SystemC-based Minimum Intrusive Fault Injection Technique with Improved Fault Representation

In this paper, we propose a new SystemC-based fault injection technique that has improved fault representation in visible and on-the-fly data and signal registers. The technique is minimum intrusive since it only requires replacing the original data or signal types to fault injection enabler types. We compare the proposed simulation technique with recently reported SystemC-based techniques and show that our technique has fast simulation speed, better fault representation, while maintaining simplicity and minimum intrusion. We demonstrate fault injection capabilities in a behavioural SystemC description of MPEG-2 decoder using proposed technique and show that up to 98.9% fault representation within data and signal registers can be achieved

An On-line BIST RAM Architecture with Self Repair Capabilities

The emerging field of self-repair computing is expected to have a major impact on deployable systems for space missions and defense applications, where high reliability, availability, and serviceability are needed. In this context, RAM (random access memories) are among the most critical components. This paper proposes a built-in self-repair (BISR) approach for RAM cores. The proposed design, introducing minimal and technology-dependent overheads, can detect and repair a wide range of memory faults including: stuck-at, coupling, and address faults. The test and repair capabilities are used on-line, and are completely transparent to the external user, who can use the memory without any change in the memory-access protocol. Using a fault-injection environment that can emulate the occurrence of faults inside the module, the effectiveness of the proposed architecture in terms of both fault detection and repairing capability was verified. Memories of various sizes have been considered to evaluate the area-overhead introduced by this proposed architectur

Study of the effects of SEU-induced faults on a pipeline protected microprocessor

This paper presents a detailed analysis of the behavior of a novel fault-tolerant 32-bit embedded CPU as compared to a default (non-fault-tolerant) implementation of the same processor during a fault injection campaign of single and double faults. The fault-tolerant processor tested is characterized by per-cycle voting of microarchitectural and the flop-based architectural states, redundancy at the pipeline level, and a distributed voting scheme. Its fault-tolerant behavior is characterized for three different workloads from the automotive application domain. The study proposes statistical methods for both the single and dual fault injection campaigns and demonstrates the fault-tolerant capability of both processors in terms of fault latencies, the probability of fault manifestation, and the behavior of latent faults

A Self-Repairing Execution Unit for Microprogrammed Processors

Describes a processor which dynamically reconfigures its internal microcode to execute each instruction using only fault-free blocks from the execution unit. Working without redundant or spare computational blocks, this self-repair approach permits a graceful performance degradatio

Dependability assessment of by-wire control systems using fault injection

This paper is focused on the validation by means of physical fault injection at pin-level of a time-triggered communication controller: the TTP/C versions C1 and C2. The controller is a commercial off-the-shelf product used in the design of by-wire systems. Drive-by-wire and fly-by-wire active safety controls aim to prevent accidents. They are considered to be of critical importance because a serious situation may directly affect user safety. Therefore, dependability assessment is vital in their design. This work was funded by the European project `Fault Injection for TTA¿ and it is divided into two parts. In the first part, there is a verification of the dependability specifications of the TTP communication protocol, based on TTA, in the presence of faults directly induced in communication lines. The second part contains a validation and improvement proposal for the architecture in case of data errors. Such errors are due to faults that occurred during writing (or reading) actions on memory or during data storage.Blanc Clavero, S.; Bonastre Pina, AM.; Gil, P. (2009). Dependability assessment of by-wire control systems using fault injection. Journal of Systems Architecture. 55(2):102-113. doi:10.1016/j.sysarc.2008.09.003S10211355

Simulation-based Fault Injection with QEMU for Speeding-up Dependability Analysis of Embedded Software

Simulation-based fault injection (SFI) represents a valuable solu- tion for early analysis of software dependability and fault tolerance properties before the physical prototype of the target platform is available. Some SFI approaches base the fault injection strategy on cycle-accurate models imple- mented by means of Hardware Description Languages (HDLs). However, cycle- accurate simulation has revealed to be too time-consuming when the objective is to emulate the effect of soft errors on complex microprocessors. To overcome this issue, SFI solutions based on virtual prototypes of the target platform has started to be proposed. However, current approaches still present some draw- backs, like, for example, they work only for specific CPU architectures, or they require code instrumentation, or they have a different target (i.e., design errors instead of dependability analysis). To address these disadvantages, this paper presents an efficient fault injection approach based on QEMU, one of the most efficient and popular instruction-accurate emulator for several microprocessor architectures. As main goal, the proposed approach represents a non intrusive technique for simulating hardware faults affecting CPU behaviours. Perma- nent and transient/intermittent hardware fault models have been abstracted without losing quality for software dependability analysis. The approach mini- mizes the impact of the fault injection procedure in the emulator performance by preserving the original dynamic binary translation mechanism of QEMU. Experimental results for both x86 and ARM processors proving the efficiency and effectiveness of the proposed approach are presented

A watchdog processor to detect data and control flow errors

A watchdog processor for the MOTOROLA M68040 microprocessor is presented. Its main task is to protect from transient faults caused by SEUs the transmission of data between the processor and the system memory, and to ensure a correct instructions' flow, just monitoring the external bus, without modifying the internal architecture of the M68040. A description of the principal procedures is given, together with the method used for monitoring the instructions' flow

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

inSense: A Variation and Fault Tolerant Architecture for Nanoscale Devices

Transistor technology scaling has been the driving force in improving the size, speed, and power consumption of digital systems. As devices approach atomic size, however, their reliability and performance are increasingly compromised due to reduced noise margins, difficulties in fabrication, and emergent nano-scale phenomena. Scaled CMOS devices, in particular, suffer from process variations such as random dopant fluctuation (RDF) and line edge roughness (LER), transistor degradation mechanisms such as negative-bias temperature instability (NBTI) and hot-carrier injection (HCI), and increased sensitivity to single event upsets (SEUs). Consequently, future devices may exhibit reduced performance, diminished lifetimes, and poor reliability. This research proposes a variation and fault tolerant architecture, the inSense architecture, as a circuit-level solution to the problems induced by the aforementioned phenomena. The inSense architecture entails augmenting circuits with introspective and sensory capabilities which are able to dynamically detect and compensate for process variations, transistor degradation, and soft errors. This approach creates ``smart\u27\u27 circuits able to function despite the use of unreliable devices and is applicable to current CMOS technology as well as next-generation devices using new materials and structures. Furthermore, this work presents an automated prototype implementation of the inSense architecture targeted to CMOS devices and is evaluated via implementation in ISCAS \u2785 benchmark circuits. The automated prototype implementation is functionally verified and characterized: it is found that error detection capability (with error windows from $\approx$30-400ps) can be added for less than 2\% area overhead for circuits of non-trivial complexity. Single event transient (SET) detection capability (configurable with target set-points) is found to be functional, although it generally tracks the standard DMR implementation with respect to overheads

DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints