A Survey on Multihop Ad Hoc Networks for Disaster Response Scenarios

Disastrous events are one of the most challenging applications of multihop ad hoc networks due to possible damages of existing telecommunication infrastructure.The deployed cellular communication infrastructure might be partially or completely destroyed after a natural disaster. Multihop ad hoc communication is an interesting alternative to deal with the lack of communications in disaster scenarios. They have evolved since their origin, leading to differentad hoc paradigms such as MANETs, VANETs, DTNs, or WSNs.This paper presents a survey on multihop ad hoc network paradigms for disaster scenarios.It highlights their applicability to important tasks in disaster relief operations. More specifically, the paper reviews the main work found in the literature, which employed ad hoc networks in disaster scenarios.In addition, it discusses the open challenges and the future research directions for each different ad hoc paradigm

Towards reliable video transmission over sparse MANETs in emergencies

Video delivery in a mobile ad-hoc network that can be deployed by members of an emergency service in an incident zone is an appealing tool for emergency and rescue services, but has not been studied yet. In order to design and test a suitable solution, we have generated realistic evaluation scenarios by modeling fireman action plans and GPS traces from real situations. We propose an overlay network solution with routing and reliability mechanisms. The Emergency Overlay Routing (EOR) protocol is a reactive protocol integrated into a store-carry-forward architecture. It selects ferry nodes to transport video data from a camera in the Incident Area to the Incident Chief’s node, looking for the minimum delay, but reliable, candidate. We also propose a simple credit based mechanism (RTCP+) to improve the communication reliability. The evaluation of the whole system shows a great improvement against previous results and promising expectations

Towards reliable video transmission over sparse MANETs in emergencies

Video delivery in a mobile ad-hoc network that can be deployed by members of an emergency service in an incident zone is an appealing tool for emergency and rescue services, but has not been studied yet. In order to design and test a suitable solution, we have generated realistic evaluation scenarios by modeling fireman action plans and GPS traces from real situations. We propose an overlay network solution with routing and reliability mechanisms. The Emergency Overlay Routing (EOR) protocol is a reactive protocol integrated into a store-carry-forward architecture. It selects ferry nodes to transport video data from a camera in the Incident Area to the Incident Chief’s node, looking for the minimum delay, but reliable, candidate. We also propose a simple credit based mechanism (RTCP+) to improve the communication reliability. The evaluation of the whole system shows a great improvement against previous results and promising expectations

Communications in emergency and crisis situations

In emergency and crisis situations (ECS) like earthquakes, tsunamis, terrorist attacks, it is very important that communication facilities are operative to provide services both to rescue teams and civilians. In ECS it is very common that communication premises are often unable to provide services, either due to physical damages or traffic overload. In such a case there is the need for rapid reestablishment of communication services. In this paper the communication services that can be exploited for ECS mitigation are discussed. The usage scenarios of such services are studied. Following that and looking from a network perspective view an ECS communication network architecture is presented. This architecture aims to provide seamless interoperability of varies communication technologies often present in ECS to provide an ECS communication solution. © 2014 Springer International Publishing Switzerland

