A robust sequential hypothesis testing method for brake squeal localisation

This contribution deals with the in situ detection and localisation of brake squeal in an automobile. As brake squeal is emitted from regions known a priori, i.e., near the wheels, the localisation is treated as a hypothesis testing problem. Distributed microphone arrays, situated under the automobile, are used to capture the directional properties of the sound field generated by a squealing brake. The spatial characteristics of the sampled sound field is then used to formulate the hypothesis tests. However, in contrast to standard hypothesis testing approaches of this kind, the propagation environment is complex and time-varying. Coupled with inaccuracies in the knowledge of the sensor and source positions as well as sensor gain mismatches, modelling the sound field is difficult and standard approaches fail in this case. A previously proposed approach implicitly tried to account for such incomplete system knowledge and was based on ad hoc likelihood formulations. The current paper builds upon this approach and proposes a second approach, based on more solid theoretical foundations, that can systematically account for the model uncertainties. Results from tests in a real setting show that the proposed approach is more consistent than the prior state-of-the-art. In both approaches, the tasks of detection and localisation are decoupled for complexity reasons. The localisation (hypothesis testing) is subject to a prior detection of brake squeal and identification of the squeal frequencies. The approaches used for the detection and identification of squeal frequencies are also presented. The paper, further, briefly addresses some practical issues related to array design and placement. (C) 2019 Author(s)

A room acoustics measurement system using non-invasive microphone arrays

This thesis summarises research into adaptive room correction for small rooms and pre-recorded material, for example music of films. A measurement system to predict the sound at a remote location within a room, without a microphone at that location was investigated. This would allow the sound within a room to be adaptively manipulated to ensure that all listeners received optimum sound, therefore increasing their enjoyment. The solution presented used small microphone arrays, mounted on the room's walls. A unique geometry and processing system was designed, incorporating three processing stages, temporal, spatial and spectral. The temporal processing identifies individual reflection arrival times from the recorded data. Spatial processing estimates the angles of arrival of the reflections so that the three-dimensional coordinates of the reflections' origin can be calculated. The spectral processing then estimates the frequency response of the reflection. These estimates allow a mathematical model of the room to be calculated, based on the acoustic measurements made in the actual room. The model can then be used to predict the sound at different locations within the room. A simulated model of a room was produced to allow fast development of algorithms. Measurements in real rooms were then conducted and analysed to verify the theoretical models developed and to aid further development of the system. Results from these measurements and simulations, for each processing stage are presented

Convolutive Blind Source Separation Methods

In this chapter, we provide an overview of existing algorithms for blind source separation of convolutive audio mixtures. We provide a taxonomy, wherein many of the existing algorithms can be organized, and we present published results from those algorithms that have been applied to real-world audio separation tasks

Spatial Sound Localization via Multipath Euclidean Distance Matrix Recovery

A novel localization approach is proposed in order to find the position of an individual source using recordings of a single microphone in a reverberant enclosure. The multipath propagation is modeled by multiple virtual microphones as images of the actual single microphone and a multipath distance matrix is constructed whose components consist of the squared distances between the pairs of microphones (real or virtual) or the squared distances between the microphones and the source. The distances between the actual and virtual microphones are computed from the geometry of the enclosure. The microphone-source distances correspond to the support of the early reflections in the room impulse response associated with the source signal acquisition. The low-rank property of the Euclidean distance matrix is exploited to identify this correspondence. Source localization is achieved through optimizing the location of the source matching those measurements. The recording time of the microphone and generation of the source signal is asynchronous and estimated via the proposed procedure. Furthermore, a theoretically optimal joint localization and synchronization algorithm is derived by formulating the source localization as minimization of a quartic cost function. It is shown that the global minimum of the proposed cost function can be efficiently computed by converting it to a generalized trust region subproblem. Numerical simulations on synthetic data and real data recordings obtained by practical tests show the effectiveness of the proposed approach

FPGA-based architectures for acoustic beamforming with microphone arrays : trends, challenges and research opportunities

Over the past decades, many systems composed of arrays of microphones have been developed to satisfy the quality demanded by acoustic applications. Such microphone arrays are sound acquisition systems composed of multiple microphones used to sample the sound field with spatial diversity. The relatively recent adoption of Field-Programmable Gate Arrays (FPGAs) to manage the audio data samples and to perform the signal processing operations such as filtering or beamforming has lead to customizable architectures able to satisfy the most demanding computational, power or performance acoustic applications. The presented work provides an overview of the current FPGA-based architectures and how FPGAs are exploited for different acoustic applications. Current trends on the use of this technology, pending challenges and open research opportunities on the use of FPGAs for acoustic applications using microphone arrays are presented and discussed

