Micromachining

To present their work in the field of micromachining, researchers from distant parts of the world have joined their efforts and contributed their ideas according to their interest and engagement. Their articles will give you the opportunity to understand the concepts of micromachining of advanced materials. Surface texturing using pico- and femto-second laser micromachining is presented, as well as the silicon-based micromachining process for flexible electronics. You can learn about the CMOS compatible wet bulk micromachining process for MEMS applications and the physical process and plasma parameters in a radio frequency hybrid plasma system for thin-film production with ion assistance. Last but not least, study on the specific coefficient in the micromachining process and multiscale simulation of influence of surface defects on nanoindentation using quasi-continuum method provides us with an insight in modelling and the simulation of micromachining processes. The editors hope that this book will allow both professionals and readers not involved in the immediate field to understand and enjoy the topic

Essays on poverty issues: microeconomic evidence from african countries

Using household level panel data, the thesis provides comprehensive empirical evidence on poverty issues. The thesis constructs spatial and inter-temporal utility consistent poverty lines for Uganda, which are used as inputs to study the sources of poverty, distinguish chronic poverty from transitory poverty and the mechanisms affecting poverty persistence. Based on these poverty lines which are consistent across space and time, the poverty headcount in Uganda increases by about 9% as one moves from 2005 to 2009. In contrast, the official report suggests a reduction in poverty headcount by about 4.5% which is mainly due to low food and non-food consumer price indexes and low food share. Poverty in Uganda is largely chronic. The highest burden of inter-temporal poverty ascribes to households living in the North. Households with a large number of dependent members contribute to inter-temporal poverty more than their population share. The thesis estimates the dynamic random effect probit models and endogenous switching regression. After controlling for observed and unobserved differences in individual characteristics, the thesis still finds strong evidence of state dependence, which is that past poverty actually increases the risk of future poverty. In the presence of genuine state dependence, short run polices are effective. Since consumption in the household surveys is often measured with error, the thesis applies the mixed latent Markov model to estimate the extent of true mobility into and out of poverty. It finds that measurement error overstates the observed poverty transition probabilities or understates the true poverty persistence. Since the actual poverty persistence rate is at least 61%, the poverty in Uganda is largely permanent, not transitory. Measurement error also understates the impacts of observed individual characteristics on making poverty transition from one state to another. Land size per capita, having mobile phone and TV-radio reduce the probability of transiting into poverty as well as increase the chances of poverty exit. The empirical evidence suggests that policy makers have to target households whose consumption slightly above the poverty line and households who are very poor. Since poverty is state dependence, short run policies are effective to keep individuals not to fall into poverty in the first place because once they are poor, they are less likely to exit poverty. Since poverty is mainly chronic in Uganda, on the other hand, long term intervention through increasing human and physical capital and the returns to these assets is effective to the very poor households. Using employer- employee panel data from Ghana, the thesis also finds that poor women are disproportionately sorting into low paying firms. Even after controlling for gender difference in individuals endowments and sorting effects, firms actually pay different wage premium for comparable female and male. When wage inequality increases among the poor, chronic poverty increases. The result suggests that targeting female dominant firms to increase their productivity helps mitigate the national level chronic poverty. The thesis also identifies the type of firms that pay equal premium for comparable gender attributes

Latest Advancements in Micro Nano Molding Technologies – Process Developments and Optimization, Materials, Applications, Key Enabling Technologies

Micro- and nano-molding technologies are continuously being developed due to enduring trends like increasing miniaturization and higher functional integration of products, devices, and systems. Furthermore, with the introduction of higher performance polymers, feedstocks, and composites, new opportunities in terms of material properties can be exploited, and, consequently, more micro-products and micro/nano-structured surfaces are currently being designed and manufactured.Innovations in micro- and nano-molding techniques are seen in the different processes employed in production (injection molding, micro injection molding, etc.); on the use of new and functional materials; for an ever-increasing number of applications (health-care devices, micro-implants, mobility, and communications products, optical elements, micro-electromechanical systems, sensors, etc.); in several key enabling technologies that support the successful realization of micro and nano molding processes (micro- and nano-tooling technologies, process monitoring techniques, micro- and nanometrology methods for quality control, simulation, etc.) and their integration into new manufacturing process chains.This Special Issue reprint showcases research papers and review articles that focus on the latest developments in micro-manufacturing and key enabling technologies for the production of both micro-products and micro-structured surfaces

