A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Fault Separation Based on An Excitation Operator with Application to a Quadrotor UAV

This paper presents an excitation operator based fault separation architecture for a quadrotor unmanned aerial vehicle (UAV) subject to loss of effectiveness (LoE) faults, actuator aging, and load uncertainty. The actuator fault dynamics is deeply excavated, containing the deep coupling information among the actuator faults, the system states, and control inputs. By explicitly considering the physical constraints and tracking performance, an excitation operator and corresponding integrated state observer are designed to estimate separately actuator fault and load uncertainty. Moreover, a fault separation maneuver and a safety controller are proposed to ensure the tracking performance when the excitation operator is injected. Both comparative simulation and flight experiments have demonstrated the effectiveness of the proposed scheme while maintaining high levels of tracking performance

Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles

With the increasing demand for unmanned aerial vehicles (UAVs) in both military and civilian applications, critical safety issues need to be specially considered in order to make better and wider use of them. UAVs are usually employed to work in hazardous and complex environments, which may seriously threaten the safety and reliability of UAVs. Therefore, the safety and reliability of UAVs are becoming imperative for development of advanced intelligent control systems. The key challenge now is the lack of fully autonomous and reliable control techniques in face of different operation conditions and sophisticated environments. Further development of unmanned aerial vehicle (UAV) control systems is required to be reliable in the presence of system component faults and to be insensitive to model uncertainties and external environmental disturbances. This thesis research aims to design and develop novel control schemes for UAVs with consideration of all the factors that may threaten their safety and reliability. A novel adaptive sliding mode control (SMC) strategy is proposed to accommodate model uncertainties and actuator faults for an unmanned quadrotor helicopter. Compared with the existing adaptive SMC strategies in the literature, the proposed adaptive scheme can tolerate larger actuator faults without stimulating control chattering due to the use of adaptation parameters in both continuous and discontinuous control parts. Furthermore, a fuzzy logic-based boundary layer and a nonlinear disturbance observer are synthesized to further improve the capability of the designed control scheme for tolerating model uncertainties, actuator faults, and unknown external disturbances while preventing overestimation of the adaptive control parameters and suppressing the control chattering effect. Then, a cost-effective fault estimation scheme with a parallel bank of recurrent neural networks (RNNs) is proposed to accurately estimate actuator fault magnitude and an active fault-tolerant control (FTC) framework is established for a closed-loop quadrotor helicopter system. Finally, a reconfigurable control allocation approach is combined with adaptive SMC to achieve the capability of tolerating complete actuator failures with application to a modified octorotor helicopter. The significance of this proposed control scheme is that the stability of the closed-loop system is theoretically guaranteed in the presence of both single and simultaneous actuator faults

Fault-tolerant formation driving mechanism designed for heterogeneous MAVs-UGVs groups

A fault-tolerant method for stabilization and navigation of 3D heterogeneous formations is proposed in this paper. The presented Model Predictive Control (MPC) based approach enables to deploy compact formations of closely cooperating autonomous aerial and ground robots in surveillance scenarios without the necessity of a precise external localization. Instead, the proposed method relies on a top-view visual relative localization provided by the micro aerial vehicles flying above the ground robots and on a simple yet stable visual based navigation using images from an onboard monocular camera. The MPC based schema together with a fault detection and recovery mechanism provide a robust solution applicable in complex environments with static and dynamic obstacles. The core of the proposed leader-follower based formation driving method consists in a representation of the entire 3D formation as a convex hull projected along a desired path that has to be followed by the group. Such an approach provides non-collision solution and respects requirements of the direct visibility between the team members. The uninterrupted visibility is crucial for the employed top-view localization and therefore for the stabilization of the group. The proposed formation driving method and the fault recovery mechanisms are verified by simulations and hardware experiments presented in the paper

Health-aware control of an octorotor UAV system based on actuator reliability

A major goal in modern flight control systems is the need of improving the reliability. This work presents a reliable control approach of an octorotor UAV that allows distributing the control effort among the actuators using health actuator information. The octorotor is an over-actuated system where the redundancy of the actuators allows the redistribution of the control effort among the existing actuators according to a given control strategy. The priority is given to each actuator according to the capabilities and reliability of this actuatorPeer ReviewedPostprint (author's final draft

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version

Mixed active/passive robust fault detection and isolation using set-theoretic unknown input observers

2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksIEEE This paper proposes a robust fault detection and isolation (FDI) approach that combines active and passive robust FDI approaches. Standard active FDI approaches obtain robustness by using the unknown input observer (UIO) to decouple unknown inputs from residuals. Differently, standard passive FDI approaches achieve robustness by using the set theory to bound the effect of uncertain factors (disturbances and noises). In this paper, we combine the UIO-based and the set-based approaches to produce a mixed robust FDI, which can mitigate the disadvantages and exert the advantages of the two robust FDI approaches. In order to emphasize the role of set theory, the UIO design based on the set theory is named as the set-theoretic UIO (SUIO). A quadrotor subsystem is used to illustrate the effectiveness of the proposed FDI approach.Peer ReviewedPostprint (author's final draft

Flight evaluations of sliding mode fault tolerant controllers

This is the author accepted manuscript. The final version is available from the publisher via the DOI in this recordThis paper considers the development of fault tolerant controllers (FTC) and their application to aerospace system. In particular, given the extensive and growing literature in this area, this paper focusses on methods where the schemes have been implemented and flight tested. One thread of the fault tolerant control literature has involved sliding mode controllers. This paper considers a specific class of sliding mode FTC which incorporates control allocation to exploit over-actuation (which is typically present in aerospace systems). The paper describes implementations of these ideas on a small quadrotor UAV and also piloted flight tests on a full-scale twin-engined aircraft