IMPLEMENTATION OF POWER AND DELAY VARIANT OF A RADIX-10 COMBINATIONAL MULTIPLIER USING MIXED BINARY AND BCD CODE

The decimal multiplication is one of the most important decimal arithmetic operations which have a growing demand in the area of commercial, financial, and scientific computing. It has been revived in recent years due to the large amount of data in commercial applications. In this paper, we propose a parallel decimal multiplication algorithm with three components, which are a partial product generation, a partial product reduction, and a final digit-set conversion. First, a redundant number system is applied to recode not only the multiplier, but also multiples of the multiplicand in signed-digit (SD) numbers. Furthermore, we present a multi operand SD addition algorithm to reduce the partial product array.We consider the problem of multi operand parallel decimal addition with an approach that uses binary arithmetic, suggested by the adoption of binary-coded decimal (BCD) numbers. This involves corrections in order to obtain the BCD result or a binary-to-decimal (BD) conversion. The BD conversion moreover allows an easy alignment of the sums of adjacent columns. We treat the design of BCD digit adders using fast carry-free adders and the conversion problem through a known parallel scheme using elementary conversion cells. Spread sheets have been developed for adding several BCD digits and for simulating the BD conversion as a design tool. In this project Xilinx-ISE tool is used for simulation, logical verification, and further synthesizing

Decimal Floating-point Fused Multiply Add with Redundant Number Systems

The IEEE standard of decimal floating-point arithmetic was officially released in 2008. The new decimal floating-point (DFP) format and arithmetic can be applied to remedy the conversion error caused by representing decimal floating-point numbers in binary floating-point format and to improve the computing performance of the decimal processing in commercial and financial applications. Nowadays, many architectures and algorithms of individual arithmetic functions for decimal floating-point numbers are proposed and investigated (e.g., addition, multiplication, division, and square root). However, because of the less efficiency of representing decimal number in binary devices, the area consumption and performance of the DFP arithmetic units are not comparable with the binary counterparts. IBM proposed a binary fused multiply-add (FMA) function in the POWER series of processors in order to improve the performance of floating-point computations and to reduce the complexity of hardware design in reduced instruction set computing (RISC) systems. Such an instruction also has been approved to be suitable for efficiently implementing not only stand-alone addition and multiplication, but also division, square root, and other transcendental functions. Additionally, unconventional number systems including digit sets and encodings have displayed advantages on performance and area efficiency in many applications of computer arithmetic. In this research, by analyzing the typical binary floating-point FMA designs and the design strategy of unconventional number systems, ``a high performance decimal floating-point fused multiply-add (DFMA) with redundant internal encodings" was proposed. First, the fixed-point components inside the DFMA (i.e., addition and multiplication) were studied and investigated as the basis of the FMA architecture. The specific number systems were also applied to improve the basic decimal fixed-point arithmetic. The superiority of redundant number systems in stand-alone decimal fixed-point addition and multiplication has been proved by the synthesis results. Afterwards, a new DFMA architecture which exploits the specific redundant internal operands was proposed. Overall, the specific number system improved, not only the efficiency of the fixed-point addition and multiplication inside the FMA, but also the architecture and algorithms to build up the FMA itself. The functional division, square root, reciprocal, reciprocal square root, and many other functions, which exploit the Newton's or other similar methods, can benefit from the proposed DFMA architecture. With few necessary on-chip memory devices (e.g., Look-up tables) or even only software routines, these functions can be implemented on the basis of the hardwired FMA function. Therefore, the proposed DFMA can be implemented on chip solely as a key component to reduce the hardware cost. Additionally, our research on the decimal arithmetic with unconventional number systems expands the way of performing other high-performance decimal arithmetic (e.g., stand-alone division and square root) upon the basic binary devices (i.e., AND gate, OR gate, and binary full adder). The proposed techniques are also expected to be helpful to other non-binary based applications