Self-organizing Network Optimization via Placement of Additional Nodes

Das Hauptforschungsgebiet des Graduiertenkollegs "International Graduate School on Mobile Communication" (GS Mobicom) der Technischen Universität Ilmenau ist die Kommunikation in Katastrophenszenarien. Wegen eines Desasters oder einer Katastrophe können die terrestrischen Elementen der Infrastruktur eines Kommunikationsnetzwerks beschädigt oder komplett zerstört werden. Dennoch spielen verfügbare Kommunikationsnetze eine sehr wichtige Rolle während der Rettungsmaßnahmen, besonders für die Koordinierung der Rettungstruppen und für die Kommunikation zwischen ihren Mitgliedern. Ein solcher Service kann durch ein mobiles Ad-Hoc-Netzwerk (MANET) zur Verfügung gestellt werden. Ein typisches Problem der MANETs ist Netzwerkpartitionierung, welche zur Isolation von verschiedenen Knotengruppen führt. Eine mögliche Lösung dieses Problems ist die Positionierung von zusätzlichen Knoten, welche die Verbindung zwischen den isolierten Partitionen wiederherstellen können. Hauptziele dieser Arbeit sind die Recherche und die Entwicklung von Algorithmen und Methoden zur Positionierung der zusätzlichen Knoten. Der Fokus der Recherche liegt auf Untersuchung der verteilten Algorithmen zur Bestimmung der Positionen für die zusätzlichen Knoten. Die verteilten Algorithmen benutzen nur die Information, welche in einer lokalen Umgebung eines Knotens verfügbar ist, und dadurch entsteht ein selbstorganisierendes System. Jedoch wird das gesamte Netzwerk hier vor allem innerhalb eines ganz speziellen Szenarios - Katastrophenszenario - betrachtet. In einer solchen Situation kann die Information über die Topologie des zu reparierenden Netzwerks im Voraus erfasst werden und soll, natürlich, für die Wiederherstellung mitbenutzt werden. Dank der eventuell verfügbaren zusätzlichen Information können die Positionen für die zusätzlichen Knoten genauer ermittelt werden. Die Arbeit umfasst eine Beschreibung, Implementierungsdetails und eine Evaluierung eines selbstorganisierendes Systems, welche die Netzwerkwiederherstellung in beiden Szenarien ermöglicht.The main research area of the International Graduate School on Mobile Communication (GS Mobicom) at Ilmenau University of Technology is communication in disaster scenarios. Due to a disaster or an accident, the network infrastructure can be damaged or even completely destroyed. However, available communication networks play a vital role during the rescue activities especially for the coordination of the rescue teams and for the communication between their members. Such a communication service can be provided by a Mobile Ad-Hoc Network (MANET). One of the typical problems of a MANET is network partitioning, when separate groups of nodes become isolated from each other. One possible solution for this problem is the placement of additional nodes in order to reconstruct the communication links between isolated network partitions. The primary goal of this work is the research and development of algorithms and methods for the placement of additional nodes. The focus of this research lies on the investigation of distributed algorithms for the placement of additional nodes, which use only the information from the nodes’ local environment and thus form a self-organizing system. However, during the usage specifics of the system in a disaster scenario, global information about the topology of the network to be recovered can be known or collected in advance. In this case, it is of course reasonable to use this information in order to calculate the placement positions more precisely. The work provides the description, the implementation details and the evaluation of a self-organizing system which is able to recover from network partitioning in both situations

H3N - Analysewerkzeuge für hybride Wegewahl in heterogenen, unterbrechungstoleranten Ad-Hoc-Netzen für Rettungskräfte

