Knowledge representation into Ada parallel processing

The Knowledge Representation into Ada Parallel Processing project is a joint NASA and Air Force funded project to demonstrate the execution of intelligent systems in Ada on the Charles Stark Draper Laboratory fault-tolerant parallel processor (FTPP). Two applications were demonstrated - a portion of the adaptive tactical navigator and a real time controller. Both systems are implemented as Activation Framework Objects on the Activation Framework intelligent scheduling mechanism developed by Worcester Polytechnic Institute. The implementations, results of performance analyses showing speedup due to parallelism and initial efficiency improvements are detailed and further areas for performance improvements are suggested

Scratchpad Management in Software Managed Manycore Architectures

abstract: Caches have long been used to reduce memory access latency. However, the increased complexity of cache coherence brings significant challenges in processor design as the number of cores increases. While making caches scalable is still an important research problem, some researchers are exploring the possibility of a more power-efficient SRAM called scratchpad memories or SPMs. SPMs consume significantly less area, and are more energy-efficient per access than caches, and therefore make the design of on-chip memories much simpler. Unlike caches, which fetch data from memories automatically, an SPM requires explicit instructions for data transfers. SPM-only architectures are thus named as software managed manycore (SMM), since the data movements of such architectures rely on software. SMM processors have been widely used in different areas, such as embedded computing, network processing, or even high performance computing. While SMM processors provide a low-power platform, the hardware alone does not guarantee power efficiency, if applications on such processors deliver low performance. Efficient software techniques are therefore required. A big body of management techniques for SMM architectures are compiler-directed, as inserting data movement operations by hand forces programmers to trace flow of data, which can be error-prone and sometimes difficult if not impossible. This thesis develops compiler-directed techniques to manage data transfers for embedded applications on SMMs efficiently. The techniques analyze and find out the proper program points and insert data movement instructions accordingly. The techniques manage code, stack and heap data of applications, and reduce execution time by 14%, 52% and 80% respectively compared to their predecessors on typical embedded applications. On top of managing local data, a technique is also developed for shared data in SMM architectures. Experimental results show it achieves more than 2X speedup than the previous technique on average.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Compiler and Runtime for Memory Management on Software Managed Manycore Processors

abstract: We are expecting hundreds of cores per chip in the near future. However, scaling the memory architecture in manycore architectures becomes a major challenge. Cache coherence provides a single image of memory at any time in execution to all the cores, yet coherent cache architectures are believed will not scale to hundreds and thousands of cores. In addition, caches and coherence logic already take 20-50% of the total power consumption of the processor and 30-60% of die area. Therefore, a more scalable architecture is needed for manycore architectures. Software Managed Manycore (SMM) architectures emerge as a solution. They have scalable memory design in which each core has direct access to only its local scratchpad memory, and any data transfers to/from other memories must be done explicitly in the application using Direct Memory Access (DMA) commands. Lack of automatic memory management in the hardware makes such architectures extremely power-efficient, but they also become difficult to program. If the code/data of the task mapped onto a core cannot fit in the local scratchpad memory, then DMA calls must be added to bring in the code/data before it is required, and it may need to be evicted after its use. However, doing this adds a lot of complexity to the programmer's job. Now programmers must worry about data management, on top of worrying about the functional correctness of the program - which is already quite complex. This dissertation presents a comprehensive compiler and runtime integration to automatically manage the code and data of each task in the limited local memory of the core. We firstly developed a Complete Circular Stack Management. It manages stack frames between the local memory and the main memory, and addresses the stack pointer problem as well. Though it works, we found we could further optimize the management for most cases. Thus a Smart Stack Data Management (SSDM) is provided. In this work, we formulate the stack data management problem and propose a greedy algorithm for the same. Later on, we propose a general cost estimation algorithm, based on which CMSM heuristic for code mapping problem is developed. Finally, heap data is dynamic in nature and therefore it is hard to manage it. We provide two schemes to manage unlimited amount of heap data in constant sized region in the local memory. In addition to those separate schemes for different kinds of data, we also provide a memory partition methodology.Dissertation/ThesisPh.D. Computer Science 201

Power-Efficient and Low-Latency Memory Access for CMP Systems with Heterogeneous Scratchpad On-Chip Memory

