Modified PSO based PID Sliding Mode Control using Improved Reaching Law for Nonlinear systems

In this paper, a new model based nonlinear control technique, called PID (Proportional-Integral-Derivative) type sliding surface based sliding mode control is designed using improved reaching law. To improve the performance of the second order nonlinear differential equations with unknown parameters modified particle swarm intelligent optimization (MPSO) is used for the optimized parameters. This paper throws light on the sliding surface design, on the proposed power rate exponential reaching law, parameters optimization using modified particle swarm optimization and highlights the important features of adding an integral term in the sliding mode such as robustness and higher convergence, through extensive mathematical modeling. Siding mode control law is derived using Lyapunov stability approach and its asymptotic stability is proved mathematically and simulations showing its validity. MPSO PID-type Sliding mode control will stabilize the highly nonlinear systems, will compensate disturbances and uncertainty and reduces tracking errors. Simulations and experimental application is done on the non-linear systems and are presented to make a quantitative comparison.Comment: arXiv admin note: substantial text overlap with arXiv:2207.1112

Design of Sliding Mode PID Controller with Improved reaching laws for Nonlinear Systems

In this thesis, advanced design technique in sliding mode control (SMC) is presented with focus on PID (Proportional-Integral-Derivative) type Sliding surfaces based Sliding mode control with improved power rate exponential reaching law for Non-linear systems using Modified Particle Swarm Optimization (MPSO). To handle large non-linearities directly, sliding mode controller based on PID-type sliding surface has been designed in this work, where Integral term ensures fast finite convergence time. The controller parameter for various modified structures can be estimated using Modified PSO, which is used as an offline optimization technique. Various reaching law were implemented leading to the proposed improved exponential power rate reaching law, which also improves the finite convergence time. To implement the proposed algorithm, nonlinear mathematical model has to be decrypted without linearizing, and used for the simulation purposes. Their performance is studied using simulations to prove the proposed behavior. The problem of chattering has been overcome by using boundary method and also second order sliding mode method. PI-type sliding surface based second order sliding mode controller with PD surface based SMC compensation is also proposed and implemented. The proposed algorithms have been analyzed using Lyapunov stability criteria. The robustness of the method is provided using simulation results including disturbance and 10% variation in system parameters. Finally process control based hardware is implemented (conical tank system)

Stabilizing control of two-wheeled wheelchair with movable payload using optimized interval type-2 fuzzy logic

The control schemes of a wheelchair having two wheels with movable payload utilizing the concept of a double-link inverted pendulum have been investigated in this article. The proposed wheelchair has been simulated using SimWise 4D software considering the most efficient parameters. These parameters are extracted using the spiral dynamic algorithm while being controlled with interval type-2 fuzzy logic controller (IT2FLC). The robustness and stability of the implemented controller are assessed under different situations including standing upright, forward motion and application of varying directions and magnitudes of outer disturbances to movable (up and down) system payload. It is shown that the two-wheeled wheelchair adopted by the newly introduced controller has achieved a 94% drop in torque for both Link1 and Link2 and more than 98% fall in distance travelled in comparison with fuzzy logic control type-1 (FLCT1) controller employed in an earlier design. The present study has further considered the increased nonlinearity and complexity of the additional moving payload. From the outcome of this study, it is obvious that the proposed IT2FLC-spiral dynamic algorithm demonstrates better performance than FLCT1 to manage the uncertainties and nonlinearities in case of a movable payload two-wheel wheelchair system

On Stabilization of Cart-Inverted Pendulum System: An Experimental Study

The Cart-Inverted Pendulum System (CIPS) is a classical benchmark control problem. Its dynamics resembles with that of many real world systems of interest like missile launchers, pendubots, human walking and segways and many more. The control of this system is challenging as it is highly unstable, highly non-linear, non-minimum phase system and underactuated. Further, the physical constraints on the track position control voltage etc. also pose complexity in its control design. The thesis begins with the description of the CIPS together with hardware setup used for research, its dynamics in state space and transfer function models. In the past, a lot of research work has been directed to develop control strategies for CIPS. But, very little work has been done to validate the developed design through experiments. Also robustness margins of the developed methods have not been analysed. Thus, there lies an ample opportunity to develop controllers and study the cart-inverted pendulum controlled system in real-time. The objective of this present work is to stabilize the unstable CIPS within the different physical constraints such as in track length and control voltage. Also, simultaneously ensure good robustness. A systematic iterative method for the state feedback design by choosing weighting matrices key to the Linear Quadratic Regulator (LQR) design is presented. But, this yields oscillations in cart position. The Two-Loop-PID controller yields good robustness, and superior cart responses. A sub-optimal LQR based state feedback subjected to H∞ constraints through Linear Matrix Inequalities (LMIs) is solved and it is observed from the obtained results that a good stabilization result is achieved. Non-linear cart friction is identified using an exponential cart friction and is modeled as a plant matrix uncertainty. It has been observed that modeling the cart friction as above has led to improved cart response. Subsequently an integral sliding mode controller has been designed for the CIPS. From the obtained simulation and experiments it is seen that the ISM yields good robustness towards the output channel gain perturbations. The efficacies of the developed techniques are tested both in simulation and experimentation. It has been also observed that the Two-Loop PID Controller yields overall satisfactory response in terms of superior cart position and robustness. In the event of sensor fault the ISM yields best performance out of all the techniques

