An Efficient Management System for Wireless Sensor Networks

Wireless sensor networks have garnered considerable attention recently. Networks typically have many sensor nodes, and are used in commercial, medical, scientific, and military applications for sensing and monitoring the physical world. Many researchers have attempted to improve wireless sensor network management efficiency. A Simple Network Management Protocol (SNMP)-based sensor network management system was developed that is a convenient and effective way for managers to monitor and control sensor network operations. This paper proposes a novel WSNManagement system that can show the connections stated of relationships among sensor nodes and can be used for monitoring, collecting, and analyzing information obtained by wireless sensor networks. The proposed network management system uses collected information for system configuration. The function of performance analysis facilitates convenient management of sensors. Experimental results show that the proposed method enhances the alive rate of an overall sensor node system, reduces the packet lost rate by roughly 5%, and reduces delay time by roughly 0.2 seconds. Performance analysis demonstrates that the proposed system is effective for wireless sensor network management

Structural health monitoring of asphalt pavements using smart sensor networks: A comprehensive review

Abstract Early, effective and continuous monitoring allows to reduce costs and to extend life of road infrastructure. For this reason, over the years, more and more efforts have been made to implement more advanced and effective monitoring systems at ever more contained costs, going from impractical manual and destructive methods through automated in vehicle equipment to the most recent wireless sensor network (WSN) embedded into the pavement. The purpose of this paper is to provide a comprehensive, up-to-date critical literature review of wireless sensor networks for pavement health monitoring, considering, also, the experience gained for wired sensor as fundamental point of reference. This work presents both the methodology used to collect and analyse the current bibliography and provides a description and comments fundamental characteristics of wireless sensor networks for pavement monitoring for damage detection purposes, among which energy supply, the detection method, the hardware and network architecture and the performance validation procedures. A brief analysis of other possible complementary applications of smart sensor networks, such as traffic and surface condition monitoring, is provided. Finally, a comment is provided on the gaps and possible directions that future research could follow to allow the extensive use of wireless sensor networks for pavement health condition monitoring

FCS-MBFLEACH: Designing an Energy-Aware Fault Detection System for Mobile Wireless Sensor Networks

Wireless sensor networks (WSNs) include large-scale sensor nodes that are densely distributed over a geographical region that is completely randomized for monitoring, identifying, and analyzing physical events. The crucial challenge in wireless sensor networks is the very high dependence of the sensor nodes on limited battery power to exchange information wirelessly as well as the non-rechargeable battery of the wireless sensor nodes, which makes the management and monitoring of these nodes in terms of abnormal changes very difficult. These anomalies appear under faults, including hardware, software, anomalies, and attacks by raiders, all of which affect the comprehensiveness of the data collected by wireless sensor networks. Hence, a crucial contraption should be taken to detect the early faults in the network, despite the limitations of the sensor nodes. Machine learning methods include solutions that can be used to detect the sensor node faults in the network. The purpose of this study is to use several classification methods to compute the fault detection accuracy with different densities under two scenarios in regions of interest such as MB-FLEACH, one-class support vector machine (SVM), fuzzy one-class, or a combination of SVM and FCS-MBFLEACH methods. It should be noted that in the study so far, no super cluster head (SCH) selection has been performed to detect node faults in the network. The simulation outcomes demonstrate that the FCS-MBFLEACH method has the best performance in terms of the accuracy of fault detection, false-positive rate (FPR), average remaining energy, and network lifetime compared to other classification methods

Joint estimation and localization in sensor networks

This paper addresses the problem of collaborative tracking of dynamic targets in wireless sensor networks. A novel distributed linear estimator, which is a version of a distributed Kalman filter, is derived. We prove that the filter is mean square consistent in the case of static target estimation. When large sensor networks are deployed, it is common that the sensors do not have good knowledge of their locations, which affects the target estimation procedure. Unlike most existing approaches for target tracking, we investigate the performance of our filter when the sensor poses need to be estimated by an auxiliary localization procedure. The sensors are localized via a distributed Jacobi algorithm from noisy relative measurements. We prove strong convergence guarantees for the localization method and in turn for the joint localization and target estimation approach. The performance of our algorithms is demonstrated in simulation on environmental monitoring and target tracking tasks

Joint Estimation and Localization in Sensor Networks

This paper addresses the problem of collaborative tracking of dynamic targets in wireless sensor networks. A novel distributed linear estimator, which is a version of a distributed Kalman filter, is derived. We prove that the filter is mean square consistent in the case of static target estimation. When large sensor networks are deployed, it is common that the sensors do not have good knowledge of their locations, which affects the target estimation procedure. Unlike most existing approaches for target tracking, we investigate the performance of our filter when the sensor poses need to be estimated by an auxiliary localization procedure. The sensors are localized via a distributed Jacobi algorithm from noisy relative measurements. We prove strong convergence guarantees for the localization method and in turn for the joint localization and target estimation approach. The performance of our algorithms is demonstrated in simulation on environmental monitoring and target tracking tasks.Comment: 9 pages (two-column); 5 figures; Manuscript submitted to the 2014 IEEE Conference on Decision and Control (CDC

