Radiation safety based on the sky shine effect in reactor

In the reactor operation, neutrons and gamma rays are the most dominant radiation. As protection, lead and concrete shields are built around the reactor. However, the radiation can penetrate the water shielding inside the reactor pool. This incident leads to the occurrence of sky shine where a physical phenomenon of nuclear radiation sources was transmitted panoramic that extends to the environment. The effect of this phenomenon is caused by the fallout radiation into the surrounding area which causes the radiation dose to increase. High doses of exposure cause a person to have stochastic effects or deterministic effects. Therefore, this study was conducted to measure the radiation dose from sky shine effect that scattered around the reactor at different distances and different height above the reactor platform. In this paper, the analysis of the radiation dose of sky shine effect was measured using the experimental metho

Fog computing, applications , security and challenges, review

The internet of things originates a world where on daily basis objects can join the internet and interchange information and in addition process, store, gather them from the nearby environment, and effectively mediate on it. A remarkable number of services might be imagined by abusing the internet of things. Fog computing which is otherwise called edge computing was introduced in 2012 as a considered is a prioritized choice for the internet of things applications. As fog computing extend services of cloud near to the edge of the network and make possible computations, communications, and storage services in proximity to the end user. Fog computing cannot only provide low latency, location awareness but also enhance real-time applications, quality of services, mobility, security and privacy in the internet of things applications scenarios. In this paper, we will summarize and overview fog computing model architecture, characteristic, similar paradigm and various applications in real-time scenarios such as smart grid, traffic control system and augmented reality. Finally, security challenges are presented

Exploiting Inter- and Intra-Memory Asymmetries for Data Mapping in Hybrid Tiered-Memories

Modern computing systems are embracing hybrid memory comprising of DRAM and non-volatile memory (NVM) to combine the best properties of both memory technologies, achieving low latency, high reliability, and high density. A prominent characteristic of DRAM-NVM hybrid memory is that it has NVM access latency much higher than DRAM access latency. We call this inter-memory asymmetry. We observe that parasitic components on a long bitline are a major source of high latency in both DRAM and NVM, and a significant factor contributing to high-voltage operations in NVM, which impact their reliability. We propose an architectural change, where each long bitline in DRAM and NVM is split into two segments by an isolation transistor. One segment can be accessed with lower latency and operating voltage than the other. By introducing tiers, we enable non-uniform accesses within each memory type (which we call intra-memory asymmetry), leading to performance and reliability trade-offs in DRAM-NVM hybrid memory. We extend existing NVM-DRAM OS in three ways. First, we exploit both inter- and intra-memory asymmetries to allocate and migrate memory pages between the tiers in DRAM and NVM. Second, we improve the OS's page allocation decisions by predicting the access intensity of a newly-referenced memory page in a program and placing it to a matching tier during its initial allocation. This minimizes page migrations during program execution, lowering the performance overhead. Third, we propose a solution to migrate pages between the tiers of the same memory without transferring data over the memory channel, minimizing channel occupancy and improving performance. Our overall approach, which we call MNEME, to enable and exploit asymmetries in DRAM-NVM hybrid tiered memory improves both performance and reliability for both single-core and multi-programmed workloads.Comment: 15 pages, 29 figures, accepted at ACM SIGPLAN International Symposium on Memory Managemen

OpenCL + OpenSHMEM Hybrid Programming Model for the Adapteva Epiphany Architecture

There is interest in exploring hybrid OpenSHMEM + X programming models to extend the applicability of the OpenSHMEM interface to more hardware architectures. We present a hybrid OpenCL + OpenSHMEM programming model for device-level programming for architectures like the Adapteva Epiphany many-core RISC array processor. The Epiphany architecture comprises a 2D array of low-power RISC cores with minimal uncore functionality connected by a 2D mesh Network-on-Chip (NoC). The Epiphany architecture offers high computational energy efficiency for integer and floating point calculations as well as parallel scalability. The Epiphany-III is available as a coprocessor in platforms that also utilize an ARM CPU host. OpenCL provides good functionality for supporting a co-design programming model in which the host CPU offloads parallel work to a coprocessor. However, the OpenCL memory model is inconsistent with the Epiphany memory architecture and lacks support for inter-core communication. We propose a hybrid programming model in which OpenSHMEM provides a better solution by replacing the non-standard OpenCL extensions introduced to achieve high performance with the Epiphany architecture. We demonstrate the proposed programming model for matrix-matrix multiplication based on Cannon's algorithm showing that the hybrid model addresses the deficiencies of using OpenCL alone to achieve good benchmark performance.Comment: 12 pages, 5 figures, OpenSHMEM 2016: Third workshop on OpenSHMEM and Related Technologie