Rettungskräfte müssen unter widrigen Bedingungen zuverlässig kommunizieren können, um in Rettungseinsätzen effizient arbeiten zu können und somit Leben zu retten. Idealerweise ist dazu ein selbstorganisiertes Ad-Hoc-Netz notwendig, weil die Kommunikationsinfrastruktur ggf. beschädigt oder überlastet sein kann. Um die geforderte Robustheit der Kommunikation auch in Szenarien mit größeren zu überbrückenden Entfernungen zu gewährleisten, werden zusätzlich Mechanismen benötigt, die eine Unterbrechungstoleranz ermöglichen. Verzögerungstolerante Netze (engl. Delay Tolerant Networks, kurz: DTN) stellen solche Mechanismen bereit, erfordern aber zusätzliche Verzögerungen, die für Rettungskommunikation nachteilig sind. Deshalb werden intelligente hybride Wegewahlverfahren benötigt, um die Verzögerung durch DTN-Mechanismen zu begrenzen. Außerdem sollten entsprechende Verfahren heterogene Netze unterstützen. Das ermöglicht zusätzlich eine effizientere Weiterleitung durch die Nutzung von Geräten mit unterschiedlichen Kommunikationstechnologien und damit auch Reichweiten. Um solche Systeme und die dafür benötigten Kommunikationsprotokolle zu entwickeln, werden verschiedene Analysewerkzeuge genutzt. Dazu gehören analytische Modelle, Simulationen und Experimente auf der Zielsystemhardware. Für jede Kategorie gibt es verschiedene Werkzeuge und Frameworks, die sich auf unterschiedliche Aspekte fokussieren. Dadurch unterstützen diese herkömmlichen Analysemethoden jedoch meistens nur einen der oben genannten Punkte, während die Untersuchung von hybriden und/oder heterogenen Ansätzen und Szenarien nicht ohne weiteres möglich ist. Im Falle von Rettungskräften kommt hinzu, dass die charakteristischen Merkmale hinsichtlich der Bewegung der Knoten und des erzeugten Datenverkehrs während eines Einsatzes ebenfalls nicht modelliert werden können. In dieser Arbeit werden deshalb verschiedene Erweiterungen zu existierenden Analysewerkzeugen sowie neue Werkzeuge zur Analyse und Modelle zur Nachbildung realistischer Rettungsmissionen untersucht und entwickelt. Ziel ist es, die Vorteile existierender Werkzeuge miteinander zu kombinieren, um ganzheitliche, realitätsnahe Untersuchungen von hybriden Protokollen für heterogene Netze zu ermöglichen. Die Kombination erfolgt in Form von gezielten Erweiterungen und der Entwicklung ergänzender komplementärer Werkzeuge unter Verwendung existierender Schnittstellen. Erste Ergebnisse unter Verwendung der entwickelten Werkzeuge zeigen Verbesserungspotentiale bei der Verwendung traditioneller Protokolle und erlauben die Bewertung zusätzlicher Maßnahmen, um die Kommunikation zu verbessern. Szenarien zur Kommunikation von Rettungskräften werden dabei als ein Beispiel verwendet, die Tools sind jedoch nicht auf die Analyse dieses Anwendungsfalls beschränkt. Über die reine Analyse verschiedener existierender Ansätze hinaus bildet die entwickelte Evaluationsumgebung eine Grundlage für die Entwicklung und Verifikation von neuartigen hybriden Protokollen für die entsprechenden Systeme.Communication between participating first responders is essential for efficient coordination of rescue missions and thus allowing to save human lives. Ideally, ad hoc-style communication networks are applied to this as the first responders cannot rely on infrastructure-based communication for two reasons. First, the infrastructure could be damaged by the disastrous event or not be available for economic reasons. Second, even if public infrastructure is available and functional, it might be overloaded by users. To guarantee the robustness and reliability requirements of first responders, the Mobile Ad Hoc Networks (MANETs) have to be combined with an approach to mitigate intermittent connectivity due to otherwise limited connectivity. Delay Tolerant Networks (DTNs) provide such a functionality but introduce additional delay which is problematic. Therefore, intelligent hybrid routing approaches are required to limit the delay introduced by DTN mechanisms. Besides that, the approach should be applicable to heterogeneous networks in terms of communication technologies and device capabilities. This is required for cross multi-agency and volunteer communication but also enables the opportunistic exploitation of any given communication option. To evaluate such systems and develop the corresponding communication protocols, various tools for the analysis are available. This includes analytical models, simulations and real-world experiments on target hardware. In each category a wide set of tools is available already. However, each tool is focused on specific aspects usually and thus does not provide methods to analyze hybrid approaches out of the box. Even if the tools are modular and allow an extension, there are often other tools that are better suited for partial aspects of hybrid systems. In addition to this, few tools exist to model the characteristics of first responder networks. Especially the generalized movement during missions and the generated data traffic are difficult to model and integrate into analyses. The focus of this project is therefore to develop selected extensions to existing analysis and simulation tools as well as additional tools and models to realistically capture the characteristics of first responder networks. The goal is to combine the advantages of existing specialized simulation tools to enable thorough evaluations of hybrid protocols for heterogeneous networks based on realistic assumptions. To achieve this, the tools are extended by specifically designing tools that enable the interaction between tools and new tools that complement the existing analysis capabilities. First results obtained via the resulting toolbox clearly indicate further research directions as well as a potential for protocol enhancements. Besides that, the toolbox was used to evaluate various methods to enhance the connectivity between nodes in first responder networks. First responder scenarios are used as an example here. The toolbox itself is however not limited to this use case. In addition to the analysis of existing approaches for hybrid and heterogeneous networks, the developed toolbox provides a base framework for the development and verification of newly developed protocols for such use cases