The gradually widening speed disparity of between CPU and memory has become an overwhelming bottleneck for the development of Chip Multiprocessor (CMP) systems. In addition, increasing penalties caused by frequent on-chip memory accesses have raised critical challenges in delivering high memory access performance with tight power and latency budgets. To overcome the daunting memory wall and energy wall issues, this thesis focuses on proposing a new heterogeneous scratchpad memory architecture which is configured from SRAM, MRAM, and Z-RAM. Based on this architecture, we propose two algorithms, a dynamic programming and a genetic algorithm, to perform data allocation to different memory units, therefore reducing memory access cost in terms of power consumption and latency. Extensive and intensive experiments are performed to show the merits of the heterogeneous scratchpad architecture over the traditional pure memory system and the effectiveness of the proposed algorithms

WCET-Directed Dynamic Scratchpad Memory Allocation of Data

Many embedded systems feature processors coupled with a small and fast scratchpad memory. To the difference with caches, allocation of data to scratchpad memory must be handled by software. The major gain is to enhance the pre-dictability of memory accesses latencies. A compile-time dy-namic allocation approach enables eviction and placement of data to the scratchpad memory at runtime. Previous dynamic scratchpad memory allocation ap-proaches aimed to reduce average-case program execution time or the energy consumption due to memory accesses. For real-time systems, worst-case execution time is the main metric to optimize. In this paper, we propose a WCET-directed algorithm to dynamically allocate static data and stack data of a pro-gram to scratchpad memory. The granularity of placement of memory transfers (e.g. on function, basic block bound-aries) is discussed from the perspective of its computation complexity and the quality of allocation. 1

Optimizing the flash-RAM energy trade-off in deeply embedded systems

Deeply embedded systems often have the tightest constraints on energy consumption, requiring that they consume tiny amounts of current and run on batteries for years. However, they typically execute code directly from flash, instead of the more energy efficient RAM. We implement a novel compiler optimization that exploits the relative efficiency of RAM by statically moving carefully selected basic blocks from flash to RAM. Our technique uses integer linear programming, with an energy cost model to select a good set of basic blocks to place into RAM, without impacting stack or data storage. We evaluate our optimization on a common ARM microcontroller and succeed in reducing the average power consumption by up to 41% and reducing energy consumption by up to 22%, while increasing execution time. A case study is presented, where an application executes code then sleeps for a period of time. For this example we show that our optimization could allow the application to run on battery for up to 32% longer. We also show that for this scenario the total application energy can be reduced, even if the optimization increases the execution time of the code

PYDAC: A DISTRIBUTED RUNTIME SYSTEM AND PROGRAMMING MODEL FOR A HETEROGENEOUS MANY-CORE ARCHITECTURE

Heterogeneous many-core architectures that consist of big, fast cores and small, energy-efficient cores are very promising for future high-performance computing (HPC) systems. These architectures offer a good balance between single-threaded perfor- mance and multithreaded throughput. Such systems impose challenges on the design of programming model and runtime system. Specifically, these challenges include (a) how to fully utilize the chip’s performance, (b) how to manage heterogeneous, un- reliable hardware resources, and (c) how to generate and manage a large amount of parallel tasks. This dissertation proposes and evaluates a Python-based programming framework called PyDac. PyDac supports a two-level programming model. At the high level, a programmer creates a very large number of tasks, using the divide-and-conquer strategy. At the low level, tasks are written in imperative programming style. The runtime system seamlessly manages the parallel tasks, system resilience, and inter- task communication with architecture support. PyDac has been implemented on both an field-programmable gate array (FPGA) emulation of an unconventional het- erogeneous architecture and a conventional multicore microprocessor. To evaluate the performance, resilience, and programmability of the proposed system, several micro-benchmarks were developed. We found that (a) the PyDac abstracts away task communication and achieves programmability, (b) the micro-benchmarks are scalable on the hardware prototype, but (predictably) serial operation limits some micro-benchmarks, and (c) the degree of protection versus speed could be varied in redundant threading that is transparent to programmers

