A novel triangular wave quadrature oscillator without passive components for sinusoidal pulse width modulation DC-AC power conversion

In this study, a low-cost quadrature triangle oscillator using a voltage-controlled closed-loop dual operational amplifier (Op-Amp) architecture is proposed. Unlike other typical designs, this oscillator does not require any passive components. The use of an Op-Amp-based circuit is attractive for a triangle oscillator because it is more cost-effective than a microcontroller-based solution. This is especially true for sinusoidal pulse width modulation (SPWM) DC-AC power conversion applications. The slew-rate restriction of an Op-Amp is a useful characteristic for producing a triangle waveform when seen from the perspective of wave shaping techniques. The MC4558 and the JRC4558D are two examples of dual Op-Amps that are evaluated, contrasted, and described in this article. At supply voltages of +7 V and -7 V, the suggested quadrature triangle oscillator that uses Op-Amps MC4558 and JRC4558D has the same oscillation frequency, which is 63 kHz, as demonstrated by simulation and experimental data. The frequency stability is estimated to be around 0.23%. In addition, the findings from the experiment demonstrate that the proposed oscillator is a practical solution for the SPWM DC-AC power conversion application

Study of voltage controlled oscillator based analog-to-digital converter

A voltage controlled oscillator (VCO) based analog-to-digital converter (ADC) is a time based architecture with a first-order noise-shaping property, which can be implemented using a VCO and digital circuits. This thesis analyzes the performance of VCO-based ADCs in the presence of non idealities such as jitter, nonlinearity, mismatch, and the metastability of D flip-flops. Based on this analysis, design criteria for determining parameters for VCO-based ADCs are described. Further, the study involves the use of VCO based Dual-slope A/D converter and its behaviour under different input voltage level. Graph is plotted between output voltages of the integrator vs. time. Digital circuits like a bit-counter and logic circuits are used for operation mode. A normal VCO model is also done in MATLAB-simulink environment and studied under variable input frequency and corresponding output plots are view

Temporal solitons in optical microresonators

Dissipative solitons can emerge in a wide variety of dissipative nonlinear systems throughout the fields of optics, medicine or biology. Dissipative solitons can also exist in Kerr-nonlinear optical resonators and rely on the double balance between parametric gain and resonator loss on the one hand and nonlinearity and diffraction or dispersion on the other hand. Mathematically these solitons are solution to the Lugiato-Lefever equation and exist on top of a continuous wave (cw) background. Here we report the observation of temporal dissipative solitons in a high-Q optical microresonator. The solitons are spontaneously generated when the pump laser is tuned through the effective zero detuning point of a high-Q resonance, leading to an effective red-detuned pumping. Red-detuned pumping marks a fundamentally new operating regime in nonlinear microresonators. While usually unstablethis regime acquires unique stability in the presence of solitons without any active feedback on the system. The number of solitons in the resonator can be controlled via the pump laser detuning and transitions to and between soliton states are associated with discontinuous steps in the resonator transmission. Beyond enabling to study soliton physics such as soliton crystals our observations open the route towards compact, high repetition-rate femto-second sources, where the operating wavelength is not bound to the availability of broadband laser gain media. The single soliton states correspond in the frequency domain to low-noise optical frequency combs with smooth spectral envelopes, critical to applications in broadband spectroscopy, telecommunications, astronomy and low phase-noise microwave generation.Comment: Includes Supplementary Informatio

Digital PLL for ISM applications

In modern transceivers, a low power PLL is a key block. It is known that with the evolution of technology, lower power and high performance circuitry is a challenging demand. In this thesis, a low power PLL is developed in order not to exceed 2mW of total power consumption. It is composed by small area blocks which is one of the main demands. The blocks that compose the PLL are widely abridged and the final solution is shown, showing why it is employed. The VCO block is a Current-Starved Ring Oscillator with a frequency range from 400MHz to 1.5GHz, with a 300μW to approximately 660μW power consumption. The divider is composed by six TSPC D Flip-Flop in series, forming a divide-by-64 divider. The Phase-Detector is a Dual D Flip-Flop detector with a charge pump. The PLL has less than a 2us lock time and presents a output oscillation of 1GHz, as expected. It also has a total power consumption of 1.3mW, therefore fulfilling all the specifications. The main contributions of this thesis are that this PLL can be applied in ISM applications due to its covering frequency range and low cost 130nm CMOS technology

