6,317 research outputs found
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Secure Routing in Wireless Mesh Networks
Wireless mesh networks (WMNs) have emerged as a promising concept to meet the
challenges in next-generation networks such as providing flexible, adaptive,
and reconfigurable architecture while offering cost-effective solutions to the
service providers. Unlike traditional Wi-Fi networks, with each access point
(AP) connected to the wired network, in WMNs only a subset of the APs are
required to be connected to the wired network. The APs that are connected to
the wired network are called the Internet gateways (IGWs), while the APs that
do not have wired connections are called the mesh routers (MRs). The MRs are
connected to the IGWs using multi-hop communication. The IGWs provide access to
conventional clients and interconnect ad hoc, sensor, cellular, and other
networks to the Internet. However, most of the existing routing protocols for
WMNs are extensions of protocols originally designed for mobile ad hoc networks
(MANETs) and thus they perform sub-optimally. Moreover, most routing protocols
for WMNs are designed without security issues in mind, where the nodes are all
assumed to be honest. In practical deployment scenarios, this assumption does
not hold. This chapter provides a comprehensive overview of security issues in
WMNs and then particularly focuses on secure routing in these networks. First,
it identifies security vulnerabilities in the medium access control (MAC) and
the network layers. Various possibilities of compromising data confidentiality,
data integrity, replay attacks and offline cryptanalysis are also discussed.
Then various types of attacks in the MAC and the network layers are discussed.
After enumerating the various types of attacks on the MAC and the network
layer, the chapter briefly discusses on some of the preventive mechanisms for
these attacks.Comment: 44 pages, 17 figures, 5 table
A Review of the Energy Efficient and Secure Multicast Routing Protocols for Mobile Ad hoc Networks
This paper presents a thorough survey of recent work addressing energy
efficient multicast routing protocols and secure multicast routing protocols in
Mobile Ad hoc Networks (MANETs). There are so many issues and solutions which
witness the need of energy management and security in ad hoc wireless networks.
The objective of a multicast routing protocol for MANETs is to support the
propagation of data from a sender to all the receivers of a multicast group
while trying to use the available bandwidth efficiently in the presence of
frequent topology changes. Multicasting can improve the efficiency of the
wireless link when sending multiple copies of messages by exploiting the
inherent broadcast property of wireless transmission. Secure multicast routing
plays a significant role in MANETs. However, offering energy efficient and
secure multicast routing is a difficult and challenging task. In recent years,
various multicast routing protocols have been proposed for MANETs. These
protocols have distinguishing features and use different mechanismsComment: 15 page
Low Power, Low Delay: Opportunistic Routing meets Duty Cycling
Traditionally, routing in wireless sensor networks consists of
two steps: First, the routing protocol selects a next hop,
and, second, the MAC protocol waits for the intended destination
to wake up and receive the data. This design makes
it difficult to adapt to link dynamics and introduces delays
while waiting for the next hop to wake up.
In this paper we introduce ORW, a practical opportunistic
routing scheme for wireless sensor networks. In a dutycycled
setting, packets are addressed to sets of potential receivers
and forwarded by the neighbor that wakes up first
and successfully receives the packet. This reduces delay and
energy consumption by utilizing all neighbors as potential
forwarders. Furthermore, this increases resilience to wireless
link dynamics by exploiting spatial diversity. Our results
show that ORW reduces radio duty-cycles on average
by 50% (up to 90% on individual nodes) and delays by 30%
to 90% when compared to the state of the art
How to Choose the Relevant MAC Protocol for Wireless Smart Parking Urban Networks?
Parking sensor network is rapidly deploying around the world and is regarded
as one of the first implemented urban services in smart cities. To provide the
best network performance, the MAC protocol shall be adaptive enough in order to
satisfy the traffic intensity and variation of parking sensors. In this paper,
we study the heavy-tailed parking and vacant time models from SmartSantander,
and then we apply the traffic model in the simulation with four different kinds
of MAC protocols, that is, contention-based, schedule-based and two hybrid
versions of them. The result shows that the packet interarrival time is no
longer heavy-tailed while collecting a group of parking sensors, and then
choosing an appropriate MAC protocol highly depends on the network
configuration. Also, the information delay is bounded by traffic and MAC
parameters which are important criteria while the timely message is required.Comment: The 11th ACM International Symposium on Performance Evaluation of
Wireless Ad Hoc, Sensor, and Ubiquitous Networks (2014
Security and Privacy Issues in Wireless Mesh Networks: A Survey
This book chapter identifies various security threats in wireless mesh
network (WMN). Keeping in mind the critical requirement of security and user
privacy in WMNs, this chapter provides a comprehensive overview of various
possible attacks on different layers of the communication protocol stack for
WMNs and their corresponding defense mechanisms. First, it identifies the
security vulnerabilities in the physical, link, network, transport, application
layers. Furthermore, various possible attacks on the key management protocols,
user authentication and access control protocols, and user privacy preservation
protocols are presented. After enumerating various possible attacks, the
chapter provides a detailed discussion on various existing security mechanisms
and protocols to defend against and wherever possible prevent the possible
attacks. Comparative analyses are also presented on the security schemes with
regards to the cryptographic schemes used, key management strategies deployed,
use of any trusted third party, computation and communication overhead involved
etc. The chapter then presents a brief discussion on various trust management
approaches for WMNs since trust and reputation-based schemes are increasingly
becoming popular for enforcing security in wireless networks. A number of open
problems in security and privacy issues for WMNs are subsequently discussed
before the chapter is finally concluded.Comment: 62 pages, 12 figures, 6 tables. This chapter is an extension of the
author's previous submission in arXiv submission: arXiv:1102.1226. There are
some text overlaps with the previous submissio
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
- …