Advanced Sensing, Fault Diagnostics, and Structural Health Management

Advanced sensing, fault diagnosis, and structural health management are important parts of the maintenance strategy of modern industries. With the advancement of science and technology, modern structural and mechanical systems are becoming more and more complex. Due to the continuous nature of operation and utilization, modern systems are heavily susceptible to faults. Hence, the operational reliability and safety of the systems can be greatly enhanced by using the multifaced strategy of designing novel sensing technologies and advanced intelligent algorithms and constructing modern data acquisition systems and structural health monitoring techniques. As a result, this research domain has been receiving a significant amount of attention from researchers in recent years. Furthermore, the research findings have been successfully applied in a wide range of fields such as aerospace, manufacturing, transportation and processes

Drone-based Integration of Hyperspectral Imaging and Magnetics for Mineral Exploration

The advent of unoccupied aerial systems (UAS) as disruptive technology has a lasting impact on remote sensing, geophysics and most geosciences. Small, lightweight, and low-cost UAS enable researchers and surveyors to acquire earth observation data in higher spatial and spectral resolution as compared to airborne and satellite data. UAS-based applications range from rapid topographic mapping using photogrammetric techniques to hyperspectral and geophysical measurements of surface and subsurface geology. UAS surveys contribute to identifying metal deposits, monitoring of mine sites and can reveal arising environmental issues associated with mining. Further, affordable UAS technology will boost exploration data availability and expertise in the global south. This thesis investigates the application of UAS-based multi-sensor data for mineral exploration, in particular the integration of hyperspectral imagers, magnetometers and digital cameras (covering the visible red, green, blue light spectrum). UAS-based research is maturing, however the aforementioned methods are not unified effectively. RGB-based photogrammetry is used to investigate topography and surface texture. Image spectrometers measure mineral-specific surface signatures. Magnetometers detect geomagnetic field changes caused by magnetic minerals at surface and depth. The integration of such UAS sensor-based methods in this thesis augments exploration potential with non-invasive, high-resolution, safe, rapid and practical survey methods. UAS-based surveying acquired, processed and integrated data from three distinct test sites. The sites are located in Finland (Fe-Ti-V at Otanmäki; apatite at Siilinjärvi) and Greenland (Ni-Cu-PGE at Qullissat, Disko Island) and were chosen as geologically diverse areas in subarctic to arctic environments. Restricted accessibility, unfavourable atmospheric conditions, dark rocks, debris and vegetation cover and low solar illumination were common features. While the topography in Finland was moderately flat, a steep landscape challenged the Greenland field work. These restraints meant that acquisitions varied from site to site and how data was integrated and interpreted is dependent on the commodity of interest. Iron-based spectral absorption and magnetic mineral response were detected using hyperspectral and magnetic surveying in Otanmäki. Multi-sensor-based image feature detection and classification combined with magnetic forward modelling enabled seamless geologic mapping in Siilinjärvi. Detailed magnetic inversion and multispectral photogrammetry led to the construction of a comprehensive 3D model of magmatic exploration targets in Greenland. Ground truth at different intensity