Doctor of Philosophy

dissertationThis thesis presents the design, fabrication and characterization of a microelectromechanical system (MEMS) based complete wireless microsystem for brain interfacing, with very high quality factor and low power consumption. Components of the neuron sensing system include TiW fixed-fixed bridge resonator, MEMS oscillator based action-potential-to-RF module, and high-efficiency RF coil link for power and data transmissions. First, TiW fixed-fixed bridge resonator on glass substrate was fabricated and characterized, with resonance frequency of 100 - 500 kHz, and a quality factor up to 2,000 inside 10 mT vacuum. The effect of surface conditions on resonator's quality factor was studied with 10s of nm Al2O3 layer deposition with ALD (atomic layer deposition). It was found that MEMS resonator's quality factor decreased with increasing surface roughness. Second, action-potential-to-RF module was realized with MEMS oscillator based on TiW bridge resonator. Oscillation signal with frequency of 442 kHz and phase noise of -84.75 dBc/Hz at 1 kHz offset was obtained. DC biasing of the MEMS oscillator was modulated with neural signal so that the output RF waveform carries the neural signal information. Third, high-efficiency RF coil link for power and data communications was designed and realized. Based on the coupled mode theory (CMT), intermediate resonance coil was introduced and increased voltage transfer efficiency by up to 5 times. Finally, a complete neural interfacing system was demonstrated with board-level integration. The system consists of both internal and external systems, with wireless powering, wireless data transfer, artificial neuron signal generation, neural signal modulation and demodulation, and computer interface displaying restored neuron signal

Resonant Tunnelling Optoelectronic Circuits

Nowadays, most communication networks such as local area networks (LANs), metropolitan area networks (MANs), and wide area networks (WANs) have replaced or are about to replace coaxial cable or twisted copper wire with fiber optical cables. Light-wave communication systems comprise a transmitter based on a visible or near-infrared light source, whose carrier is modulated by the information signal to be transmitted, a transmission media such as an optical fiber, eventually utilizing in-line optical amplification, and a receiver based on a photo-detector that recovers the information signal (Liu, 1996)(Einarsson, 1996). The transmitter consists of a driver circuit along a semiconductor laser or a light emitting diode (LED). The receiver is a signal processing circuit coupled to a photo-detector such as a photodiode, an avalanche photodiode (APD), a phototransistor or a high speed photoconductor that processes the photo-detected signal and recovers the primitive information signa

Semiconductor laser dynamics induced by optical feedback for photonic microwave sensing

As one of the most widely used light sources today, semiconductor lasers (SLs) are an important part of many optical systems, especially for sensing, communications, metrology, and storage applications. SLs have the advantages of small size, easy integration, and miniaturization. The massification of electronic devices has furthered this agenda, allowing the creation of portable systems capable of supporting optical sensing systems. Essentially, SLs are inherently nonlinear devices, in nonlinear systems, the folding and stretching behaviors of variables result in di↵erent dynamical routes. It is worth noting that under the conditions of a stable operation, an SL biased by constant current usually emits laser light with a constant intensity. However, with the introduction of external optical feedback (OF), the laser light can become unstable. SL will undergo from steady state, switching status, to period-one (P1) oscillation by crossing Hopf-bifurcation. In the P1 state, the system produces a modulation of the laser optical output power for the generation of microwave photonics (MWP) signals. In this thesis, we operate SL with OF scheme in P1 dynamics, and found that the proposed system has the great capability to achieve both displacement and absolute distance sensing applications with high resolution and wide measurement range, by using time-frequency information, relaxation oscillation information, and nonlinear dynamic characteristics carried in that SLs emit signals. The contributions of each chapter in this thesis are described in the following: In Chapter 3, we propose an SL with OF set at the P1 dynamics to generate the MWP signal for displacement sensing. Di↵erent from the traditional MWP generation method, the designed laser nonlinear dynamics are used by slightly perturbing the SL source with the help of external feedback light to make the system work in the P1 dynamic state, thereby generating regular microwave oscillation. By using the fourth-order Runge-Kutta method to numerically solve the famous Lang-Kobayashi differential equation, the boundary of di↵erent laser dynamic states is delimited, so that the system can generate stable and sustainable MWP signals in P1 dynamics. A set of parameter selection rules for designing an SL based MWP displacement sensing system is obtained. In addition, a measurement algorithm for recovering the displacement from an MWP sensing signal is developed. By making full use of the sensing information carried in both amplitude and frequency of the MWP signal, displacement sensing with high resolution and high sensitivity can be achieved. Both simulations and experiments are conducted to verify the proposed method and show it is capable of realizing high measurement sensitivity, and high resolution for displacement sensing. In Chapter 4, utilizing the rich nonlinear dynamics of an SL with OF, under the proper controllable system parameters, the system enters the P1 dynamics through Hopf-bifurcation. In the P1 state, the detailed relationship between the relaxation oscillation frequency of MWP signals and external cavity length is studied through solving the Lang-Kobayashi delayed di↵erential equations. The displacement measurement formula is thus obtained. In addition, the relevant signal processing algorithm is developed by considering mode-hopping, frequency-hopping, and sawtooth-like phenomena that occurred in the relaxation oscillation. The displacement measurement can be enhanced in a wider sensing range by fully using the relaxation oscillation frequency relationship. Verification results in simulation and experiment show that the proposed MWP displacement sensing system based on SL with OF contributes to designing a prototype of a compact displacement sensor with wide measurement range and high resolution. In Chapter 5, OF induced switching status between two nonlinear dynamic states (stable and P1 states) is observed in the SL with OF system. Without the need for any electronic or optical modulation devices, the laser intensity can be modulated in a square wave form due to the switching via utilizing the inherent SL dynamics near Hopf-bifurcation boundary. The periodicity in the switching enables us to develop a new approach for long-distance sensing compared to other SL with OF based absolute distance measurement systems and lift the relevant restrictions that existed in the systems. Moreover, the impact of system controllable parameters on the duty cycle of the square wave signals generated was investigated as well, aiming to maintain the proposed system robustly operating at the switching status