Mission-based mobility models for UAV networks

Las redes UAV han atraído la atención de los investigadores durante la última década. Las numerosas posibilidades que ofrecen los sistemas single-UAV aumentan considerablemente al usar múltiples UAV. Sin embargo, el gran potencial del sistema multi-UAV viene con un precio: la complejidad de controlar todos los aspectos necesarios para garantizar que los UAVs cumplen la misión que se les ha asignado. Ha habido numerosas investigaciones dedicadas a los sistemas multi-UAV en el campo de la robótica en las cuales se han utilizado grupos de UAVs para diferentes aplicaciones. Sin embargo, los aspectos relacionados con la red que forman estos sistemas han comenzado a reclamar un lugar entre la comunidad de investigación y han hecho que las redes de UAVs se consideren como un nuevo paradigma entre las redes multi-salto. La investigación de redes de UAVs, de manera similar a otras redes multi-salto, se divide principalmente en dos categorías: i) modelos de movilidad que capturan la movilidad de la red, y ii) algoritmos de enrutamiento. Ambas categorías han heredado muchos algoritmos que pertenecían a las redes MANET, que fueron el primer paradigma de redes multi-salto que atrajo la atención de los investigadores. Aunque hay esfuerzos de investigación en curso que proponen soluciones para ambas categorías, el número de modelos de movilidad y algoritmos de enrutamiento específicos para redes UAV es limitado. Además, en el caso de los modelos de movilidad, las soluciones existentes propuestas son simplistas y apenas representan la movilidad real de un equipo de UAVs, los cuales se utilizan principalmente en operaciones orientadas a misiones, en la que cada UAV tiene asignados movimientos específicos. Esta tesis propone dos modelos de movilidad basados en misiones para una red de UAVs que realiza dos operaciones diferentes. El escenario elegido en el que se desarrollan las misiones corresponde con una región en la que ha ocurrido, por ejemplo, un desastre natural. La elección de este tipo de escenario se debe a que en zonas de desastre, la infraestructura de comunicaciones comúnmente está dañada o totalmente destruida. En este tipo de situaciones, una red de UAVs ofrece la posibilidad de desplegar rápidamente una red de comunicaciones. El primer modelo de movilidad, llamado dPSO-U, ha sido diseñado para capturar la movilidad de una red UAV en una misión con dos objetivos principales: i) explorar el área del escenario para descubrir las ubicaciones de los nodos terrestres, y ii) hacer que los UAVs converjan de manera autónoma a los grupos en los que se organizan los nodos terrestres (también conocidos como clusters). El modelo de movilidad dPSO-U se basa en el conocido algoritmo particle swarm optimization (PSO), considerando los UAV como las partículas del algoritmo, y también utilizando el concepto de valores dinámicos para la inercia, el local best y el neighbour best de manera que el modelo de movilidad tenga ambas capacidades: la de exploración y la de convergencia. El segundo modelo, denominado modelo de movilidad Jaccard-based, captura la movilidad de una red UAV que tiene asignada la misión de proporcionar servicios de comunicación inalámbrica en un escenario de mediano tamaño. En este modelo de movilidad se ha utilizado una combinación del virtual forces algorithm (VFA), de la distancia Jaccard entre cada par de UAVs y metaheurísticas como hill climbing y simulated annealing, para cumplir los dos objetivos de la misión: i) maximizar el número de nodos terrestres (víctimas) que se encuentran bajo el área de cobertura inalámbrica de la red UAV, y ii) mantener la red UAV como una red conectada, es decir, evitando las desconexiones entre UAV. Se han realizado simulaciones exhaustivas con herramientas software específicamente desarrolladas para los modelos de movilidad propuestos. También se ha definido un conjunto de métricas para cada modelo de movilidad. Estas métricas se han utilizado para validar la capacidad de los modelos de movilidad propuestos de emular los movimientos de una red UAV en cada misión.UAV networks have attracted the attention of the research community in the last decade. The numerous capabilities of single-UAV systems increase considerably by using multiple UAVs. The great potential of a multi-UAV system comes with a price though: the complexity of controlling all the aspects required to guarantee that the UAV team accomplish the mission that it has been assigned. There have been