Multisource Self-calibration for Sensor Arrays

Calibration of a sensor array is more involved if the antennas have direction dependent gains and multiple calibrator sources are simultaneously present. We study this case for a sensor array with arbitrary geometry but identical elements, i.e. elements with the same direction dependent gain pattern. A weighted alternating least squares (WALS) algorithm is derived that iteratively solves for the direction independent complex gains of the array elements, their noise powers and their gains in the direction of the calibrator sources. An extension of the problem is the case where the apparent calibrator source locations are unknown, e.g., due to refractive propagation paths. For this case, the WALS method is supplemented with weighted subspace fitting (WSF) direction finding techniques. Using Monte Carlo simulations we demonstrate that both methods are asymptotically statistically efficient and converge within two iterations even in cases of low SNR.Comment: 11 pages, 8 figure

Robust approaches to remote calibration of a transmitting array

We consider the problem of estimating the gains and phases of the RF channels of a M-element transmitting array, based on a calibration procedure where M orthogonal signals are sent through M orthogonal beams and received on a single antenna. The received data vector obeys a linear model of the type y ¼ AFg þ n where A is an unknown complex scalar accounting for propagation loss and g is the vector of unknown complex gains. In order to improve the performance of the least-squares (LS) estimator at low signal to noise ratio (SNR), we propose to exploit knowledge of the nominal value of g, viz g. Towards this end, two approaches are presented. First, a Bayesian approach is advocated where A and g are considered as random variables, with a non-informative prior distribution for A and a Gaussian prior distribution for g. The posterior distributions of the unknown random variables are derived and a Gibbs sampling strategy is presented that enables one to generate samples distributed according to these posterior distributions, leading to the minimum mean-square error (MMSE) estimator. A second approach consists in solving a constrained least-squares problem in which h ¼ Ag is constrained to be close to a scaled version of g. This second approach yields a closed-form solution, which amounts to a linear combination of g and the LS estimator. Numerical simulations show that the two new estimators significantly outperform the conventional LS estimator, especially at low SNR

Source bearing and steering-vector estimation using partially calibrated arrays

The problem of source direction-of-arrival (DOA) estimation using a sensor array is addressed, where some of the sensors are perfectly calibrated, while others are uncalibrated. An algorithm is proposed for estimating the source directions in addition to the estimation of unknown array parameters such as sensor gains and phases, as a way of performing array self-calibration. The cost function is an extension of the maximum likelihood (ML) criteria that were originally developed for DOA estimation with a perfectly calibrated array. A particle swarm optimization (PSO) algorithm is used to explore the high-dimensional problem space and find the global minimum of the cost function. The design of the PSO is a combination of the problem-independent kernel and some newly introduced problem-specific features such as search space mapping, particle velocity control, and particle position clipping. This architecture plus properly selected parameters make the PSO highly flexible and reusable, while being sufficiently specific and effective in the current application. Simulation results demonstrate that the proposed technique may produce more accurate estimates of the source bearings and unknown array parameters in a cheaper way as compared with other popular methods, with the root-mean-squared error (RMSE) approaching and asymptotically attaining the Cramer Rao bound (CRB) even in unfavorable conditions

Direction finding with partly calibrated uniform linear arrays

A new method for direction finding with partly calibrated uniform linear arrays (ULAs) is presented. It is based on the conventional estimation of signal parameters via rotational invariance techniques (ESPRIT) by modeling the imperfections of the ULAs as gain and phase uncertainties. For a fully calibrated array, it reduces to the conventional ESPRIT algorithm. Moreover, the direction-of-arrivals (DOAs), unknown gains, and phases of the uncalibrated sensors can be estimated in closed form without performing a spectral search. Hence, it is computationally very attractive. The Cramér-Rao bounds (CRBs) of the partly calibrated ULAs are also given. Simulation results show that the root mean squared error (RMSE) performance of the proposed algorithm is better than the conventional methods when the number of uncalibrated sensors is large. It also achieves satisfactory performance even at low signal-to-noise ratios (SNRs). © 2011 IEEE.published_or_final_versio

DOA estimation and tracking of ULAs with mutual coupling

A class of subspace-based methods for direction-of-arrival (DOA) estimation and tracking in the case of uniform linear arrays (ULAs) with mutual coupling is proposed. By treating the angularly-independent mutual coupling as angularly-dependent complex array gains, the middle subarray is found to have the same complex array gains. Using this property, a new way for parameterizing the steering vector is proposed and the corresponding method for joint estimation of DOAs and mutual coupling matrix (MCM) using the whole array data is derived based on subspace principle. Simulation results show that the proposed algorithm has a better performance than the conventional subarray-based method especially for weak signals. Furthermore, to achieve low computational complexity for online and time-varying DOA estimation, three subspace tracking algorithms with different arithmetic complexities and tracking abilities are developed. More precisely, by introducing a better estimate of the subspace to the conventional tracking algorithms, two modified methods, namely modified projection approximate subspace tracking (PAST) (MPAST) and modified orthonormal PAST (MOPAST), are developed for slowly changing subspace, whereas a Kalman filter with a variable number of measurements (KFVM) method for rapidly changing subspace is introduced. Simulation results demonstrate that these algorithms offer high flexibility and effectiveness for tracking DOAs in the presence of mutual coupling. © 2006 IEEE.published_or_final_versio

Joint ML calibration and DOA estimation with separated arrays

This paper investigates parametric direction-of-arrival (DOA) estimation in a particular context: i) each sensor is characterized by an unknown complex gain and ii) the array consists of a collection of subarrays which are substantially separated from each other leading to a structured noise covariance matrix. We propose two iterative algorithms based on the maximum likelihood (ML) estimation method adapted to the context of joint array calibration and DOA estimation. Numerical simulations reveal that the two proposed schemes, the iterative ML (IML) and the modified iterative ML (MIML) algorithms for joint array calibration and DOA estimation, outperform the state of the art methods and the MIML algorithm reaches the Cram\'er-Rao bound for a low number of iterations