Autonomous homing and docking tasks for an underwater vehicle

This paper briefly introduces a strategy for autonomous homing and docking tasks using an autonomous underwater vehicle. The control and guidance based path following for those tasks are described in this work. A standard sliding mode for controller design is briefly given. The method provides robust motion control efforts for an underwater vehicle’s decoupled system whilst minimising chattering effects. In a guidance system, the vector field based on a conventional artificial potential field method gives a desired trajectory with a use of existing information from sensors in the network. A well structured Line-of-Sight method is used for an AUV to follow the path. It provides guidance for an AUV to follow the predefined trajectory to a required position with the final desired orientation at the dock. Integration of a control and guidance system provides a complete system for this application. Simulation studies are illustrated in the paper

Pose Detection and control of multiple unmanned underwater vehicles using optical feedback

This paper proposes pose detection and control algorithms in order to control the relative pose between two Unmanned Underwater Vehicles (UUVs) using optical feedback. The leader UUV is configured to have a light source at its crest which acts as a guiding beacon for the follower UUV which has a detector array at its bow. Pose detection algorithms are developed based on a classifier, such as the Spectral Angle Mapper (SAM), and chosen image parameters. An archive look-up table is constructed for varying combinations of 5-degree-of-freedom (DOF) motion (i.e., translation along all three coordinate axes as well as pitch and yaw rotations). Leader and follower vehicles are simulated for a case in which the leader is directed to specific waypoints in horizontal plane and the follower is required to maintain a fixed distance from the leader UUV. Proportional-Derivative (PD) control (without loss of generality) is applied to maintain stability of the UUVs to show proof of concept. Preliminary results indicate that the follower UUV is able to maintain its fixed distance relative to the leader UUV to within a reasonable accuracy

Characterization of optical communication in a leader-follower unmanned underwater vehicle formation

As part of the research to development an optical communication design of a leader-follower formation between unmanned underwater vehicles (UUVs), this paper presents light field characterization and design configuration of the hardware required to allow the use of distance detection between UUVs. The study specifically is targeting communication between remotely operated vehicles (ROVs). As an initial step in this study, the light field produced from a light source mounted on the leader UUV was empirically characterized and modeled. Based on the light field measurements, a photo-detector array for the follower UUV was designed. Evaluation of the communication algorithms to monitor the UUV’s motion was conducted through underwater experiments in the Ocean Engineering Laboratory at the University of New Hampshire. The optimal spectral range was determined based on the calculation of the diffuse attenuation coefficients by using two different light sources and a spectrometer. The range between the leader and the follower vehicles for a specific water type was determined. In addition, the array design and the communication algorithms were modified according to the results from the light field

A Unified Task Priority Control Framework Design for Autonomous Underwater Vehicles

In this thesis, we investigate the problem of bringing various behaviours of Autonomous Underwater Vehicles under a common control framework. Thereby, we propose a unified guidance and control framework for AUVs based on the task priority control approach. This incorporate various behaviors such as path following, terrain following, obstacle avoidance, as well as homing and docking to stationary and moving docking stations. The integration of homing and docking maneuvers into the task priority framework is thus a novel contribution of this thesis. This integration allows, for example, to execute homing maneuvers close to uneven seafloor or obstacles, ensuring the safety of the AUV by giving the highest priority to the safety tasks. Furthermore, the proposed approach tackles a wide range of scenarios without ad hoc solutions. Indeed, the proposed approach is well suited for both the emerging trend of resident AUVs, which stay underwater for a long period inside garage stations, exiting to perform inspection and maintenance missions and homing back to them, and for AUVs that are required to dock to moving stations such as surface vehicles, or towed docking stations. The proposed techniques are further studied in a simulation setting, taking into account the rich number of aforementioned scenarios

Intervention AUVs: The Next Challenge

While commercially available AUVs are routinely used in survey missions, a new set of applications exist which clearly demand intervention capabilities. The maintenance of: permanent underwater observatories, submerged oil wells, cabled sensor networks, pipes and the deployment and recovery of benthic stations are a few of them. These tasks are addressed nowadays using manned submersibles or work-class ROVs, equipped with teleoperated arms under human supervision. Although researchers have recently opened the door to future I-AUVs, a long path is still necessary to achieve autonomous underwater interventions. This paper reviews the evolution timeline in autonomous underwater intervention systems. Milestone projects in the state of the art are reviewed, highlighting their principal contributions to the field. To the best of the authors knowledge, only three vehicles have demonstrated some autonomous intervention capabilities so far: ALIVE, SAUVIM and GIRONA 500, being the last one the lightest one. In this paper GIRONA 500 I-AUV is presented and its software architecture discussed. Recent results in different scenarios are reported: 1) Valve turning and connector plugging/unplugging while docked to a subsea panel, 2) Free floating valve turning using learning by demonstration, and 3) Multipurpose free-floating object recovery. The paper ends discussing the lessons learned so far

