The application of remote sensing to identify and measure sealed soil and vegetated surfaces in urban environments

Soil is an important non-renewable source. Its protection and allocation is critical to sustainable development goals. Urban development presents an important drive of soil loss due to sealing over by buildings, pavements and transport infrastructure. Monitoring sealed soil surfaces in urban environments is gaining increasing interest not only for scientific research studies but also for local planning and national authorities. The aim of this research was to investigate the extent to which automated classification methods can detect soil sealing in UK urban environments, by remote sensing. The objectives include development of object-based classification methods, using two types of earth observation data, and evaluation by comparison with manual aerial photo interpretation techniques. Four sample areas within the city of Cambridge were used for the development of an object-based classification model. The acquired data was a true-colour aerial photography (0.125 m resolution) and a QuickBird satellite imagery (2.8 multi-spectral resolution). The classification scheme included the following land cover classes: sealed surfaces, vegetated surfaces, trees, bare soil and rail tracks. Shadowed areas were also identified as an initial class and attempts were made to reclassify them into the actual land cover type. The accuracy of the thematic maps was determined by comparison with polygons derived from manual air-photo interpretation; the average overall accuracy was 84%. The creation of simple binary maps of sealed vs. vegetated surfaces resulted in a statistically significant accuracy increase to 92%. The integration of ancillary data (OS MasterMap) into the object-based model did not improve the performance of the model (overall accuracy of 91%). The use of satellite data in the object-based model gave an overall accuracy of 80%, a 7% decrease compared to the aerial photography. Future investigation will explore whether the integration of elevation data will aid to discriminate features such as trees from other vegetation types. The use of colour infrared aerial photography should also be tested. Finally, the application of the object- based classification model into a different study area would test its transferability

Water-related ecosystems' mapping and assessment based on remote sensing techniques and geospatial analysis: The SWOS national service case of the Greek Ramsar sites and their catchments

Water-related ecosystems' mapping and assessment based on remote sensing techniques and geospatial analysis: The SWOS national service case of the Greek Ramsar sites and their catchments. Remote Sensing of Environment 245 (2020) 111795. doi.org/10.1016/j.rse.2020.11179

Integrating openstreetmap data and sentinel-2 Imagery for classifying and monitoring informal settlements

Dissertation submitted in partial fulfilment of the requirements for the degree of Master of Science in Geospatial TechnologiesThe identification and monitoring of informal settlements in urban areas is an important step in developing and implementing pro-poor urban policies. Understanding when, where and who lives inside informal settlements is critical to efforts to improve their resilience. This study aims at integrating OSM data and sentinel-2 imagery for classifying and monitoring the growth of informal settlements methods to map informal areas in Kampala (Uganda) and Dar es Salaam (Tanzania) and to monitor their growth in Kampala. Three building feature characteristics of size, shape and Distance to nearest Neighbour were derived and used to cluster and classify informal areas using Hotspot Cluster analysis and ML approach on OSM buildings data. The resultant informal regions in Kampala were used with Sentinel-2 image tiles to investigate the spatiotemporal changes in informal areas using Convolutional Neural Networks (CNNs). Results from Optimized Hot Spot Analysis and Random Forest Classification show that Informal regions can be mapped based on building outline characteristics. An accuracy of 90.3% was achieved when an optimally trained CNN was executed on a test set of 2019 satellite image tiles. Predictions of informality from new datasets for the years 2016 and 2017 provided promising results on combining different open source geospatial datasets to identify, classify and monitor informal settlements

The application of remote sensing to identify and measure sealed soil and vegetated surfaces in urban environments

Soil is an important non-renewable source. Its protection and allocation is critical to sustainable development goals. Urban development presents an important drive of soil loss due to sealing over by buildings, pavements and transport infrastructure. Monitoring sealed soil surfaces in urban environments is gaining increasing interest not only for scientific research studies but also for local planning and national authorities. The aim of this research was to investigate the extent to which automated classification methods can detect soil sealing in UK urban environments, by remote sensing. The objectives include development of object-based classification methods, using two types of earth observation data, and evaluation by comparison with manual aerial photo interpretation techniques. Four sample areas within the city of Cambridge were used for the development of an object-based classification model. The acquired data was a true-colour aerial photography (0.125 m resolution) and a QuickBird satellite imagery (2.8 multi-spectral resolution). The classification scheme included the following land cover classes: sealed surfaces, vegetated surfaces, trees, bare soil and rail tracks. Shadowed areas were also identified as an initial class and attempts were made to reclassify them into the actual land cover type. The accuracy of the thematic maps was determined by comparison with polygons derived from manual air-photo interpretation; the average overall accuracy was 84%. The creation of simple binary maps of sealed vs. vegetated surfaces resulted in a statistically significant accuracy increase to 92%. The integration of ancillary data (OS MasterMap) into the object-based model did not improve the performance of the model (overall accuracy of 91%). The use of satellite data in the object-based model gave an overall accuracy of 80%, a 7% decrease compared to the aerial photography. Future investigation will explore whether the integration of elevation data will aid to discriminate features such as trees from other vegetation types. The use of colour infrared aerial photography should also be tested. Finally, the application of the object- based classification model into a different study area would test its transferability.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Random Subset Feature Selection for Ecological Niche Modeling of Wildfire Activity and the Monarch Butterfly

Correlative ecological niche models (ENMs) are essential for investigating distributions of species and natural phenomena via environmental correlates across broad fields, including entomology and pyrogeography featured in this study. Feature (variable) selection is critical for producing more robust ENMs with greater transferability across space and time, but few studies evaluate formal feature selection algorithms (FSAs) for producing higher performance ENMs. Variability of ENMs arising from feature subsets is also seldom represented. A novel FSA is developed and evaluated, the random subset feature selection algorithm (RSFSA). The RSFSA generates an ensemble of higher accuracy ENMs from different feature subsets, producing a feature subset ensemble (FSE). The RSFSA-selected FSEs are novelly used to represent ENM variability. Wildfire activity presence/absence databases for the western US prove ideal for evaluating RSFSA-selected MaxEnt ENMs. The RSFSA was effective in identifying FSEs of 15 of 90 variables with higher accuracy and information content than random FSEs. Selected FSEs were used to identify severe contemporary wildfire deficits and significant future increases in wildfire activity for many ecoregions. Migratory roosting localities of declining eastern North American monarch butterflies (Danaus plexippus) were used to spatially model migratory pathways, comparing RSFSAselected MaxEnt ENMs and kernel density estimate models (KDEMs). The higher information content ENMs best correlated migratory pathways with nectar resources in grasslands. Higher accuracy KDEMs best revealed migratory pathways through less suitable desert environments. Monarch butterfly roadkill data was surveyed for Texas within the main Oklahoma to Mexico Central Funnel migratory pathway. A random FSE of MaxEnt roadkill ENMs was used to estimate a 2-3% loss of migrants to roadkill. Hotspots of roadkill in west Texas and Mexico were recommended for assessing roadkill mitigation to assist in monarch population recovery. The RSFSA effectively produces higher performance ENM FSEs for estimating optimal feature subset sizes, and comparing ENM algorithms and parameters, and environmental scenarios. The RSFSA also performed comparably to expert variable selection, confirming its value in the absence of expert information. The RSFSA should be compared with other FSAs for developing ENMs and in data mining applications across other disciplines, such as image classification and molecular bioinformatics

The application of remote sensing to identify and measure sealed soil and vegetated surfaces in urban environments