A HIGH PERFORMANCE RADIX10 MULTIPLICATION ARCHITECTURE BASED ON REDUNDANT BCD CODES

The decimal multiplication is one of the most important decimal arithmetic operations which have a growing demand in the area of commercial, financial, and scientific computing. It has been revived in recent years due to the large amount of data in commercial applications. In this paper, we propose a parallel decimal multiplication algorithm with three components, which are a partial product generation, a partial product reduction, and a final digit-set conversion. First, a redundant number system is applied to recode not only the multiplier, but also multiples of the multiplicand in signed-digit (SD) numbers. Furthermore, we present a multi operand SD addition algorithm to reduce the partial product array. We consider the problem of multi operand parallel decimal addition with an approach that uses binary arithmetic, suggested by the adoption of binary-coded decimal (BCD) numbers. This involves corrections in order to obtain the BCD result or a binary-to-decimal (BD) conversion. The BD conversion moreover allows an easy alignment of the sums of adjacent columns. We treat the design of BCD digit adders using fast carry-free adders and the conversion problem through a known parallel scheme using elementary conversion cells. Spread sheets have been developed for adding several BCD digits and for simulating the BD conversion as a design tool. In this project Xilinx-ISE tool is used for simulation, logical verification, and further synthesizing

High Resolution Single-Chip Radix II FFT Processor for High- Tech Application

Electrical motors are vital components of many industrial processes and their operation failure leads losing in production line. Motor functionality and its behavior should be monitored to avoid production failure catastrophe. Hence, a high‐tech DSP processor is a significant method for electrical harmonic analysis that can be realized as embedded systems. This chapter introduces principal embedded design of novel high‐tech 1024‐point FFT processor architecture for high performance harmonic measurement techniques. In FFT processor algorithm pipelining and parallel implementation are incorporated in order to enhance the performance. The proposed FFT makes use of floating point to realize higher precision FFT. Since floating‐point architecture limits the maximum clock frequency and increases the power consumption, the chapter focuses on improving the speed, area, resolution and power consumption, as well as latency for the FFT. It illustrates very large‐scale integration (VLSI) implementation of the floating‐point parallel pipelined (FPP) 1024‐point Radix II FFT processor with applying novel architecture that makes use of only single butterfly incorporation of intelligent controller. The functionality of the conventional Radix II FFT was verified as embedded in FPGA prototyping. For area and power consumption, the proposed Radix II FPP‐FFT was optimized in ASIC under Silterra 0.18 µm and Mimos 0.35 µm technology libraries

Power-Aware Design Methodologies for FPGA-Based Implementation of Video Processing Systems

The increasing capacity and capabilities of FPGA devices in recent years provide an attractive option for performance-hungry applications in the image and video processing domain. FPGA devices are often used as implementation platforms for image and video processing algorithms for real-time applications due to their programmable structure that can exploit inherent spatial and temporal parallelism. While performance and area remain as two main design criteria, power consumption has become an important design goal especially for mobile devices. Reduction in power consumption can be achieved by reducing the supply voltage, capacitances, clock frequency and switching activities in a circuit. Switching activities can be reduced by architectural optimization of the processing cores such as adders, multipliers, multiply and accumulators (MACS), etc. This dissertation research focuses on reducing the switching activities in digital circuits by considering data dependencies in bit level, word level and block level neighborhoods in a video frame. The bit level data neighborhood dependency consideration for power reduction is illustrated in the design of pipelined array, Booth and log-based multipliers. For an array multiplier, operands of the multipliers are partitioned into higher and lower parts so that the probability of the higher order parts being zero or one increases. The gating technique for the pipelined approach deactivates part(s) of the multiplier when the above special values are detected. For the Booth multiplier, the partitioning and gating technique is integrated into the Booth recoding scheme. In addition, a delay correction strategy is developed for the Booth multiplier to reduce the switching activities of the sign extension part in the partial products. A novel architecture design for the computation of log and inverse-log functions for the reduction of power consumption in arithmetic circuits is also presented. This also utilizes the proposed partitioning and gating technique for further dynamic power reduction by reducing the switching activities. The word level and block level data dependencies for reducing the dynamic power consumption are illustrated by presenting the design of a 2-D convolution architecture. Here the similarities of the neighboring pixels in window-based operations of image and video processing algorithms are considered for reduced switching activities. A partitioning and detection mechanism is developed to deactivate the parallel architecture for window-based operations if higher order parts of the pixel values are the same. A neighborhood dependent approach (NDA) is incorporated with different window buffering schemes. Consideration of the symmetry property in filter kernels is also applied with the NDA method for further reduction of switching activities. The proposed design methodologies are implemented and evaluated in a FPGA environment. It is observed that the dynamic power consumption in FPGA-based circuit implementations is significantly reduced in bit level, data level and block level architectures when compared to state-of-the-art design techniques. A specific application for the design of a real-time video processing system incorporating the proposed design methodologies for low power consumption is also presented. An image enhancement application is considered and the proposed partitioning and gating, and NDA methods are utilized in the design of the enhancement system. Experimental results show that the proposed multi-level power aware methodology achieves considerable power reduction. Research work is progressing In utilizing the data dependencies in subsequent frames in a video stream for the reduction of circuit switching activities and thereby the dynamic power consumption

