Obstacle Avoidance Based on Stereo Vision Navigation System for Omni-directional Robot

This paper addresses the problem of obstacle avoidance in mobile robot navigation systems. The navigation system is considered very important because the robot must be able to be controlled from its initial position to its destination without experiencing a collision. The robot must be able to avoid obstacles and arrive at its destination. Several previous studies have focused more on predetermined stationary obstacles. This has resulted in research results being difficult to apply in real environmental conditions, whereas in real conditions, obstacles can be stationary or moving caused by changes in the walking environment. The objective of this study is to address the robot’s navigation behaviors to avoid obstacles. In dealing with complex problems as previously described, a control system is designed using Neuro-Fuzzy so that the robot can avoid obstacles when the robot moves toward the destination. This paper uses ANFIS for obstacle avoidance control. The learning model used is offline learning. Mapping the input and output data is used in the initial step. Then the data is trained to produce a very small error. To support the movement of the robot so that it is more flexible and smoother in avoiding obstacles and can identify objects in real-time, a three wheels omnidirectional robot is used equipped with a stereo vision sensor. The contribution is to advance state of the art in obstacle avoidance for robot navigation systems by exploiting ANFIS with target-and-obstacles detection based on stereo vision sensors. This study tested the proposed control method by using 15 experiments with different obstacle setup positions. These scenarios were chosen to test the ability to avoid moving obstacles that may come from the front, the right, or the left of the robot. The robot moved to the left or right of the obstacles depending on the given Vy speed. After several tests with different obstacle positions, the robot managed to avoid the obstacle when the obstacle distance ranged from 173 – 150 cm with an average speed of Vy 274 mm/s. In the process of avoiding obstacles, the robot still calculates the direction in which the robot is facing the target until the target angle is 0

Design, Construction, Energy Modeling, and Navigation of a Six-Wheeled Differential Drive Robot to Deliver Medical Supplies inside Hospitals

Differential drive mobile robots have been the most ubiquitous kind of robots for the last few decades. As each of the wheels of a differential drive mobile robot can be controlled, it provides additional flexibility to the end-users in creating new applications. These applications include personal assistance, security, warehouse and distribution applications, ocean and space exploration, etc. In a clinic or hospital, the delivery of medicines and patients’ records are frequently needed activities. Medical personnel often find these activities repetitive and time-consuming. Our research was to design, construct, produce an energy model, and develop a navigation control method for a six-wheeled differential drive robot designed to deliver medical supplies inside the hospital. Such a robot is expected to lessen the workload of medical staff. Therefore, the design and implementation of a six-wheeled differential drive robot with a password-protected medicine carrier were presented. This password-protected medicine carrier ensures that only the authorized medical personnel can receive medical supplies. The low-cost robot base and the medicine carrier were built in real life. Besides the actual robot design and fabrication, a kinematic model for the robot was developed, and a navigation control algorithm to avoid obstacles was implemented using MATLAB/Simulink. The kinematic modeling is helpful for the robot to achieve better energy optimization. To develop the object avoidance algorithm, we investigated the use of the Robot Operating System (ROS) and the Simultaneous Localization and Mapping (SLAM) algorithm for the implementation of the mapping and navigation of a robotic platform named TurtleBot 2. Finally, using the Webot robot simulator, the navigation of the six-wheeled mobile robot was demonstrated in a hospital-like simulation environment