was employed to verify UAS-based data interpretations during all case studies. Laboratory analysis was applied when deemed necessary to acquire geologic-mineralogic validation (e.g., X-ray diffraction and optical microscopy for mineral identification to establish lithologic domains, magnetic susceptibility measurements for subsurface modelling), for example for trace amounts of magnetite in carbonatite (Siilinjärvi) and native iron occurrence in basalt (Qullissat). Technical achievements were the integration of a multicopter-based prototype fluxgate-magnetometer data from different survey altitudes with ground truth, and a feasibility study with a high-speed multispectral image system for fixed-wing UAS. The employed case studies transfer the experiences made towards general recommendations for UAS application-based multi-sensor integration. This thesis highlights the feasibility of UAS-based surveying at target scale (1–50 km2) and solidifies versatile survey approaches for multi-sensor integration.Ziel dieser Arbeit war es, das Potenzial einer Drohnen-basierten Mineralexploration mit Multisensor-Datenintegration unter Verwendung optisch-spektroskopischer und magnetischer Methoden zu untersuchen, um u. a. übertragbare Arbeitsabläufe zu erstellen. Die untersuchte Literatur legt nahe, dass Drohnen-basierte Bildspektroskopie und magnetische Sensoren ein ausgereiftes technologisches Niveau erreichen und erhebliches Potenzial für die Anwendungsentwicklung bieten, aber es noch keine ausreichende Synergie von hyperspektralen und magnetischen Methoden gibt. Diese Arbeit umfasste drei Fallstudien, bei denen die Drohnengestützte Vermessung von geologischen Zielen in subarktischen bis arktischen Regionen angewendet wurde. Eine Kombination von Drohnen-Technologie mit RGB, Multi- und Hyperspektralkameras und Magnetometern ist vorteilhaft und schuf die Grundlage für eine integrierte Modellierung in den Fallstudien. Die Untersuchungen wurden in einem Gelände mit flacher und zerklüfteter Topografie, verdeckten Zielen und unter oft schlechten Lichtverhältnissen durchgeführt. Unter diesen Bedingungen war es das Ziel, die Anwendbarkeit von Drohnen-basierten Multisensordaten in verschiedenen Explorationsumgebungen zu bewerten. Hochauflösende Oberflächenbilder und Untergrundinformationen aus der Magnetik wurden fusioniert und gemeinsam interpretiert, dabei war eine selektive Gesteinsprobennahme und Analyse ein wesentlicher Bestandteil dieser Arbeit und für die Validierung notwendig. Für eine Eisenerzlagerstätte wurde eine einfache Ressourcenschätzung durchgeführt, indem Magnetik, bildspektroskopisch-basierte Indizes und 2D-Strukturinterpretation integriert wurden. Fotogrammetrische 3D-Modellierung, magnetisches forward-modelling und hyperspektrale Klassifizierungen wurden für eine Karbonatit-Intrusion angewendet, um einen kompletten Explorationsabschnitt zu erfassen. Eine Vektorinversion von magnetischen Daten von Disko Island, Grönland, wurden genutzt, um großräumige 3D-Modelle von undifferenzierten Erdrutschblöcken zu erstellen, sowie diese zu identifizieren und zu vermessen. Die integrierte spektrale und magnetische Kartierung in komplexen Gebieten verbesserte die Erkennungsrate und räumliche Auflösung von Erkundungszielen und reduzierte Zeit, Aufwand und benötigtes Probenmaterial für eine komplexe Interpretation. Der Prototyp einer Multispektralkamera, gebaut für eine Starrflügler-Drohne für die schnelle Vermessung, wurde entwickelt, erfolgreich getestet und zum Teil ausgewertet. Die vorgelegte Arbeit zeigt die Vorteile und Potenziale von Multisensor-Drohnen als praktisches, leichtes, sicheres, schnelles und komfortabel einsetzbares geowissenschaftliches Werkzeug, um digitale Modelle für präzise Rohstofferkundung und geologische Kartierung zu erstellen