Introduction to Logic Circuits & Logic Design with VHDL

The overall goal of this book is to fill a void that has appeared in the instruction of digital circuits over the past decade due to the rapid abstraction of system design. Up until the mid-1980s, digital circuits were designed using classical techniques. Classical techniques relied heavily on manual design practices for the synthesis, minimization, and interfacing of digital systems. Corresponding to this design style, academic textbooks were developed that taught classical digital design techniques. Around 1990, large-scale digital systems began being designed using hardware description languages (HDL) and automated synthesis tools. Broad-scale adoption of this modern design approach spread through the industry during this decade. Around 2000, hardware description languages and the modern digital design approach began to be taught in universities, mainly at the senior and graduate level. There were a variety of reasons that the modern digital design approach did not penetrate the lower levels of academia during this time. First, the design and simulation tools were difficult to use and overwhelmed freshman and sophomore students. Second, the ability to implement the designs in a laboratory setting was infeasible. The modern design tools at the time were targeted at custom integrated circuits, which are cost- and time-prohibitive to implement in a university setting. Between 2000 and 2005, rapid advances in programmable logic and design tools allowed the modern digital design approach to be implemented in a university setting, even in lower-level courses. This allowed students to learn the modern design approach based on HDLs and prototype their designs in real hardware, mainly field programmable gate arrays (FPGAs). This spurred an abundance of textbooks to be authored teaching hardware description languages and higher levels of design abstraction. This trend has continued until today. While abstraction is a critical tool for engineering design, the rapid movement toward teaching only the modern digital design techniques has left a void for freshman- and sophomore-level courses in digital circuitry. Legacy textbooks that teach the classical design approach are outdated and do not contain sufficient coverage of HDLs to prepare the students for follow-on classes. Newer textbooks that teach the modern digital design approach move immediately into high-level behavioral modeling with minimal or no coverage of the underlying hardware used to implement the systems. As a result, students are not being provided the resources to understand the fundamental hardware theory that lies beneath the modern abstraction such as interfacing, gate-level implementation, and technology optimization. Students moving too rapidly into high levels of abstraction have little understanding of what is going on when they click the “compile and synthesize” button of their design tool. This leads to graduates who can model a breadth of different systems in an HDL but have no depth into how the system is implemented in hardware. This becomes problematic when an issue arises in a real design and there is no foundational knowledge for the students to fall back on in order to debug the problem

Fundamentals of computer systems architecture

In the study guide "Fundamentals of computer systems architecture" the questions of presentation of information in different systems of calculation, execution of logical and arithmetic operations are considered. Each chapter provides the necessary theoretical information, examples of presentation of information and examples of execution of arithmetic and logical operations, given tasks for self-execution and control questions. For the students of specialties 121 – “Software Engineering” and 123 – “Computer Engineering”