SAFETY-GUARANTEED TASK PLANNING FOR BIPEDAL NAVIGATION IN PARTIALLY OBSERVABLE ENVIRONMENTS

Bipedal robots are becoming more capable as basic hardware and control challenges are being overcome, however reasoning about safety at the task and motion planning levels has been largely underexplored. I would like to make key steps towards guaranteeing safe locomotion in cluttered environments in the presence of humans or other dynamic obstacles by designing a hierarchical task planning framework that incorporates safety guarantees at each level. This layered planning framework is composed of a coarse high-level symbolic navigation planner and a lower-level local action planner. A belief abstraction at the global navigation planning level enables belief estimation of non-visible dynamic obstacle states and guarantees navigation safety with collision avoidance. Both planning layers employ linear temporal logic for a reactive game synthesis between the robot and its environment while incorporating lower level safe locomotion keyframe policies into formal task specification design. The high-level symbolic navigation planner has been extended to leverage the capabilities of a heterogeneous multi-agent team to resolve environment assumption violations that appear at runtime. Modifications in the navigation planner in conjunction with a coordination layer allow each agent to guarantee immediate safety and eventual task completion in the presence of an assumption violation if another agent exists that can resolve said violation, e.g. a door is closed that another dexterous agent can open. The planning framework leverages the expressive nature and formal guarantees of LTL to generate provably correct controllers for complex robotic systems. The use of belief space planning for dynamic obstacle belief tracking and heterogeneous robot capabilities to assist one another when environment assumptions are violated allows the planning framework to reduce the conservativeness traditionally associated with using formal methods for robot planning.M.S

Controling of Mobile Agents using Intelligent Strategy

Robots are developed to carry out certain task to help the human beings. A robot carrying out a particular needed task has promising applications for the betterment of human society. So the control of their motion remains a vital part for a robot. In this project, I have to develop the simulation of mobile agents (robots) in an arena of obstacles from a start point to a destination point without collision. So in a way this project deals with successful navigation of robots in prior known environment. This document presents a computer vision method and related algorithms for the navigation of a robot in a static environment. Our environment is a simple white coloured area with coloured obstacles (circle with white colour, rectangles with orange colour, triangle with green colour and hexagon with pink colour which helps in identifying the obstacle) and robot is in a rectangular form. The agents starting point is in blue colour and the destination point is in red colour. This environment is input by the user with the starting point and the destination point. The data acquired from here is then used as an input for the program which controls the robot drive motion in graphic control window. Robot then tries to reach its destination avoiding obstacles in its path. The algorithm presented in this paper uses the distance transform methodology to generate paths for the robot to execute which are written in C++ compiler. These paper developments can also be applied to vehicles for collision free driving

A reactive method for collision avoidance in industrial environments

This paper presents a reactive method for collision avoidance with multiple aerial vehicles that has been applied in real time considering industrial environments. The proposed method is based on the 3D-Optimal Reciprocal Collision Avoidance algorithm. The main contribution of the proposed method is that it takes into consideration 3D modeled static obstacles. Therefore, it has been successfully applied in realistic industrial environments with the presence of complex static obstacles. Considerations of dynamic constraints of the aerial vehicles have been added. The algorithm has been integrated in ROS framework and tested in simulation. Several simulations with up to eight aerial vehicles have been performed, including long endurance cooperative missions. Finally, the second main contri- bution consists in the evaluation of several real ex- periments with up to four aerial vehicles which have been carried out in the testbed of the Center for Ad- vanced Technologies (CATEC) facilities. The aerial ve- hicles ew in the presence of static obstacles and avoided potential collisions by modifying the planned trajecto- ries in real-time.Comisión Europea P11-TIC-706

Navigation of Automatic Vehicle using AI Techniques

In the field of mobile robot navigation have been studied as important task for the new generation of mobile robot i.e. Corobot. For this mobile robot navigation has been viewed for unknown environment. We consider the 4-wheeled vehicle (Corobot) for Path Planning, an autonomous robot and an obstacle and collision avoidance to be used in sensor based robot. We propose that the predefined distance from the robot to target and make the robot follow the target at this distance and improve the trajectory tracking characteristics. The robot will then navigate among these obstacles without hitting them and reach the specified goal point. For these goal achieving we use different techniques radial basis function and back-propagation algorithm under the study of neural network. In this Corobot a robotic arm are assembled and the kinematic analyses of Corobot arm and help of Phidget Control Panel a wheeled to be moved in both forward and reverse direction by 2-motor controller have to be done. Under kinematic analysis propose the relationships between the positions and orientation of the links of a manipulator. In these studies an artificial techniques and their control strategy are shown with potential applications in the fields of industry, security, defense, investigation, and others. Here finally, the simulation result using the webot neural network has been done and this result is compared with experimental data for different training pattern