2,779 research outputs found
F-8C adaptive flight control extensions
An adaptive concept which combines gain-scheduled control laws with explicit maximum likelihood estimation (MLE) identification to provide the scheduling values is described. The MLE algorithm was improved by incorporating attitude data, estimating gust statistics for setting filter gains, and improving parameter tracking during changing flight conditions. A lateral MLE algorithm was designed to improve true air speed and angle of attack estimates during lateral maneuvers. Relationships between the pitch axis sensors inherent in the MLE design were examined and used for sensor failure detection. Design details and simulation performance are presented for each of the three areas investigated
Sensor redundancy based FDI using an LPV sliding mode observer
This is the author accepted manuscript. The final version is available from IET via the DOI in this record.In this paper, a linear parameter varying (LPV) sliding mode sensor fault detection and isolation (FDI)
scheme is proposed wherein knowledge of the measurement redundancy is utilised to achieve FDI in
multiple channels simultaneously. Such a situation is common in some state-of-the-art aircraft fault
diagnosis systems where information is generally/mainly measured based on triplex redundancy. The
scheme proposed in this paper is based on an LPV sliding mode observer and exploits the so-called
equivalent output error injection signal to create estimates of the measurement faults. In the case of sensor
measurement redundancy, and where there exists a fault free (but unknown) sensor amongst the set of
measurements, the fault reconstruction performance of the observer can be improved by isolating and using
the output error injection signal associated with the fault free redundant sensor. Simulation results using the
RECONFIGURE benchmark model demonstrate the effectiveness of the schemeThis work is supported by the EU Grant (FP7-AAT-2012-314544): RECONFIGUR
Real-Time Machine Learning Based Open Switch Fault Detection and Isolation for Multilevel Multiphase Drives
Due to the rapid proliferation interest of the multiphase machines and their combination with multilevel inverters technology, the demand for high reliability and resilient in the multiphase multilevel drives is increased. High reliability can be achieved by deploying systematic preventive real-time monitoring, robust control, and efficient fault diagnosis strategies. Fault diagnosis, as an indispensable methodology to preserve the seamless post-fault operation, is carried out in consecutive steps; monitoring the observable signals to generate the residuals, evaluating the observations to make a binary decision if any abnormality has occurred, and identifying the characteristics of the abnormalities to locate and isolate the failed components. It is followed by applying an appropriate reconfiguration strategy to ensure that the system can tolerate the failure.
The primary focus of presented dissertation was to address employing computational and machine learning techniques to construct a proficient fault diagnosis scheme in multilevel multiphase drives. First, the data-driven nonlinear model identification/prediction methods are used to form a hybrid fault detection framework, which combines module-level and system-level methods in power converters, to enhance the performance and obtain a rapid real-time detection. Applying suggested nonlinear model predictors along with different systems (conventional two-level inverter and three-level neutral point clamped inverter) result in reducing the detection time to 1% of stator current fundamental period without deploying component-level monitoring equipment. Further, two methods using semi-supervised learning and analytical data mining concepts are presented to isolate the failed component. The semi-supervised fuzzy algorithm is engaged in building the clustering model because the deficient labeled datasets (prior knowledge of the system) leads to degraded performance in supervised clustering. Also, an analytical data mining procedure is presented based on data interpretability that yields two criteria to isolate the failure. A key part of this work also dealt with the discrimination between the post-fault characteristics, which are supposed to carry the data reflecting the fault influence, and the output responses, which are compensated by controllers under closed-loop control strategy. The performance of all designed schemes is evaluated through experiments
Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems
With the increasing digital services demand, performance and power-efficiency
become vital requirements for digital circuits and systems. However, the
enabling CMOS technology scaling has been facing significant challenges of
device uncertainties, such as process, voltage, and temperature variations. To
ensure system reliability, worst-case corner assumptions are usually made in
each design level. However, the over-pessimistic worst-case margin leads to
unnecessary power waste and performance loss as high as 2.2x. Since
optimizations are traditionally confined to each specific level, those safe
margins can hardly be properly exploited.
To tackle the challenge, it is therefore advised in this Ph.D. thesis to
perform a cross-layer optimization for digital signal processing circuits and
systems, to achieve a global balance of power consumption and output quality.
To conclude, the traditional over-pessimistic worst-case approach leads to
huge power waste. In contrast, the adaptive voltage scaling approach saves
power (25% for the CORDIC application) by providing a just-needed supply
voltage. The power saving is maximized (46% for CORDIC) when a more aggressive
voltage over-scaling scheme is applied. These sparsely occurred circuit errors
produced by aggressive voltage over-scaling are mitigated by higher level error
resilient designs. For functions like FFT and CORDIC, smart error mitigation
schemes were proposed to enhance reliability (soft-errors and timing-errors,
respectively). Applications like Massive MIMO systems are robust against lower
level errors, thanks to the intrinsically redundant antennas. This property
makes it applicable to embrace digital hardware that trades quality for power
savings.Comment: 190 page
Redundancy relations and robust failure detection
All failure detection methods are based on the use of redundancy, that is on (possible dynamic) relations among the measured variables. Consequently the robustness of the failure detection process depends to a great degree on the reliability of the redundancy relations given the inevitable presence of model uncertainties. The problem of determining redundancy relations which are optimally robust in a sense which includes the major issues of importance in practical failure detection is addressed. A significant amount of intuition concerning the geometry of robust failure detection is provided
- …