Visual Feedback Stabilisation of a Cart Inverted Pendulum A

Vision-based object stabilisation is an exciting and challenging area of research, and is one that promises great technical advancements in the field of computer vision. As humans, we are capable of a tremendous array of skilful interactions, particularly when balancing unstable objects that have complex, non-linear dynamics. These complex dynamics impose a difficult control problem, since the object must be stabilised through collaboration between applied forces and vision-based feedback. To coordinate our actions and facilitate delivery of precise amounts of muscle torque, we primarily use our eyes to provide feedback in a closed-loop control scheme. This ability to control an inherently unstable object by vision-only feedback demonstrates an exceptionally high degree of voluntary motor skill. Despite the pervasiveness of vision-based stabilisation in humans and animals, relatively little is known about the neural strategies used to achieve this task. In the last few decades, with advancements in technology, we have tried to impart the skill of vision-based object stabilisation to machines, with varying degrees of success. Within the context of this research, we continue this pursuit by employing the classic Cart Inverted Pendulum; an inherently unstable, non-linear system to investigate dynamic object balancing by vision-only feedback. The Inverted Pendulum is considered to be one of the most fundamental benchmark systems in control theory; as a platform, it provides us with a strong, well established test bed for this research. We seek to discover what strategies are used to stabilise the Cart Inverted Pendulum, and to determine if these strategies can be deployed in Real-Time, using cost-effective solutions. The thesis confronts, and overcomes the problems imposed by low-bandwidth USB cameras; such as poor colour-balance, image noise and low frame rates etc., to successfully achieve vision-based stabilisation. The thesis presents a comprehensive vision-based control system that is capable of balancing an inverted pendulum with a resting oscillation of approximately ±1º. We employ a novel, segment-based location and tracking algorithm, which was found to have excellent noise immunity and enhanced robustness. We successfully demonstrate the resilience of the tracking and pose estimation algorithm against visual disturbances in Real-Time, and with minimal recovery delay. The algorithm was evaluated against peer reviewed research; in terms of processing time, amplitude of oscillation, measurement accuracy and resting oscillation. For each key performance indicator, our system was found to be superior in many cases to that found in the literature. The thesis also delivers a complete test software environment, where vision-based algorithms can be evaluated. This environment includes a flexible tracking model generator to allow customisation of visual markers used by the system. We conclude by successfully performing off-line optimization of our method by means of Artificial Neural Networks, to achieve a significant improvement in angle measurement accuracy.Goodrich Engine Control Systems and Balfour Beatty Rail Technologie

Bio-inspired robotic control in underactuation: principles for energy efficacy, dynamic compliance interactions and adaptability.

