Low-cost, high-resolution, fault-robust position and speed estimation for PMSM drives operating in safety-critical systems

In this paper it is shown how to obtain a low-cost, high-resolution and fault-robust position sensing system for permanent magnet synchronous motor drives operating in safety-critical systems, by combining high-frequency signal injection with binary Hall-effect sensors. It is shown that the position error signal obtained via high-frequency signal injection can be merged easily into the quantization-harmonic-decoupling vector tracking observer used to process the Hall-effect sensor signals. The resulting algorithm provides accurate, high-resolution estimates of speed and position throughout the entire speed range; compared to state-of-the-art drives using Hall-effect sensors alone, the low speed performance is greatly improved in healthy conditions and also following position sensor faults. It is envisaged that such a sensing system can be successfully used in applications requiring IEC 61508 SIL 3 or ISO 26262 ASIL D compliance, due to its extremely high mean time to failure and to the very fast recovery of the drive following Hall-effect sensor faults at low speeds. Extensive simulation and experimental results are provided on a 3.7 kW permanent magnet drive

Multi-Level Pre-Correlation RFI Flagging for Real-Time Implementation on UniBoard

Because of the denser active use of the spectrum, and because of radio telescopes higher sensitivity, radio frequency interference (RFI) mitigation has become a sensitive topic for current and future radio telescope designs. Even if quite sophisticated approaches have been proposed in the recent years, the majority of RFI mitigation operational procedures are based on post-correlation corrupted data flagging. Moreover, given the huge amount of data delivered by current and next generation radio telescopes, all these RFI detection procedures have to be at least automatic and, if possible, real-time. In this paper, the implementation of a real-time pre-correlation RFI detection and flagging procedure into generic high-performance computing platforms based on Field Programmable Gate Arrays (FPGA) is described, simulated and tested. One of these boards, UniBoard, developed under a Joint Research Activity in the RadioNet FP7 European programme is based on eight FPGAs interconnected by a high speed transceiver mesh. It provides up to ~4 TMACs with Altera Stratix IV FPGA and 160 Gbps data rate for the input data stream. Considering the high in-out data rate in the pre-correlation stages, only real-time and go-through detectors (i.e. no iterative processing) can be implemented. In this paper, a real-time and adaptive detection scheme is described. An ongoing case study has been set up with the Electronic Multi-Beam Radio Astronomy Concept (EMBRACE) radio telescope facility at Nan\c{c}ay Observatory. The objective is to evaluate the performances of this concept in term of hardware complexity, detection efficiency and additional RFI metadata rate cost. The UniBoard implementation scheme is described.Comment: 16 pages, 13 figure

SVM-Based Channel Estimation and Data Detection for One-Bit Massive MIMO systems

The use of low-resolution Analog-to-Digital Converters (ADCs) is a practical solution for reducing cost and power consumption for massive Multiple-Input-Multiple-Output (MIMO) systems. However, the severe nonlinearity of low-resolution ADCs causes significant distortions in the received signals and makes the channel estimation and data detection tasks much more challenging. In this paper, we show how Support Vector Machine (SVM), a well-known supervised-learning technique in machine learning, can be exploited to provide efficient and robust channel estimation and data detection in massive MIMO systems with one-bit ADCs. First, the problem of channel estimation for uncorrelated channels is formulated as a conventional SVM problem. The objective function of this SVM problem is then modified for estimating spatially correlated channels. Next, a two-stage detection algorithm is proposed where SVM is further exploited in the first stage. The performance of the proposed data detection method is very close to that of Maximum-Likelihood (ML) data detection when the channel is perfectly known. We also propose an SVM-based joint Channel Estimation and Data Detection (CE-DD) method, which makes use of both the to-be-decoded data vectors and the pilot data vectors to improve the estimation and detection performance. Finally, an extension of the proposed methods to OFDM systems with frequency-selective fading channels is presented. Simulation results show that the proposed methods are efficient and robust, and also outperform existing ones

One-Bit Algorithm Considerations for Sparse PMCW Radar

Phase Modulated Continuous Wave (PMCW) radar an emerging technology for autonomous cars. It is more flexible than the current frequency modulated systems, offering better detection resolution, interference mitigation, and future development opportunities. The issue preventing PMCW adoption is the need for high sample-rate analog to digital converters (ADCs). Due to device limits, a large increase in cost and power consumption occurs for every added resolution bit for a given sampling rate. This thesis explores radar detection techniques for few-bit and 1-bit ADC measurements. 1-bit quantization typically results in poor amplitude estimation, which can limit detections if the target signals are weak. Time Varying quantization Thresholds (TVTs) are a way to preserve that amplitude information. An existing few-bit Fast Iterative Shrinkage Thresholding Algorithm (FISTA) was adapted to use 1-bit TVT quantization. Three test scenarios compared the original FISTA using 1 and 2-bit quantization to the TVT approach. Tests included widely spaced targets, adjacent targets, and high dynamic range targets. Performance metrics included normalized mean squared error (NMSE) of target amplitude estimation and Receiver operating characteristic (ROC) curves for detection accuracy. Results showed the TVT implementation operated over the widest range of SNR values, had the lowest amplitude estimate NMSE at high SNR, and comparable NMSE with 2-bit FISTA at low SNR. There was an $84-93\%$ reduction in NMSE compared to 1-bit FISTA without TVTs. Few-bit FISTA had the best detection rates at specific SNR values, but was more sensitive to noise. AUC values averaged across the full SNR range for TVT FISTA were the most robust, measuring $13-46\%$ higher than 1-bit FISTA and $48-74\%$ higher than 2-bit FISTA. Advisor: Andrew Harm

The influences of environmental conditions on source localisation using a single vertical array and their exploitation through ground effect inversion

The performance of microphone arrays outdoors is influenced by the environmental conditions. Numerical simulations indicate that, while horizontal arrays are hardly affected, direction-of-arrival (DOA) estimation with vertical arrays becomes biased in presence of ground reflections and sound speed gradients. Turbulence leads to a huge variability in the estimates by reducing the ground effect. Ground effect can be exploited by combining classical source localization with an appropriate propagation model (ground effect inversion). Not only does this allow the source elevation and range to be determined with a single vertical array but also it allows separation of sources which can no longer be distinguished by far field localization methods. Furthermore, simulations provide detail of the achievable spatial resolution depending on frequency range, array size and localization algorithm and show a clear advantage of broadband processing. Outdoor measurements with one or two sources confirm the results of the numerical simulations