Advanced algorithms for audio and image processing

The objective of the thesis is the development of a set of innovative algorithms around the topic of beamforming in the field of acoustic imaging, audio and image processing, aimed at significantly improving the performance of devices that exploit these computational approaches. Therefore the context is the improvement of devices (ultrasound machines and video/audio devices) already on the market or the development of new ones which, through the proposed studies, can be introduced on new the markets with the launch of innovative high-tech start-ups. This is the motivation and the leitmotiv behind the doctoral work carried out. In fact, in the first part of the work an innovative image reconstruction algorithm in the field of ultrasound biomedical imaging is presented, which is connected to the development of such equipment that exploits the computing opportunities currently offered nowadays at low cost by GPUs (Moore\u2019s law). The proposed target is to obtain a new pipeline of the reconstruction of the image abandoning the architecture of such hardware based In the first part of the thesis I faced the topic of the reconstruction of ultrasound images for applications hypothesized on a software based device through image reconstruction algorithms processed in the frequency domain. An innovative beamforming algorithm based on seismic migration is presented, in which a transformation of the RF data is carried out and the reconstruction algorithm can evaluate a masking of the k-space of the data, speeding up the reconstruction process and reducing the computational burden. The analysis and development of the algorithms responsible for carrying out the thesis has been approached from a feasibility point in an off-line context and on the Matlab platform, processing both synthetic simulated generated data and real RF data: the subsequent development of these algorithms within of the future ultrasound biomedical equipment will exploit an high-performance computing framework capable of processing customized kernel pipelines (henceforth called \u2019filters\u2019) on CPU/GPU. The type of filters implemented involved the topic of Plane Wave Imaging (PWI), an alternative method of acquiring the ultrasound image compared to the state of the art of the traditional standard B-mode which currently exploit sequential sequence of insonification of the sample under examination through focused beams transmitted by the probe channels. The PWI mode is interesting and opens up new scenarios compared to the usual signal acquisition and processing techniques, with the aim of making signal processing in general and image reconstruction in particular faster and more flexible, and increasing importantly the frame rate opens up and improves clinical applications. The innovative idea is to introduce in an offline seismic reconstruction algorithm for ultrasound imaging a further filter, named masking matrix. The masking matrices can be computed offline knowing the system parameters, since they do not depend from acquired data. Moreover, they can be pre-multiplied to propagation matrices, without affecting the overall computational load. Subsequently in the thesis, the topic of beamforming in audio processing on super-direct linear arrays of microphones is addressed. The aim is to make an in depth analysis of two main families of data-independent approaches and algorithms present in the literature by comparing their performances and the trade-off between directivity and frequency invariance, which is not yet known at to the state-of-the-art. The goal is to validate the best algorithm that allows, from the perspective of an implementation, to experimentally verify performance, correlating it with the characteristics and error statistics. Frequency-invariant beam patterns are often required by systems using an array of sensors to process broadband signals. In some experimental conditions, the array spatial aperture is shorter than the involved wavelengths. In these conditions, superdirective beamforming is essential for an efficient system. I present a comparison between two methods that deal with a data-independent beamformer based on a filter-and-sum structure. Both methods (the first one numerical, the second one analytic) formulate a mathematical convex minimization problem, in which the variables to be optimized are the filters coefficients or frequency responses. In the described simulations, I have chosen a geometry and a set-up of parameters that allows us to make a fair comparison between the performances of the two different design methods analyzed. In particular, I addressed a small linear array for audio capture with different purposes (hearing aids, audio surveillance system, video-conference system, multimedia device, etc.). The research activity carried out has been used for the launch of a high-tech device through an innovative start-up in the field of glasses/audio devices (https://acoesis.com/en/). It has been proven that the proposed algorithm gives the possibility of obtaining higher performances than the state of the art of similar algorithms, additionally providing the possibility of connecting directivity or better generalized directivity to the statistics of phase errors and gain of sensors, extremely important in superdirective arrays in the case of real and industrial implementation. Therefore, the method proposed by the comparison is innovative because it quantitatively links the physical construction characteristics of the array to measurable and experimentally verifiable quantities, making the real implementation process controllable. The third topic faced is the reconstruction of the Room Impluse Response (RIR) using audio processing blind methods. Given an unknown audio source, the estimation of time differences-of-arrivals (TDOAs) can be efficiently and robustly solved using blind channel identification and exploiting the cross-correlation identity (CCI). Prior blind works have improved the estimate of TDOAs by means of different algorithmic solutions and optimization strategies, while always sticking to the case N = 2 microphones. But what if we can obtain a direct improvement in performance by just increasing N? In the fourth Chapter I tried to investigate this direction, showing that, despite the arguable simplicity, this is capable of (sharply) improving upon state-of-the-art blind channel identification methods based on CCI, without modifying the computational pipeline. Inspired by our results, we seek to warm up the community and the practitioners by paving the way (with two concrete, yet preliminary, examples) towards joint approaches in which advances in the optimization are combined with an increased number of microphones, in order to achieve further improvements. Sound source localisation applications can be tackled by inferring the time-difference-of-arrivals (TDOAs) between a sound-emitting source and a set of microphones. Among the referred applications, one can surely list room-aware sound reproduction, room geometry\u2019s estimation, speech enhancement. Despite a broad spectrum of prior works estimate TDOAs from a known audio source, even when the signal emitted from the acoustic source is unknown, TDOAs can be inferred by comparing the signals received at two (or more) spatially separated microphones, using the notion of cross-corrlation identity (CCI). This is the key theoretical tool, not only, to make the ordering of microphones irrelevant during the acquisition stage, but also to solve the problem as blind channel identification, robustly and reliably inferring TDOAs from an unknown audio source. However, when dealing with natural environments, such \u201cmutual agreement\u201d between microphones can be tampered by a variety of audio ambiguities such as ambient noise. Furthermore, each observed signal may contain multiple distorted or delayed replicas of the emitting source due to reflections or generic boundary effects related to the (closed) environment. Thus, robustly estimating TDOAs is surely a challenging problem and CCI-based approaches cast it as single-input/multi-output blind channel identification. Such methods promote robustness in the estimate from the methodological standpoint: using either energy-based regularization, sparsity or positivity constraints, while also pre-conditioning the solution space. Last but not least, the Acoustic Imaging is an imaging modality that exploits the propagation of acoustic waves in a medium to recover the spatial distribution and intensity of sound sources in a given region. Well known and widespread acoustic imaging applications are, for example, sonar and ultrasound. There are active and passive imaging devices: in the context of this thesis I consider a passive imaging system called Dual Cam that does not emit any sound but acquires it from the environment. In an acoustic image each pixel corresponds to the sound intensity of the source, the whose position is described by a particular pair of angles and, in the case in which the beamformer can, as in our case, work in near-field, from a distance on which the system is focused. In the last part of this work I propose the use of a new modality characterized by a richer information content, namely acoustic images, for the sake of audio-visual scene understanding. Each pixel in such images is characterized by a spectral signature, associated to a specific direction in space and obtained by processing the audio signals coming from an array of microphones. By coupling such array with a video camera, we obtain spatio-temporal alignment of acoustic images and video frames. This constitutes a powerful source of self-supervision, which can be exploited in the learning pipeline we are proposing, without resorting to expensive data annotations. However, since 2D planar arrays are cumbersome and not as widespread as ordinary microphones, we propose that the richer information content of acoustic images can be distilled, through a self-supervised learning scheme, into more powerful audio and visual feature representations. The learnt feature representations can then be employed for downstream tasks such as classification and cross-modal retrieval, without the need of a microphone array. To prove that, we introduce a novel multimodal dataset consisting in RGB videos, raw audio signals and acoustic images, aligned in space and synchronized in time. Experimental results demonstrate the validity of our hypothesis and the effectiveness of the proposed pipeline, also when tested for tasks and datasets different from those used for training. Chapter 6 closes the thesis, presenting a development activity of a new Dual Cam POC to build-up from it a spin-off, assuming to apply for an innovation project for hi-tech start- ups (such as a SME instrument H2020) for a 50Keuro grant, following the idea of the technology transfer. A deep analysis of the reference market, technologies and commercial competitors, business model and the FTO of intellectual property is then conducted. Finally, following the latest technological trends (https://www.flir.eu/products/si124/) a new version of the device (planar audio array) with reduced dimensions and improved technical characteristics is simulated, simpler and easier to use than the current one, opening up new interesting possibilities of development not only technical and scientific but also in terms of business fallout