Strengthening measurements from the edges: application-level packet loss rate estimation

Network users know much less than ISPs, Internet exchanges and content providers about what happens inside the network. Consequently users cannot either easily detect network neutrality violations or readily exercise their market power by knowledgeably switching ISPs. This paper contributes to the ongoing efforts to empower users by proposing two models to estimate -- via application-level measurements -- a key network indicator, i.e., the packet loss rate (PLR) experienced by FTP-like TCP downloads. Controlled, testbed, and large-scale experiments show that the Inverse Mathis model is simpler and more consistent across the whole PLR range, but less accurate than the more advanced Likely Rexmit model for landline connections and moderate PL

Probabilistic structural mechanics research for parallel processing computers

Aerospace structures and spacecraft are a complex assemblage of structural components that are subjected to a variety of complex, cyclic, and transient loading conditions. Significant modeling uncertainties are present in these structures, in addition to the inherent randomness of material properties and loads. To properly account for these uncertainties in evaluating and assessing the reliability of these components and structures, probabilistic structural mechanics (PSM) procedures must be used. Much research has focused on basic theory development and the development of approximate analytic solution methods in random vibrations and structural reliability. Practical application of PSM methods was hampered by their computationally intense nature. Solution of PSM problems requires repeated analyses of structures that are often large, and exhibit nonlinear and/or dynamic response behavior. These methods are all inherently parallel and ideally suited to implementation on parallel processing computers. New hardware architectures and innovative control software and solution methodologies are needed to make solution of large scale PSM problems practical

Electronic and photonic switching in the atm era

Broadband networks require high-capacity switches in order to properly manage large amounts of traffic fluxes. Electronic and photonic technologies are being used to achieve this objective both allowing different multiplexing and switching techniques. Focusing on the asynchronous transfer mode (ATM), the inherent different characteristics of electronics and photonics makes different architectures feasible. In this paper, different switching structures are described, several ATM switching architectures which have been recently implemented are presented and the implementation characteristics discussed. Three diverse points of view are given from the electronic research, the photonic research and the commercial switches. Although all the architectures where successfully tested, they should also follow different market requirements in order to be commercialised. The characteristics are presented and the architectures projected over them to evaluate their commercial capabilities.Peer ReviewedPostprint (published version

Experiences with porting and modelling wavefront algorithms on many-core architectures

We are currently investigating the viability of many-core architectures for the acceleration of wavefront applications and this report focuses on graphics processing units (GPUs) in particular. To this end, we have implemented NASA’s LU benchmark – a real world production-grade application – on GPUs employing NVIDIA’s Compute Unified Device Architecture (CUDA). This GPU implementation of the benchmark has been used to investigate the performance of a selection of GPUs, ranging from workstation-grade commodity GPUs to the HPC "Tesla” and "Fermi” GPUs. We have also compared the performance of the GPU solution at scale to that of traditional high perfor- mance computing (HPC) clusters based on a range of multi- core CPUs from a number of major vendors, including Intel (Nehalem), AMD (Opteron) and IBM (PowerPC). In previous work we have developed a predictive “plug-and-play” performance model of this class of application running on such clusters, in which CPUs communicate via the Message Passing Interface (MPI). By extending this model to also capture the performance behaviour of GPUs, we are able to: (1) comment on the effects that architectural changes will have on the performance of single-GPU solutions, and (2) make projections regarding the performance of multi-GPU solutions at larger scale