Soil is an important non-renewable source. Its protection and allocation is critical to sustainable development goals. Urban development presents an important drive of soil loss due to sealing over by buildings, pavements and transport infrastructure. Monitoring sealed soil surfaces in urban environments is gaining increasing interest not only for scientific research studies but also for local planning and national authorities. The aim of this research was to investigate the extent to which automated classification methods can detect soil sealing in UK urban environments, by remote sensing. The objectives include development of object-based classification methods, using two types of earth observation data, and evaluation by comparison with manual aerial photo interpretation techniques. Four sample areas within the city of Cambridge were used for the development of an object-based classification model. The acquired data was a true-colour aerial photography (0.125 m resolution) and a QuickBird satellite imagery (2.8 multi-spectral resolution). The classification scheme included the following land cover classes: sealed surfaces, vegetated surfaces, trees, bare soil and rail tracks. Shadowed areas were also identified as an initial class and attempts were made to reclassify them into the actual land cover type. The accuracy of the thematic maps was determined by comparison with polygons derived from manual air-photo interpretation; the average overall accuracy was 84%. The creation of simple binary maps of sealed vs. vegetated surfaces resulted in a statistically significant accuracy increase to 92%. The integration of ancillary data (OS MasterMap) into the object-based model did not improve the performance of the model (overall accuracy of 91%). The use of satellite data in the object-based model gave an overall accuracy of 80%, a 7% decrease compared to the aerial photography. Future investigation will explore whether the integration of elevation data will aid to discriminate features such as trees from other vegetation types. The use of colour infrared aerial photography should also be tested. Finally, the application of the object- based classification model into a different study area would test its transferability.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Land Use Change from Non-urban to Urban Areas

This reprint is related to land-use change and non-urban and urban relationships at all spatiotemporal scales and also focuses on land-use planning and regulatory strategies for a sustainable future. Spatiotemporal dynamics, socioeconomic implication, water supply problems and deforestation land degradation (e.g., increase of imperviousness surfaces) produced by urban expansion and their resource requirements are of particular interest. The Guest Editors expect that this reprint will contribute to sustainable development in non-urban and urban areas

An integrative approach using remote sensing and social analysis to identify different settlement types and the specific living conditions of its inhabitants