numerous research works devoted to multi-UAV systems in the field of robotics using UAV teams for different applications. However, the networking aspects of multi-UAV systems started to claim a place among the research community and have made UAV networks to be considered as a new paradigm among the multihop ad hoc networks. UAV networks research, in a similar manner to other multihop ad hoc networks, is mainly divided into two categories: i) mobility models that capture the network mobility, and ii) routing algorithms. Both categories have inherited previous algorithms mechanisms that originally belong to MANETs, being these the first multihop networking paradigm attracting the attention of researchers. Although there are ongoing research efforts proposing solutions for the aforementioned categories, the number of UAV networks-specific mobility models and routing algorithms is limited. In addition, in the case of the mobility models, the existing solutions proposed are simplistic and barely represent the real mobility of a UAV team, which are mainly used in missions-oriented operations. This thesis proposes two mission-based mobility models for a UAV network carrying out two different operations over a disaster-like scenario. The reason for selecting a disaster scenario is because, usually, the common communication infrastructure is malfunctioning or completely destroyed. In these cases, a UAV network allows building a support communication network which is rapidly deployed. The first mobility model, called dPSO-U, has been designed for capturing the mobility of a UAV network in a mission with two main objectives: i) exploring the scenario area for discovering the location of ground nodes, and ii) making the UAVs to autonomously converge to the groups in which the nodes are organized (also referred to as clusters). The dPSO-U mobility model is based on the well-known particle swarm optimization algorithm (PSO), considering the UAVs as the particles of the algorithm, and also using the concept of dynamic inertia, local best and neighbour best weights so the mobility model can have both abilities: exploration and convergence. The second one, called Jaccard-based mobility model, captures the mobility of a UAV network that has been assigned with the mission of providing wireless communication services in a medium-scale scenario. A combination of the virtual forces algorithm (VFA), the Jaccard distance between each pair of UAVs and metaheuristics such as hill climbing or simulated annealing have been used in this mobility model in order to meet the two mission objectives: i) to maximize the number of ground nodes (i.e. victims) under the UAV network wireless coverage area, and ii) to maintain the UAV network as a connected network, i.e. avoiding UAV disconnections. Extensive simulations have been performed with software tools that have been specifically developed for the proposed mobility models. Also, a set of metrics have been defined and measured for each mobility model. These metrics have been used for validating the ability of the proposed mobility models to emulate the movements of a UAV network in each mission

Understanding the role of mobile ad hoc networks in non-traditional contexts

With the rapid development of short-range wireless technology new venues to apply it in more sophisticated, complex, and dynamic environments have been opened. Nevertheless, the applicability of such technology in nontraditional settings like face-to-face encounters and disaster relief environments, remains unclear. This article describes a research effort aimed to narrow that gap by means of using two non-traditional settings as case studies; face-to-face encounters among unacquainted people and first responders in urban disaster relief environments. Among the results obtained are: a) interactions among unacquainted people may be promoted, though the level of interaction becomes easily constrained due to the current state of RF technology and the design of the experiments, and b) it is feasible to obtain a reliable communication platform for first responders operating in disaster relief missions. These results supports the idea that short-range wireless technology may play both a facilitator and a promoter role in face-to-face contexts, and at least a facilitator role in the case of users co-located in highly dynamic contexts.8th IFIP/IEEE International conference on Mobile and Wireless CommunicationRed de Universidades con Carreras en Informática (RedUNCI