Ingress of threshold voltage-triggered hardware trojan in the modern FPGA fabric–detection methodology and mitigation

The ageing phenomenon of negative bias temperature instability (NBTI) continues to challenge the dynamic thermal management of modern FPGAs. Increased transistor density leads to thermal accumulation and propagates higher and non-uniform temperature variations across the FPGA. This aggravates the impact of NBTI on key PMOS transistor parameters such as threshold voltage and drain current. Where it ages the transistors, with a successive reduction in FPGA lifetime and reliability, it also challenges its security. The ingress of threshold voltage-triggered hardware Trojan, a stealthy and malicious electronic circuit, in the modern FPGA, is one such potential threat that could exploit NBTI and severely affect its performance. The development of an effective and efficient countermeasure against it is, therefore, highly critical. Accordingly, we present a comprehensive FPGA security scheme, comprising novel elements of hardware Trojan infection, detection, and mitigation, to protect FPGA applications against the hardware Trojan. Built around the threat model of a naval warship’s integrated self-protection system (ISPS), we propose a threshold voltage-triggered hardware Trojan that operates in a threshold voltage region of 0.45V to 0.998V, consuming ultra-low power (10.5nW), and remaining stealthy with an area overhead as low as 1.5% for a 28 nm technology node. The hardware Trojan detection sub-scheme provides a unique lightweight threshold voltage-aware sensor with a detection sensitivity of 0.251mV/nA. With fixed and dynamic ring oscillator-based sensor segments, the precise measurement of frequency and delay variations in response to shifts in the threshold voltage of a PMOS transistor is also proposed. Finally, the FPGA security scheme is reinforced with an online transistor dynamic scaling (OTDS) to mitigate the impact of hardware Trojan through run-time tolerant circuitry capable of identifying critical gates with worst-case drain current degradation

Simulation for Reliability, Hardware Security, and Ising Computing in VLSI Chip Design

The continued scaling of VLSI circuits has provided a wealth of opportunities andchallenges to the VLSI circuit design area. Both these challenges and opportunities, however,require new simulation tools that can enable their solution or exploitation as classicalmethods typically dealt with problem domains with smaller scales or less complexity. Inthis dissertation, simulation methods are presented to address the emerging VLSI designtopics of Electromigration induced aging and Ising computing and are then applied to theapplication areas of hardware security and graph partitioning respectively.The Electromigration aging effect in VLSI circuits is a long-term reliability issueaffecting current carrying metal wires leading to IR drop degradation. Typically, simpleanalytical equations can determine a wire’s effective age or if it will be affected by the EMaging effect at all. However, these classical methods are overly conservative and can lead toover design or unnecessary design iterations. Furthermore, it is expected that the EM agingeffect will become more severe in future Integrated Cirucits (ICs) due to increasing currentdensities and the prevalance of polycrystaline copper atom structures seen at small wiredimensions. For this reason, more comprehensive simulation techniques that can efficientlysimulate the EM effect with less conservative results can help mitigate overdesign andincrease design margins while reducing design iterations.The area of Hardware Security is becoming increasingly important as the chipsupply chain becomes more globalized and the integrity of chips becomes more diffiuclt toverify. Utilizing the accurate simulation techniques for EM, we can utilize this reliabilityeffect to demonstrate how a reliability based attack could be perpatrated. Furthermore, wecan utilize this aging effect as a defense mechanism to help us validate the integrity of anIC and detect counterfeit chips in the component supply chain market.Ising computing is an emerging method of solving combinatorial optimization problemsby simulating the interactions of so-called spin glasses and their interactions. Borrowingconcepts from quantum computing, this methods mimics the quantum interaction betweenspin glasses in such a way that finding a ground state of these spin glass models leadsto the solution of a particular problem. In this dissertation, effective methods of simulatingthe spin glass interactions using General Purpose Graphics Processing Units (GPGPUs)and finding their ground state are developed.In addition to the GPU based Ising model simulations, important combinatorialproblems can be mapped to the Ising model. In this dissertation the Ising solver is appliedto graph partitioning which can be utilized in VLSI design and many other domains as well.Specifically, solvers for the maxcut problem and the balanced min-cut partitioning problemare developed

Flash-based security primitives: Evolution, challenges and future directions

Over the last two decades, hardware security has gained increasing attention in academia and industry. Flash memory has been given a spotlight in recent years, with the question of whether or not it can prove useful in a security role. Because of inherent process variation in the characteristics of flash memory modules, they can provide a unique fingerprint for a device and have thus been proposed as locations for hardware security primitives. These primitives include physical unclonable functions (PUFs), true random number generators (TRNGs), and integrated circuit (IC) counterfeit detection. In this paper, we evaluate the efficacy of flash memory-based security primitives and categorize them based on the process variations they exploit, as well as other features. We also compare and evaluate flash-based security primitives in order to identify drawbacks and essential design considerations. Finally, we describe new directions, challenges of research, and possible security vulnerabilities for flash-based security primitives that we believe would benefit from further exploration

Leveraging CMOS Aging for Efficient Microelectronics Design

Aging is known to impact electronic systems affecting performance and reliability. However, it has been shown that it also brings benefits for power saving and area optimization. This paper presents highlights of those benefits and further shows how aging effects can be leveraged by novel methods to contribute towards improving hardware oriented security and reliability of electronic circuits. We have demonstrated static power reduction in complex circuits from IWLS05 benchmark suite, reaching a noticeable 7S% of reduction in ten years of operation. In hardware oriented security, a novel aging sensor has been proposed for detection of recycled ICs, measuring discharge time Tdv of the virtual power (VV dd ) network in power-gated designs. This sensor utilizes discharge time of VV dd network through leakage current that is much more sensitive to aging than path delay, exhibiting up to 15.7X increment in 10 years. Furthermore, we show how frequency degradation caused by aging is used for online prediction of remaining useful lifetime (RUL) of electronic circuits. Results show an average RUL prediction deviation of less than 0.1 years. This methodology provides node calculations rather than a mean time to failure (MTTF) of the population. The set of techniques that are presented in this paper takes advantage of aging effects, having a positive impact in various aspects of microelectronic systems

Techniques for Improving Security and Trustworthiness of Integrated Circuits

The integrated circuit (IC) development process is becoming increasingly vulnerable to malicious activities because untrusted parties could be involved in this IC development flow. There are four typical problems that impact the security and trustworthiness of ICs used in military, financial, transportation, or other critical systems: (i) Malicious inclusions and alterations, known as hardware Trojans, can be inserted into a design by modifying the design during GDSII development and fabrication. Hardware Trojans in ICs may cause malfunctions, lower the reliability of ICs, leak confidential information to adversaries or even destroy the system under specifically designed conditions. (ii) The number of circuit-related counterfeiting incidents reported by component manufacturers has increased significantly over the past few years with recycled ICs contributing the largest percentage of the total reported counterfeiting incidents. Since these recycled ICs have been used in the field before, the performance and reliability of such ICs has been degraded by aging effects and harsh recycling process. (iii) Reverse engineering (RE) is process of extracting a circuit’s gate-level netlist, and/or inferring its functionality. The RE causes threats to the design because attackers can steal and pirate a design (IP piracy), identify the device technology, or facilitate other hardware attacks. (iv) Traditional tools for uniquely identifying devices are vulnerable to non-invasive or invasive physical attacks. Securing the ID/key is of utmost importance since leakage of even a single device ID/key could be exploited by an adversary to hack other devices or produce pirated devices. In this work, we have developed a series of design and test methodologies to deal with these four challenging issues and thus enhance the security, trustworthiness and reliability of ICs. The techniques proposed in this thesis include: a path delay fingerprinting technique for detection of hardware Trojans, recycled ICs, and other types counterfeit ICs including remarked, overproduced, and cloned ICs with their unique identifiers; a Built-In Self-Authentication (BISA) technique to prevent hardware Trojan insertions by untrusted fabrication facilities; an efficient and secure split manufacturing via Obfuscated Built-In Self-Authentication (OBISA) technique to prevent reverse engineering by untrusted fabrication facilities; and a novel bit selection approach for obtaining the most reliable bits for SRAM-based physical unclonable function (PUF) across environmental conditions and silicon aging effects

Advances in Microfluidic Technologies for Energy and Environmental Applications

Microfluidics have aroused a new surge of interest in recent years in environmental and energy areas, and inspired novel applications to tackle the worldwide challenges for sustainable development. This book aims to present readers with a valuable compendium of significant advances in applying the multidisciplinary microfluidic technologies to address energy and environmental problems in a plethora of areas such as environmental monitoring and detection, new nanofluid application in traditional mechanical manufacturing processes, development of novel biosensors, and thermal management. This book will provide a new perspective to the understanding of the ever-growing importance of microfluidics