Someday in 2007, the world population reached a historical landmark: for the first time in human history, more than half of the world´s population was urban. A stagnation of this urbanization process is not in sight, so that by 2050, already 70 percent of humankind is projected to live in urban settlements. Over the last few decades, enormous migrations from rural hinterlands to steadily growing cities could be witnessed coming along with a dramatic growth of the world’s urban population. The speed and the scale of this growth, particularly in the so called less developed regions, are posing tremendous challenges to the countries concerned as well as to the world community. Within mega cities the strongest trends and the most extreme dimensions of the urbanization process can be observed. Their rapid growth results in uncontrolled processes of fragmentation which is often associated with pronounced poverty, social inequality, socio-spatial and political fragmentation, environmental degradation as well as population demands that outstrip environmental service capacity. For the majority of the mega cities a tremendous increase of informal structures and processes has to be observed. Consequentially informal settlements are growing, which represent those characteristic municipal areas being subject to particularly high population density, dynamics as well as marginalization. They have quickly become the most visible expression of urban poverty in developing world cities. Due to the extreme dynamics, the high complexity and huge spatial dimension of mega cities, urban administrations often only have an obsolete or not even existing data basis available to be at all informed about developments, trends and dimensions of urban growth and change. The knowledge about the living conditions of the residents is correspondingly very limited, incomplete and not up to date. Traditional methods such as statistical and regional analyses or fieldwork are no longer capable to capture such urban process. New data sources and monitoring methodologies are required in order to provide an up to date information basis as well as planning strate¬gies to enable sustainable developments and to simplify planning processes in complex urban structures. This research shall seize the described problem and aims to make a contribution to the requirements of monitoring fast developing mega cities. Against this background a methodology is developed to compensate the lack of socio-economic data and to deduce meaningful information on the living conditions of the inhabitants of mega cities. Neither social science methods alone nor the exclusive analysis of remote sensing data can solve the problem of the poor quality and outdated data base. Conventional social science methods cannot cope with the enormous developments and the tremendous growth as they are too labor-, as well as too time- and too cost-intensive. On the other hand, the physical discipline of remote sensing does not allow for direct conclusions on social parameters out of remote sensing images. The prime objective of this research is therefore the development of an integrative approach − bridging remote sensing and social analysis – in order to derive useful information about the living conditions in this specific case of the mega city Delhi and its inhabitants. Hence, this work is established in the overlapping range of the research topics remote sensing, urban areas and social science. Delhi, as India’s fast growing capital, meanwhile with almost 25 million residents the second largest city of the world, represents a prime example of a mega city. Since the second half of the 20th century, Delhi has been transformed from a modest town with mainly administrative and trade-related functions to a complex metropolis with a steep socio-economic gradient. The quality and amount of administrative and socio-economic data are poor and the knowledge about the circumstances of Delhi’s residents is correspondingly insufficient and outdated. Delhi represents therefore a perfectly suited study area for this research. In order to gather information about the living conditions within the different settlement types a methodology was developed and conducted to analyze the urban environment of the mega city Delhi. To identify different settlement types within the urban area, regarding the complex and heterogeneous appearance of the Delhi area, a semi-automated, object-oriented classification approach, based on segmentation derived image objects, was implemented. As the complete conceptual framework of this research, the classification methodology was developed based on a smaller representative training area at first and applied to larger test sites within Delhi afterwards. The object-oriented classification of VHR satellite imagery of the QuickBird sensor allowed for the identification of five different urban land cover classes within the municipal area of Delhi. In the focus of the image analysis is yet the identification of different settlement types and amongst these of informal settlements in particular. The results presented within this study demonstrate, that, based on density classes, the developed methodology is suitable to identify different settlement types and to detect informal settlements which are mega urban risk areas and thus potential residential zones of vulnerable population groups. The remote sensing derived land cover maps form the foundation for the integrative analysis concept and deliver there¬fore the general basis for the derivation of social attributes out of remote sensing data. For this purpose settlement characteristics (e.g., area of the settlement, average building size, and number of houses) are estimated from the classified QuickBird data and used to derive spatial information about the population distribution. In a next step, the derived information is combined with in-situ information on socio-economic conditions (e.g., family size, mean water consumption per capita/family) extracted from georeferenced questionnaires conducted during two field trips in Delhi. This combined data is used to characterize a given settlement type in terms of specific population and water related variables (e.g., population density, total water consumption). With this integrative methodology a catalogue can be compiled, comprising the living conditions of Delhi’s inhabitants living in specific settlement structures – and this in a quick, large-scaled, cost effective, by random or regularly repeatable way with a relatively small required data basis.The combined application of remotely sensed imagery and socio-economic data allows for the mapping, capturing and characterizing the socio-economic structures and dynamics within the mega city of Delhi, as well as it establishes a basis for the monitoring of the mega city of Delhi or certain areas within the city respectively by remote sensing. The opportunity to capture the condition of a mega city and to monitor its development in general enables the persons in charge to identify unbeneficial trends and to intervene accordingly from an urban planning perspective and to countersteer against a non-adequate supply of the inhabitants of different urban districts, primarily of those of informal settlements. This study is understood to be a first step to the development of methods which will help to identify and understand the different forms, actors and processes of urbanization in mega cities. It could support a more proactive and sustainable urban planning and land management – which in turn will increase the importance of urban remote sensing techniques. In this regard, the most obvious and direct beneficiaries are on the one hand the governmental agencies and urban planners and on the other hand, and which is possibly the most important goal, the inhabitants of the affected areas, whose living conditions can be monitored and improved as required. Only if the urban monitoring is quickly, inexpensively and easily available, it will be accepted and applied by the authorities, which in turn enables for the poorest to get the support they need. All in all, the listed benefits are very convincing and corroborate the combined use of remotely sensed and socio-economic data in mega city research