Speech enhancement algorithms for audiological applications

Texto en inglés y resumen en inglés y españolPremio Extraordinario de Doctorado de la UAH en el año académico 2013-2014La mejora de la calidad de la voz es un problema que, aunque ha sido abordado durante muchos años, aún sigue abierto. El creciente auge de aplicaciones tales como los sistemas manos libres o de reconocimiento de voz automático y las cada vez mayores exigencias de las personas con pérdidas auditivas han dado un impulso definitivo a este área de investigación. Esta tesis doctoral se centra en la mejora de la calidad de la voz en aplicaciones audiológicas. La mayoría del trabajo de investigación desarrollado en esta tesis está dirigido a la mejora de la inteligibilidad de la voz en audífonos digitales, teniendo en cuenta las limitaciones de este tipo de dispositivos. La combinación de técnicas de separación de fuentes y filtrado espacial con técnicas de aprendizaje automático y computación evolutiva ha originado novedosos e interesantes algoritmos que son incluidos en esta tesis. La tesis esta dividida en dos grandes bloques. El primer bloque contiene un estudio preliminar del problema y una exhaustiva revisión del estudio del arte sobre algoritmos de mejora de la calidad de la voz, que sirve para definir los objetivos de esta tesis. El segundo bloque contiene la descripción del trabajo de investigación realizado para cumplir los objetivos de la tesis, así como los experimentos y resultados obtenidos. En primer lugar, el problema de mejora de la calidad de la voz es descrito formalmente en el dominio tiempo-frecuencia. Los principales requerimientos y restricciones de los audífonos digitales son definidas. Tras describir el problema, una amplia revisión del estudio del arte ha sido elaborada. La revisión incluye algoritmos de mejora de la calidad de la voz mono-canal y multi-canal, considerando técnicas de reducción de ruido y técnicas de separación de fuentes. Además, la aplicación de estos algoritmos en audífonos digitales es evaluada. El primer problema abordado en la tesis es la separación de fuentes sonoras en mezclas infra-determinadas en el dominio tiempo-frecuencia, sin considerar ningún tipo de restricción computacional. El rendimiento del famoso algoritmo DUET, que consigue separar fuentes de voz con solo dos mezclas, ha sido evaluado en diversos escenarios, incluyendo mezclas lineales y binaurales no reverberantes, mezclas reverberantes, y mezclas de voz con otro tipo de fuentes tales como ruido y música. El estudio revela la falta de robustez del algoritmo DUET, cuyo rendimiento se ve seriamente disminuido en mezclas reverberantes, mezclas binaurales, y mezclas de voz con música y ruido. Con el objetivo de mejorar el rendimiento en estos casos, se presenta un novedoso algoritmo de separación de fuentes que combina la técnica de clustering mean shift con la base del algoritmo DUET. La etapa de clustering del algoritmo DUET, que esta basada en un histograma ponderado, es reemplazada por una modificación del algoritmo mean shift, introduciendo el uso de un kernel Gaussiano ponderado. El análisis de los resultados obtenidos muestran una clara mejora obtenida por el algoritmo propuesto en relación con el algoritmo DUET original y una modificación que usa k-means. Además, el algoritmo propuesto ha sido extendido para usar un array de micrófonos de cualquier tamaño y geometría. A continuación se ha abordado el problema de la enumeración de fuentes de voz, que esta relacionado con el problema de separación de fuentes. Se ha propuesto un novedoso algoritmo basado en un criterio de teoría de la información y en la estimación de los retardos relativos causados por las fuentes entre un par de micrófonos. El algoritmo ha obtenido excelente resultados y muestra robustez en la enumeración de mezclas no reverberantes de hasta 5 fuentes de voz. Además se demuestra la potencia del algoritmo para la enumeración de fuentes en mezclas reverberantes. El resto de la tesis esta centrada en audífonos digitales. El primer problema tratado es el de la mejora de la inteligibilidad de la voz en audífonos monoaurales. En primer lugar, se realiza un estudio de los recursos computacionales disponibles en audífonos digitales de ultima generación. Los resultados de este estudio se han utilizado para limitar el coste computacional de los algoritmos de mejora de la calidad de la voz para audífonos propuestos en esta tesis. Para resolver este primer problema se propone un algoritmo mono-canal de mejora de la calidad de la voz de bajo coste computacional. El objetivo es la estimación de una mascara tiempo-frecuencia continua para obtener el mayor parámetro PESQ de salida. El algoritmo combina una versión generalizada del estimador de mínimos cuadrados con un algoritmo de selección de características a medida, utilizando un novedoso conjunto de características. El algoritmo ha obtenido resultados excelentes incluso con baja relación señal a ruido. El siguiente problema abordado es el diseño de algoritmos de mejora de la calidad de la voz para audífonos binaurales comunicados de forma inalámbrica. Estos sistemas tienen un problema adicional, y es que la conexión inalámbrica aumenta el consumo de potencia. El objetivo en esta tesis es diseñar algoritmos de mejora de la calidad de la voz de bajo coste computacional que incrementen la eficiencia energética en audífonos binaurales comunicados de forma inalámbrica. Se han propuesto dos soluciones. La primera es un algoritmo de extremado bajo coste computacional que maximiza el parámetro WDO y esta basado en la estimación de una mascara binaria mediante un discriminante cuadrático que utiliza los valores ILD e ITD de cada punto tiempo-frecuencia para clasificarlo entre voz o ruido. El segundo algoritmo propuesto, también de bajo coste, utiliza además la información de puntos tiempo-frecuencia vecinos para estimar la IBM mediante una versión generalizada del LS-LDA. Además, se propone utilizar un MSE ponderado para estimar la IBM y maximizar el parámetro WDO al mismo tiempo. En ambos algoritmos se propone un esquema de transmisión eficiente energéticamente, que se basa en cuantificar los valores de amplitud y fase de cada banda de frecuencia con un numero distinto de bits. La distribución de bits entre frecuencias se optimiza mediante técnicas de computación evolutivas. El ultimo trabajo incluido en esta tesis trata del diseño de filtros espaciales para audífonos personalizados a una persona determinada. Los coeficientes del filtro pueden adaptarse a una persona siempre que se conozca su HRTF. Desafortunadamente, esta información no esta disponible cuando un paciente visita el audiólogo, lo que causa perdidas de ganancia y distorsiones. Con este problema en mente, se han propuesto tres métodos para diseñar filtros espaciales que maximicen la ganancia y minimicen las distorsiones medias para un conjunto de HRTFs de diseño

