23 research outputs found

    Protein alignment HW/SW optimizations

    Get PDF
    Biosequence alignment recently received an amazing support from both commodity and dedicated hardware platforms. The limitless requirements of this application motivate the search for improved implementations to boost processing time and capabilities. We propose an unprecedented hardware improvement to the classic Smith-Waterman (S-W) algorithm based on a twofold approach: i) an on-the-fly gap-open/gap-extension selection that reduces the hardware implementation complexity; ii) a pre-selection filter that uses reduced amino-acid alphabets to screen out not-significant sequences and to shorten the S-Witerations on huge reference databases.We demonstrated the improvements w.r.t. a classic approach both from the point of view of algorithm efficiency and of HW performance (FPGA and ASIC post-synthesis analysis)

    Design and Evaluation of a BLAST Ungapped Extension Accelerator, Master\u27s Thesis

    Get PDF
    The amount of biosequence data being produced each year is growing exponentially. Extracting useful information from this massive amount of data is becoming an increasingly difficult task. This thesis focuses on accelerating the most widely-used software tool for analyzing genomic data, BLAST. This thesis presents Mercury BLAST, a novel method for accelerating searches through massive DNA databases. Mercury BLAST takes a streaming approach to the BLAST computation by offloading the performance-critical sections onto reconfigurable hardware. This hardware is then used in combination with the processor of the host system to deliver BLAST results in a fraction of the time of the general-purpose processor alone. Mercury BLAST makes use of new algorithms combined with reconfigurable hardware to accelerate BLAST-like similarity search. An evaluation of this method for use in real BLAST-like searches is presented along with a characterization of the quality of results associated with using these new algorithms in specialized hardware. The primary focus of this thesis is the design of the ungapped extension stage of Mercury BLAST. The architecture of the ungapped extension stage is described along with the context of this stage within the Mercury BLAST system. The design is compact and performs over 20× faster than that of the standard software ungapped extension, yielding close to 50× speedup over the complete software BLAST application. The quality of Mercury BLAST results is essentially equivalent to the standard BLAST results

    A highly parameterized and efficient FPGA-based skeleton for pairwise biological sequence alignment

    Get PDF

    The Mercury System: Exploiting Truly Fast Hardware in Data Mining

    Get PDF
    In many data mining applications, the size of the database is not only extremely large, it is also growing rapidly. Even for relatively simple searches, the time required to move the data off magnetic media, cross the system bus into main memory, copy into processor cache, and then execute code to perform a search is prohibitive. We are building a system in which a significant portion of the data mining task (i.e., the portion that examines the bulk of the raw data) is implemented in fast hardware, close to the magnetic media on which it is stored. Furthermore, this hardware can be replicated allowing mining tasks to be performed in parallel, thus providing further speedup for the overall mining application. In this paper, we describe a general framework under which this can be accomplished and provide initial performance results for a set of applications

    FPGA acceleration of sequence analysis tools in bioinformatics

    Full text link
    Thesis (Ph.D.)--Boston UniversityWith advances in biotechnology and computing power, biological data are being produced at an exceptional rate. The purpose of this study is to analyze the application of FPGAs to accelerate high impact production biosequence analysis tools. Compared with other alternatives, FPGAs offer huge compute power, lower power consumption, and reasonable flexibility. BLAST has become the de facto standard in bioinformatic approximate string matching and so its acceleration is of fundamental importance. It is a complex highly-optimized system, consisting of tens of thousands of lines of code and a large number of heuristics. Our idea is to emulate the main phases of its algorithm on FPGA. Utilizing our FPGA engine, we quickly reduce the size of the database to a small fraction, and then use the original code to process the query. Using a standard FPGA-based system, we achieved 12x speedup over a highly optimized multithread reference code. Multiple Sequence Alignment (MSA)--the extension of pairwise Sequence Alignment to multiple Sequences--is critical to solve many biological problems. Previous attempts to accelerate Clustal-W, the most commonly used MSA code, have directly mapped a portion of the code to the FPGA. We use a new approach: we apply prefiltering of the kind commonly used in BLAST to perform the initial all-pairs alignments. This results in a speedup of from 8Ox to 190x over the CPU code (8 cores). The quality is comparable to the original according to a commonly used benchmark suite evaluated with respect to multiple distance metrics. The challenge in FPGA-based acceleration is finding a suitable application mapping. Unfortunately many software heuristics do not fall into this category and so other methods must be applied. One is restructuring: an entirely new algorithm is applied. Another is to analyze application utilization and develop accuracy/performance tradeoffs. Using our prefiltering approach and novel FPGA programming models we have achieved significant speedup over reference programs. We have applied approximation, seeding, and filtering to this end. The bulk of this study is to introduce the pros and cons of these acceleration models for biosequence analysis tools