Biological systems achieve energy efficient and adaptive behaviours through extensive autologous and exogenous compliant interactions. Active dynamic compliances are created and enhanced from musculoskeletal system (joint-space) to external environment (task-space) amongst the underactuated motions. Underactuated systems with viscoelastic property are similar to these biological systems, in that their self-organisation and overall tasks must be achieved by coordinating the subsystems and dynamically interacting with the environment. One important question to raise is: How can we design control systems to achieve efficient locomotion, while adapt to dynamic conditions as the living systems do? In this thesis, a trajectory planning algorithm is developed for underactuated microrobotic systems with bio-inspired self-propulsion and viscoelastic property to achieve synchronized motion in an energy efficient, adaptive and analysable manner. The geometry of the state space of the systems is explicitly utilized, such that a synchronization of the generalized coordinates is achieved in terms of geometric relations along the desired motion trajectory. As a result, the internal dynamics complexity is sufficiently reduced, the dynamic couplings are explicitly characterised, and then the underactuated dynamics are projected onto a hyper-manifold. Following such a reduction and characterization, we arrive at mappings of system compliance and integrable second-order dynamics with the passive degrees of freedom. As such, the issue of trajectory planning is converted into convenient nonlinear geometric analysis and optimal trajectory parameterization. Solutions of the reduced dynamics and the geometric relations can be obtained through an optimal motion trajectory generator. Theoretical background of the proposed approach is presented with rigorous analysis and developed in detail for a particular example. Experimental studies are conducted to verify the effectiveness of the proposed method. Towards compliance interactions with the environment, accurate modelling or prediction of nonlinear friction forces is a nontrivial whilst challenging task. Frictional instabilities are typically required to be eliminated or compensated through efficiently designed controllers. In this work, a prediction and analysis framework is designed for the self-propelled vibro-driven system, whose locomotion greatly relies on the dynamic interactions with the nonlinear frictions. This thesis proposes a combined physics-based and analytical-based approach, in a manner that non-reversible characteristic for static friction, presliding as well as pure sliding regimes are revealed, and the frictional limit boundaries are identified. Nonlinear dynamic analysis and simulation results demonstrate good captions of experimentally observed frictional characteristics, quenching of friction-induced vibrations and satisfaction of energy requirements. The thesis also performs elaborative studies on trajectory tracking. Control schemes are designed and extended for a class of underactuated systems with concrete considerations on uncertainties and disturbances. They include a collocated partial feedback control scheme, and an adaptive variable structure control scheme with an elaborately designed auxiliary control variable. Generically, adaptive control schemes using neural networks are designed to ensure trajectory tracking. Theoretical background of these methods is presented with rigorous analysis and developed in detail for particular examples. The schemes promote the utilization of linear filters in the control input to improve the system robustness. Asymptotic stability and convergence of time-varying reference trajectories for the system dynamics are shown by means of Lyapunov synthesis

Sliding mode control of the reaction wheel pendulum

textThe Reaction Wheel Pendulum (RWP) is an interesting nonlinear system. A prototypical control problem for the RWP is to stabilize it around the upright position starting from the bottom, which is generally divided into at least 2 phases: (1) Swing-up phase: where the pendulum is swung up and moves toward the upright position. (2) Stabilization phase: here, the pendulum is controlled to be balanced around the upright position. Previous studies mainly focused on an energy method in swing-up phase and a linearization method in stabilization phase. However, several limitations exist. The energy method in swing-up mode usually takes a long time to approach the upright position. Moreover, its trajectory is not controlled which prevents further extensions. The linearization method in the stabilization phase, can only work for a very small range of angles around the equilibrium point, limiting its applicability. In this thesis, we took the 2nd order state space model and solved it for a constant torque input generating the family of phase-plane trajectories (see Appendix A). Therefore, we are able to plan the motion of the reaction wheel pendulum in the phase plane and a sliding mode controller may be implemented around these trajectories. The control strategy presented here is divided into three phases. (1) In the swing up phase a switching torque controller is designed to oscillate the pendulum until the system’s energy is enough to drive the system to the upright position. Our approach is more generic than previous approaches; (2) In the catching phase a sliding surface is designed in the phase plane based on the zero torque trajectories, and a 2nd order sliding mode controller is implemented to drive the pendulum moving along the sliding surface, which improves the robustness compared to the previous method in which the controller switches to stabilization mode when it reaches a pre-defined region. (3) In the stabilization phase a 2nd order sliding mode integral controller is used to solve the balancing problem, which has the potential to stabilize the pendulum in a larger angular region when compared to the previous linearization methods. At last we combine the 3 phases together in a combined strategy. Both simulation results and experimental results are shown. The control unit is National Instruments CompactRIO 9014 with NI 9505 module for module driving and NI 9411 module for encoding. The Reaction Wheel Pendulum is built by Quanser Consulting Inc. and placed in UT’s Advanced Mechatronics Lab.Mechanical Engineerin

Climbing and Walking Robots

Nowadays robotics is one of the most dynamic fields of scientific researches. The shift of robotics researches from manufacturing to services applications is clear. During the last decades interest in studying climbing and walking robots has been increased. This increasing interest has been in many areas that most important ones of them are: mechanics, electronics, medical engineering, cybernetics, controls, and computers. Today’s climbing and walking robots are a combination of manipulative, perceptive, communicative, and cognitive abilities and they are capable of performing many tasks in industrial and non- industrial environments. Surveillance, planetary exploration, emergence rescue operations, reconnaissance, petrochemical applications, construction, entertainment, personal services, intervention in severe environments, transportation, medical and etc are some applications from a very diverse application fields of climbing and walking robots. By great progress in this area of robotics it is anticipated that next generation climbing and walking robots will enhance lives and will change the way the human works, thinks and makes decisions. This book presents the state of the art achievments, recent developments, applications and future challenges of climbing and walking robots. These are presented in 24 chapters by authors throughtot the world The book serves as a reference especially for the researchers who are interested in mobile robots. It also is useful for industrial engineers and graduate students in advanced study