Heap Data Allocation to Scratch-Pad Memory in Embedded Systems

This thesis presents the first-ever compile-time method for allocating a portion of a program's dynamic data to scratch-pad memory. A scratch-pad is a fast directly addressed compiler-managed SRAM memory that replaces the hardware-managed cache. It is motivated by its better real-time guarantees vs cache and by its significantly lower overheads in access time, energy consumption, area and overall runtime. Dynamic data refers to all objects allocated at run-time in a program, as opposed to static data objects which are allocated at compile-time. Existing compiler methods for allocating data to scratch-pad are able to place only code, global and stack data (static data) in scratch-pad memory; heap and recursive-function objects(dynamic data) are allocated entirely in DRAM, resulting in poor performance for these dynamic data types. Runtime methods based on software caching can place data in scratch-pad, but because of their high overheads from software address translation, they have not been successful, especially for dynamic data. In this thesis we present a dynamic yet compiler-directed allocation method for dynamic data that for the first time, (i) is able to place a portion of the dynamic data in scratch-pad; (ii) has no software-caching tags; (iii) requires no run-time per-access extra address translation; and (iv) is able to move dynamic data back and forth between scratch-pad and DRAM to better track the program's locality characteristics. With our method, code, global, stack and heap variables can share the same scratch-pad. When compared to placing all dynamic data variables in DRAM and only static data in scratch-pad, our results show that our method reduces the average runtime of our benchmarks by 22.3%, and the average power consumption by 26.7%, for the same size of scratch-pad fixed at 5% of total data size. Significant savings in runtime and energy across a large number of benchmarks were also observed when compared against cache memory organizations, showing our method's success under constrained SRAM sizes when dealing with dynamic data. Lastly, our method is able to minimize the profile dependence issues which plague all similar allocation methods through careful analysis of static and dynamic profile information

Compiler-Decided Dynamic Memory Allocation for Scratch-Pad Based Embedded Systems

In this research we propose a highly predictable, low overhead and yet dynamic, memory allocation strategy for embedded systems with scratch-pad memory. A scratch-pad is a fast compiler-managed SRAM memory that replaces the hardware-managed cache. It is motivated by its better real-time guarantees vs cache and by its significantly lower overheads in energy consumption, area and overall runtime, even with a simple allocation scheme. Scratch-pad allocation methods primarily are of two types. First, software-caching schemes emulate the workings of a hardware cache in software. Instructions are inserted before each load/store to check the software-maintained cache tags. Such methods incur large overheads in runtime, code size, energy consumption and SRAM space for tags and deliver poor real-time guarantees, just like hardware caches. A second category of algorithms partitions variables at compile-time into the two banks. However, a drawback of such static allocation schemes is that they do not account for dynamic program behavior. We propose a dynamic allocation methodology for global and stack data and program code that (i) accounts for changing program requirements at runtime (ii) has no software-caching tags (iii) requires no run-time checks (iv) has extremely low overheads, and (v) yields 100% predictable memory access times. In this method data that is about to be accessed frequently is copied into the scratch-pad using compiler-inserted code at fixed and infrequent points in the program. Earlier data is evicted if necessary. When compared to an existing static allocation scheme, results show that our scheme reduces runtime by up to 39.8% and energy by up to 31.3% on average for our benchmarks, depending on the SRAM size used. The actual gain depends on the SRAM size, but our results show that close to the maximum benefit in run-time and energy is achieved for a substantial range of small SRAM sizes commonly found in embedded systems. Our comparison with a direct mapped cache shows that our method performs roughly as well as a cached architecture in runtime and energy while delivering better real-time benefits

Dynamic code mapping for limited local memory systems

Abstract—This paper presents heuristics for dynamic man-agement of application code on limited local memories present in high-performance multi-core processors. Previous techniques formulate the problem using call graphs, which do not capture the temporal ordering of functions. In addition, they only use a conservative estimate of the interference cost between functions to obtain a mapping. As a result previous techniques are unable to achieve efficient code mapping. Techniques proposed in this paper overcome both these limitations and achieve superior code mapping. Experimental results from executing benchmarks from MiBench onto the Cell processor in the Sony Playstation 3 demonstrate upto 29 % and average 12 % performance improve-ment, at tolerable compile-time overhead. I