Mathematical Problems in Rock Mechanics and Rock Engineering

With increasing requirements for energy, resources and space, rock engineering projects are being constructed more often and are operated in large-scale environments with complex geology. Meanwhile, rock failures and rock instabilities occur more frequently, and severely threaten the safety and stability of rock engineering projects. It is well-recognized that rock has multi-scale structures and involves multi-scale fracture processes. Meanwhile, rocks are commonly subjected simultaneously to complex static stress and strong dynamic disturbance, providing a hotbed for the occurrence of rock failures. In addition, there are many multi-physics coupling processes in a rock mass. It is still difficult to understand these rock mechanics and characterize rock behavior during complex stress conditions, multi-physics processes, and multi-scale changes. Therefore, our understanding of rock mechanics and the prevention and control of failure and instability in rock engineering needs to be furthered. The primary aim of this Special Issue “Mathematical Problems in Rock Mechanics and Rock Engineering” is to bring together original research discussing innovative efforts regarding in situ observations, laboratory experiments and theoretical, numerical, and big-data-based methods to overcome the mathematical problems related to rock mechanics and rock engineering. It includes 12 manuscripts that illustrate the valuable efforts for addressing mathematical problems in rock mechanics and rock engineering

Geodetic monitoring of complex shaped infrastructures using Ground-Based InSAR

In the context of climate change, alternatives to fossil energies need to be used as much as possible to produce electricity. Hydroelectric power generation through the utilisation of dams stands out as an exemplar of highly effective methodologies in this endeavour. Various monitoring sensors can be installed with different characteristics w.r.t. spatial resolution, temporal resolution and accuracy to assess their safe usage. Among the array of techniques available, it is noteworthy that ground-based synthetic aperture radar (GB-SAR) has not yet been widely adopted for this purpose. Despite its remarkable equilibrium between the aforementioned attributes, its sensitivity to atmospheric disruptions, specific acquisition geometry, and the requisite for phase unwrapping collectively contribute to constraining its usage. Several processing strategies are developed in this thesis to capitalise on all the opportunities of GB-SAR systems, such as continuous, flexible and autonomous observation combined with high resolutions and accuracy. The first challenge that needs to be solved is to accurately localise and estimate the azimuth of the GB-SAR to improve the geocoding of the image in the subsequent step. A ray tracing algorithm and tomographic techniques are used to recover these external parameters of the sensors. The introduction of corner reflectors for validation purposes confirms a significant error reduction. However, for the subsequent geocoding, challenges persist in scenarios involving vertical structures due to foreshortening and layover, which notably compromise the geocoding quality of the observed points. These issues arise when multiple points at varying elevations are encapsulated within a singular resolution cell, posing difficulties in pinpointing the precise location of the scattering point responsible for signal return. To surmount these hurdles, a Bayesian approach grounded in intensity models is formulated, offering a tool to enhance the accuracy of the geocoding process. The validation is assessed on a dam in the black forest in Germany, characterised by a very specific structure. The second part of this thesis is focused on the feasibility of using GB-SAR systems for long-term geodetic monitoring of large structures. A first assessment is made by testing large temporal baselines between acquisitions for epoch-wise monitoring. Due to large displacements, the phase unwrapping can not recover all the information. An improvement is made by adapting the geometry of the signal processing with the principal component analysis. The main case study consists of several campaigns from different stations at Enguri Dam in Georgia. The consistency of the estimated displacement map is assessed by comparing it to a numerical model calibrated on the plumblines data. It exhibits a strong agreement between the two results and comforts the usage of GB-SAR for epoch-wise monitoring, as it can measure several thousand points on the dam. It also exhibits the possibility of detecting local anomalies in the numerical model. Finally, the instrument has been installed for continuous monitoring for over two years at Enguri Dam. An adequate flowchart is developed to eliminate the drift happening with classical interferometric algorithms to achieve the accuracy required for geodetic monitoring. The analysis of the obtained time series confirms a very plausible result with classical parametric models of dam deformations. Moreover, the results of this processing strategy are also confronted with the numerical model and demonstrate a high consistency. The final comforting result is the comparison of the GB-SAR time series with the output from four GNSS stations installed on the dam crest. The developed algorithms and methods increase the capabilities of the GB-SAR for dam monitoring in different configurations. It can be a valuable and precious supplement to other classical sensors for long-term geodetic observation purposes as well as short-term monitoring in cases of particular dam operations

Multi-beam miniaturized volumetric scanning microscopy with a single 1-dimensional actuation

Miniaturized optical imaging systems often use a 2-dimensional (2-D) actuator such as a piezoelectric tube or microelectromechanical system actuator for the acquisition of 2-D and higher dimensional images over an areal field of view (FOV). Piezoelectric tubes are the most compact, but usually produce impractical sub-millimetre FOVs and are difficult to fabricate at scale, leading to high costs. Planar piezoelectric bending actuators ('benders') are substantially lower cost and capable of much larger actuations, albeit 1-dimensional (1-D) and traditionally inadequate for 2-D steering tasks. We present a piezoelectric bender imaging system that exploits mechanical motion coupling to produce multi-millimetre scale 2-D scan coverage. Leveraging optical coherence tomography with a long coherence length laser, we further extend the FOV using three depth-multiplexed imaging beams from optical fibres resonating in synchronicity across the width of the bender. Each fibre had a FOV of ~2.1 x 1.5 mm, contributing to a stitched field of ~2.1 x 2.9 mm with a beam resolution of 12.6 um full-width at half-maximum. Imaging of biological samples including stomach tissue, an ant and cell spheroids was performed. This multi-fold improvement in imaging coverage and cost-effectiveness promises to accelerate the advent of piezoelectric scanning in compact devices such as endoscopes for biomedicine, and headsets for augmented/virtual reality and neuroscience