixed-Norm (LMMN), Sign Regressor Least Mean Square (SRLMS), Sign Error Least Mean Square (SELMS), Sign-Sign Least Mean Square (SSLMS), Sign Regressor Least Mean Fourth (SRLMF), and Sign Regressor Least Mean Mixed-Norm (SRLMMN) in terms of Signal-to-Noise Ratio (SNR) improvement for removing the aforementioned four artifacts from the ECG signal. We employed the LMMN, LMF, LMMN, LMF algorithms in the proposed cascaded 4-stage adaptive noise canceller to remove the respective ECG artifacts as mentioned above. We succeeded in achieving an SNR improvement of 12.7319 dBs. The proposed cascaded 4-stage adaptive noise canceller employing the LMMN, LMF, LMMN, LMF algorithms outperforms those that employ the same algorithm in the four stages. One unique and powerful feature of our proposed cascaded 4-stage adaptive noise canceller is that it employs only those adaptive algorithms in the four stages, which are shown to be effective in removing the respective ECG artifacts as mentioned above. Such a scheme has not been investigated before in the literature

Removal of Power Line Interference from Electrocardiograph (ECG) using Proposed Adaptive Filter Algorithm

ECG signals in measurements are contaminated by noises including power line interference. In recent years, adaptive filters with different approaches have been investigated to remove power line interference in ECG.In this paper, an adaptive filter is proposed to cancel power line interference in ECG signals. The proposed algorithm is experimented with MIT-BIH ECG signals data base. The algorithm2019;s results are compared with the results of other adaptive filter algorithms using Least Mean Square (LMS), Normalized Least Mean Square (NLMS) by Signal to Noise (SNR). Theses works are performed by LabVIEW software