Oceanic Challenges to Technological Solutions : A Review of Autonomous Underwater Vehicle Path Technologies in Biomimicry, Control, Navigation, and Sensing

Autonomous Underwater Vehicles (AUVs) epitomize a revolutionary stride in underwater exploration, seamlessly assuming tasks once exclusive to manned vehicles. Their collaborative prowess within joint missions has inaugurated a new epoch of intricate applications in underwater domains. This study’s primary aim is to scrutinize recent technological advancements in AUVs and their role in navigating the complexities of underwater environments. Through a meticulous review of literature and empirical studies, this review synthesizes recent technological strides, spotlighting developments in biomimicry models, cutting-edge control systems, adaptive navigation algorithms, and pivotal sensor arrays crucial for exploring and mapping the ocean floor. The article meticulously delineates the profound impact of AUVs on underwater robotics, offering a comprehensive panorama of advancements and illustrating their far-reaching implications for underwater exploration and mapping. This review furnishes a holistic comprehension of the current landscape of AUV technology. This condensed overview furnishes a swift comparative analysis, aiding in discerning the focal points of each study while spotlighting gaps and intersections within the existing body of knowledge. It efficiently steers researchers toward complementary sources, enabling a focused examination and judicious allocation of time to the most pertinent studies. Furthermore, it functions as a blueprint for comprehensive studies within the AUV domain, pinpointing areas where amalgamating multiple sources would yield a more comprehensive understanding. By elucidating the purpose, employing a robust methodology, and anticipating comprehensive results, this study endeavors to serve as a cornerstone resource that not only encapsulates recent technological strides but also provides actionable insights and directions for advancing the field of underwater robotics.© 2024 The Authors. This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License. For more information, see https://creativecommons.org/licenses/by-nc-nd/4.0/fi=vertaisarvioitu|en=peerReviewed

I-AUV Docking and Panel Intervention at Sea

The use of commercially available autonomous underwater vehicles (AUVs) has increased during the last fifteen years. While they are mainly used for routine survey missions, there is a set of applications that nowadays can be only addressed by manned submersibles or work-class remotely operated vehicles (ROVs) equipped with teleoperated arms: the intervention applications. To allow these heavy vehicles controlled by human operators to perform intervention tasks, underwater structures like observatory facilities, subsea panels or oil-well Christmas trees have been adapted, making them more robust and easier to operate. The TRITON Spanish founded project proposes the use of a light-weight intervention AUV (I-AUV) to carry out intervention applications simplifying the adaptation of these underwater structures and drastically reducing the operational cost. To prove this concept, the Girona 500 I-AUV is used to autonomously dock into an adapted subsea panel and once docked perform an intervention composed of turning a valve and plugging in/unplugging a connector. The techniques used for the autonomous docking and manipulation as well as the design of an adapted subsea panel with a funnel-based docking system are presented in this article together with the results achieved in a water tank and at sea.This work was supported by the Spanish project DPI2014-57746-C3 (MERBOTS Project) and by Generalitat Valenciana under Grant GVA-PROMETEO/2016/066. The University of Girona wants to thank the SARTI group for their collaboration with the TRITON project

I-AUV Docking and Panel Intervention at Sea

The use of commercially available autonomous underwater vehicles (AUVs) has increased during the last fifteen years. While they are mainly used for routine survey missions, there is a set of applications that nowadays can be only addressed by manned submersibles or work-class remotely operated vehicles (ROVs) equipped with teleoperated arms: the intervention applications. To allow these heavy vehicles controlled by human operators to perform intervention tasks, underwater structures like observatory facilities, subsea panels or oil-well Christmas trees have been adapted, making them more robust and easier to operate. The TRITON Spanish founded project proposes the use of a light-weight intervention AUV (I-AUV) to carry out intervention applications simplifying the adaptation of these underwater structures and drastically reducing the operational cost. To prove this concept, the Girona 500 I-AUV is used to autonomously dock into an adapted subsea panel and once docked perform an intervention composed of turning a valve and plugging in/unplugging a connector. The techniques used for the autonomous docking and manipulation as well as the design of an adapted subsea panel with a funnel-based docking system are presented in this article together with the results achieved in a water tank and at sea.This work was supported by the Spanish project DPI2014-57746-C3 (MERBOTS Project) and by Generalitat Valenciana under Grant GVA-PROMETEO/2016/066. The University of Girona wants to thank the SARTI group for their collaboration with the TRITON project