Reconstructing diffusion fields sampled with a network of arbitrarily distributed sensors

Sensor networks are becoming increasingly prevalent for monitoring physical phenomena of interest. For such wireless sensor network applications, knowledge of node location is important. Although a uniform sensor distribution is common in the literature, it is normally difficult to achieve in reality. Thus we propose a robust algorithm for reconstructing two-dimensional diffusion fields, sampled with a network of arbitrarily placed sensors. The two-step method proposed here is based on source parameter estimation: in the first step, by properly combining the field sensed through well-chosen test functions, we show how Prony's method can reveal locations and intensities of the sources inducing the field. The second step then uses a modification of the Cauchy-Schwarz inequality to estimate the activation time in the single source field. We combine these steps to give a multi-source field estimation algorithm and carry out extensive numerical simulations to evaluate its performance

Smart context-aware QoS-based admission control for biomedical wireless sensor networks

Wireless sensor networks are being used as the enabling technology that helps to support the development of new applications and services targeting the domain of healthcare, in particular, regarding data collection for continuous health monitoring of patients or to help physicians in their diagnosis and further treatment assessment. Therefore, due to the critical nature of both medical data and medical applications, such networks have to satisfy demanding quality of service requirements. Despite the efforts made in the last few years to develop quality of service mechanisms targeting wireless sensor networks and its wide range of applications, the network deployment scenario can severely restrict the network's ability to provide the required performance. Furthermore, the impact of such environments on the network performance is hard to predict and manage due to its random nature. In this way, network planning and management, in complex environments like general or step-down hospital units, is a problem still looking for a solution. In such context, this paper presents a smart context-aware quality of service based admission control method to help engineers, network administrators, and healthcare professionals managing and supervising the admission of new patients to biomedical wireless sensor networks. The proposed method was tested in a small sized hospital. In view of the results achieved during the experiments, the proposed admission control method demonstrated its ability, not only to control the admission of new patients to the biomedical wireless sensor network, but also to find the best location to admit the new patients within the network. By placing the new sensor nodes on the most favourable locations, this method is able to select the network topology in view of mitigating the quality of service provided by the network.Work supported by the Portuguese Foundation for Science and Technology, FCT, PhD Grant SFRH/BD/61278/2009. Miranda was supported by Portuguese funds through the CIDMA - Center for Research and Development in Mathematics and Applications, and the Portuguese Foundation for Science and Technology.info:eu-repo/semantics/publishedVersio

Градиентные свойства теплового поля на фазовой границе высокоскоростной кристаллизации переохлажденного расплава

This paper presents a monitoring method and its implementation as a light-weight end-to-end performance meter for quality-demanding applications in wireless sensor networks. The use of performance feedback information for control and management is also considered. The method is evaluated in a wireless sensor network testbed for healthcare applications."© ACM, YYYY. This is the author's version of the work. It is posted here by permission of ACM for your personal use. Not for redistribution. The definitive version was published in PUBLICATION. QC 120529</p

Optimal coverage multi-path scheduling scheme with multiple mobile sinks for WSNs

Wireless Sensor Networks (WSNs) are usually formed with many tiny sensors which are randomly deployed within sensing field for target monitoring. These sensors can transmit their monitored data to the sink in a multi-hop communication manner. However, the ‘hot spots’ problem will be caused since nodes near sink will consume more energy during forwarding. Recently, mobile sink based technology provides an alternative solution for the long-distance communication and sensor nodes only need to use single hop communication to the mobile sink during data transmission. Even though it is difficult to consider many network metrics such as sensor position, residual energy and coverage rate etc., it is still very important to schedule a reasonable moving trajectory for the mobile sink. In this paper, a novel trajectory scheduling method based on coverage rate for multiple mobile sinks (TSCR-M) is presented especially for large-scale WSNs. An improved particle swarm optimization (PSO) combined with mutation operator is introduced to search the parking positions with optimal coverage rate. Then the genetic algorithm (GA) is adopted to schedule the moving trajectory for multiple mobile sinks. Extensive simulations are performed to validate the performance of our proposed method

A Coverage Monitoring algorithm based on Learning Automata for Wireless Sensor Networks

To cover a set of targets with known locations within an area with limited or prohibited ground access using a wireless sensor network, one approach is to deploy the sensors remotely, from an aircraft. In this approach, the lack of precise sensor placement is compensated by redundant de-ployment of sensor nodes. This redundancy can also be used for extending the lifetime of the network, if a proper scheduling mechanism is available for scheduling the active and sleep times of sensor nodes in such a way that each node is in active mode only if it is required to. In this pa-per, we propose an efficient scheduling method based on learning automata and we called it LAML, in which each node is equipped with a learning automaton, which helps the node to select its proper state (active or sleep), at any given time. To study the performance of the proposed method, computer simulations are conducted. Results of these simulations show that the pro-posed scheduling method can better prolong the lifetime of the network in comparison to similar existing method