Development of a Full-Field Time-of-Flight Range Imaging System

A full-field, time-of-flight, image ranging system or 3D camera has been developed from a proof-of-principle to a working prototype stage, capable of determining the intensity and range for every pixel in a scene. The system can be adapted to the requirements of various applications, producing high precision range measurements with sub-millimetre resolution, or high speed measurements at video frame rates. Parallel data acquisition at each pixel provides high spatial resolution independent of the operating speed. The range imaging system uses a heterodyne technique to indirectly measure time of flight. Laser diodes with highly diverging beams are intensity modulated at radio frequencies and used to illuminate the scene. Reflected light is focused on to an image intensifier used as a high speed optical shutter, which is modulated at a slightly different frequency to that of the laser source. The output from the shutter is a low frequency beat signal, which is sampled by a digital video camera. Optical propagation delay is encoded into the phase of the beat signal, hence from a captured time variant intensity sequence, the beat signal phase can be measured to determine range for every pixel in the scene. A direct digital synthesiser (DDS) is designed and constructed, capable of generating up to three outputs at frequencies beyond 100 MHz with the relative frequency stability in excess of nine orders of magnitude required to control the laser and shutter modulation. Driver circuits were also designed to modulate the image intensifier photocathode at 50 Vpp, and four laser diodes with a combined power output of 320 mW, both over a frequency range of 10-100 MHz. The DDS, laser, and image intensifier response are characterised. A unique method of measuring the image intensifier optical modulation response is developed, requiring the construction of a pico-second pulsed laser source. This characterisation revealed deficiencies in the measured responses, which were mitigated through hardware modifications where possible. The effects of remaining imperfections, such as modulation waveform harmonics and image intensifier irising, can be calibrated and removed from the range measurements during software processing using the characterisation data. Finally, a digital method of generating the high frequency modulation signals using a FPGA to replace the analogue DDS is developed, providing a highly integrated solution, reducing the complexity, and enhancing flexibility. In addition, a novel modulation coding technique is developed to remove the undesirable influence of waveform harmonics from the range measurement without extending the acquisition time. When combined with a proposed modification to the laser illumination source, the digital system can enhance range measurement precision and linearity. From this work, a flexible full-field image ranging system is successfully realised. The system is demonstrated operating in a high precision mode with sub-millimetre depth resolution, and also in a high speed mode operating at video update rates (25 fps), in both cases providing high (512 512) spatial resolution over distances of several metres

Few-molecule reservoir computing experimentally demonstrated with surface enhanced Raman scattering and ion-gating stimulation

Reservoir computing (RC) is a promising solution for achieving low power consumption neuromorphic computing, although the large volume of the physical reservoirs reported to date has been a serious drawback in their practical application. Here, we report the development of a few-molecule RC that employs the molecular vibration dynamics in the para-mercaptobenzoic acid (pMBA) detected by surface enhanced Raman scattering (SERS) with tungsten oxide nanorod/silver nanoparticles (WOx@Ag-NPs). The Raman signals of the pMBA molecules, adsorbed at the SERS active site of WOx@Ag-NPs, were reversibly perturbated by the application of voltage-induced local pH changes in the vicinity of the molecules, and then used to perform RC of pattern recognition and prediction tasks. In spite of the small number of molecules employed, our system achieved good performance, including 95.1% to 97.7% accuracy in various nonlinear waveform transformations and 94.3% accuracy in solving a second-order nonlinear dynamic equation task. Our work provides a new concept of molecular computing with practical computation capabilities.Comment: 22 pages, 4 figure