    Acceleration of Profile-HMM Search for Protein Sequences in Reconfigurable Hardware - Master\u27s Thesis, May 2006

    Get PDF
    Profile Hidden Markov models are highly expressive representations of functional units, or motifs, conserved across protein sequences. Profile-HMM search is a powerful computational technique that is used to annotate new sequences by identifying occurrences of known motifs in them. With the exponential growth of protein databases, there is an increasing demand for acceleration of such techniques. We describe an accelerator for the Viterbi algorithm using a two-stage pipelined design in which the first stage is implemented in parallel reconfigurable hardware for greater speedup. To this end, we identify algorithmic modifications that expose a high level of parallelism and characterize their impact on the accuracy and performance relative to a standard software implementation. We develop a performance model to evaluate any accelerator design and propose two alternative architectures that recover the accuracy lost by a basic architecture. We compare the performance of the two architectures to show that speedups of up to 3 orders of magnitude may be achieved. We also investigate the use of the Forward algorithm in the first pipeline stage of the accelerator using floating-point arithmetic and report its accuracy and performance

    Design and analysis of an accelerated seed generation stage for BLASTP on the Mercury system - Master\u27s Thesis, August 2006

    Get PDF
    NCBI BLASTP is a popular sequence analysis tool used to study the evolutionary relationship between two protein sequences. Protein databases continue to grow exponentially as entire genomes of organisms are sequenced, making sequence analysis a computationally demanding task. For example, a search of the E. coli. k12 proteome against the GenBank Non-Redundant database takes 36 hours on a standard workstation. In this thesis, we look to address the problem by accelerating protein searching using Field Programmable Gate Arrays. We focus our attention on the BLASTP heuristic, building on work done earlier to accelerate DNA searching on the Mercury platform. We analyze the performance characteristics of the BLASTP algorithm and explore the design space of the seed generation stage in detail. We propose a hardware/software architecture and evaluate the performance of the individual stage, and its effect on the overall BLASTP pipeline running on the Mercury system. The seed generation stage is 13x faster than the software equivalent, and the integrated BLASTP pipeline is predicted to yield a speedup of 50x over NCBI BLASTP. Mercury BLASTP also shows a 2.5x speed improvement over the only other BLASTP-like accelerator for FPGAs while consuming far fewer logic resources

    Parallelization of dynamic programming recurrences in computational biology

    Get PDF
    The rapid growth of biosequence databases over the last decade has led to a performance bottleneck in the applications analyzing them. In particular, over the last five years DNA sequencing capacity of next-generation sequencers has been doubling every six months as costs have plummeted. The data produced by these sequencers is overwhelming traditional compute systems. We believe that in the future compute performance, not sequencing, will become the bottleneck in advancing genome science. In this work, we investigate novel computing platforms to accelerate dynamic programming algorithms, which are popular in bioinformatics workloads. We study algorithm-specific hardware architectures that exploit fine-grained parallelism in dynamic programming kernels using field-programmable gate arrays: FPGAs). We advocate a high-level synthesis approach, using the recurrence equation abstraction to represent dynamic programming and polyhedral analysis to exploit parallelism. We suggest a novel technique within the polyhedral model to optimize for throughput by pipelining independent computations on an array. This design technique improves on the state of the art, which builds latency-optimal arrays. We also suggest a method to dynamically switch between a family of designs using FPGA reconfiguration to achieve a significant performance boost. We have used polyhedral methods to parallelize the Nussinov RNA folding algorithm to build a family of accelerators that can trade resources for parallelism and are between 15-130x faster than a modern dual core CPU implementation. A Zuker RNA folding accelerator we built on a single workstation with four Xilinx Virtex 4 FPGAs outperforms 198 3 GHz Intel Core 2 Duo processors. Furthermore, our design running on a single FPGA is an order of magnitude faster than competing implementations on similar-generation FPGAs and graphics processors. Our work is a step toward the goal of automated synthesis of hardware accelerators for dynamic programming algorithms
    corecore