Mathematical modelling ano optimization strategies for acoustic source localization in reverberant environments

La presente Tesis se centra en el uso de técnicas modernas de optimización y de procesamiento de audio para la localización precisa y robusta de personas dentro de un entorno reverberante dotado con agrupaciones (arrays) de micrófonos. En esta tesis se han estudiado diversos aspectos de la localización sonora, incluyendo el modelado, la algoritmia, así como el calibrado previo que permite usar los algoritmos de localización incluso cuando la geometría de los sensores (micrófonos) es desconocida a priori. Las técnicas existentes hasta ahora requerían de un número elevado de micrófonos para obtener una alta precisión en la localización. Sin embargo, durante esta tesis se ha desarrollado un nuevo método que permite una mejora de más del 30\% en la precisión de la localización con un número reducido de micrófonos. La reducción en el número de micrófonos es importante ya que se traduce directamente en una disminución drástica del coste y en un aumento de la versatilidad del sistema final. Adicionalmente, se ha realizado un estudio exhaustivo de los fenómenos que afectan al sistema de adquisición y procesado de la señal, con el objetivo de mejorar el modelo propuesto anteriormente. Dicho estudio profundiza en el conocimiento y modelado del filtrado PHAT (ampliamente utilizado en localización acústica) y de los aspectos que lo hacen especialmente adecuado para localización. Fruto del anterior estudio, y en colaboración con investigadores del instituto IDIAP (Suiza), se ha desarrollado un sistema de auto-calibración de las posiciones de los micrófonos a partir del ruido difuso presente en una sala en silencio. Esta aportación relacionada con los métodos previos basados en la coherencia. Sin embargo es capaz de reducir el ruido atendiendo a parámetros físicos previamente conocidos (distancia máxima entre los micrófonos). Gracias a ello se consigue una mejor precisión utilizando un menor tiempo de cómputo. El conocimiento de los efectos del filtro PHAT ha permitido crear un nuevo modelo que permite la representación 'sparse' del típico escenario de localización. Este tipo de representación se ha demostrado ser muy conveniente para localización, permitiendo un enfoque sencillo del caso en el que existen múltiples fuentes simultáneas. La última aportación de esta tesis, es el de la caracterización de las Matrices TDOA (Time difference of arrival -Diferencia de tiempos de llegada, en castellano-). Este tipo de matrices son especialmente útiles en audio pero no están limitadas a él. Además, este estudio transciende a la localización con sonido ya que propone métodos de reducción de ruido de las medias TDOA basados en una representación matricial 'low-rank', siendo útil, además de en localización, en técnicas tales como el beamforming o el autocalibrado