Design and Implementation of Area and Power Efficient Low Power VLSI Circuits through Simple Byte Compression with Encoding Technique

Transition activity is one of the major factors for power dissipation in Low power VLSI circuits due to charging and discharging of internal node capacitances. Power dissipation is reduced through minimizing the transition activity by using proper coding techniques. In this paper Multi coding technique is implemented to reduce the transition activity up to 58.26%. Speed of data transmission basically depends on the number of bits transmitted through bus. When handling data for large applications huge storage space is required for processing, storing and transferring information. Data compression is an algorithm to reduce the number of bits required to represent information in a compact form. Here simple byte compression technique is implemented to achieve a lossless data compression. This compression algorithm also reduces the encoder computational complexity when handling huge bits of information. Simple byte compression technique improves the compression ratio up to 62.5%. As a cumulative effort of Simple byte compression with Multi coding techniques minimize area and power dissipation in low power VLSI circuits

Comparative Analysis of Spatio and Viterbi Encoding and Decoding Techniques in Hardware Description Language

The paper focuses on the design and synthesis of hardware chip for Spatio and Viterbi encoding and decoding techniques. Both techniques are used for digital data encoding and decoding in transmitter and receiver respectively. These techniques are used for error control coding found in convolution codes. Spatio coding is also used to eliminate crosstalk among interconnect wires, thereby reducing delay. The encoded data is in packet form may be of 2018;N2019; bits. Data is decoded at different clock pluses at which it is encoded. A comparative analysis is done for hardware parameter, timing parameters and device utilization. Design is implemented in Xilinx 14.2 VHDL software, and functional simulation was carried out in Modelsim 10.1 b, student edition. Hardware parameters such as size cost and timings are extracted from the design code

Error Control Schemes for On-chip Communication Links: the energy-reliability trade-off

On-chip interconnection networks for future systems on chip (SoC) will have to deal with the increasing sensitivity of global wires to noise sources such as crosstalk or power supply noise. Hence, transient delay and logic faults are likely to reduce the reliability of across-chip communication. Given the reduced power budgets for SoCs, in this paper, we develop solutions for combined energy minimization and communication reliability control. Redundant bus coding is proved to be an effective technique for trading off energy against reliability, so that the most efficient scheme can be selected to meet predefined reliability requirements in a low signal-to-noise ratio regime. We model on-chip interconnects as noisy channels and evaluate the impact of two error recovery schemes on energy efficiency: correction at the receiver stage versus retransmission of corrupted data. The analysis is performed in a realistic SoC setting, and holds both for shared communication resources and for peer-to-peer links in a network of interconnects. We provide SoC designers with guidelines for the selection of energy efficient error-control schemes for communication architectures

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

A novel low-swing voltage driver design and the analysis of its robustness to the effects of process variation and external disturbances

arket forces are continually demanding devices with increased functionality/unit area; these demands have been satisfied through aggressive technology scaling which, unfortunately, has impacted adversely on the global interconnect delay subsequently reducing system performance. Line drivers have been used to mitigate the problems with delay; however, these have a large power consumption. A solution to reducing the power dissipation of the drivers is to use lower supply voltages. However, by adopting a lower power supply voltage, the performance of the line drivers for global interconnects is impaired unless low-swing signalling techniques are implemented. Low-swing signalling techniques can provide high speed signalling with low power consumption and hence can be used to drive global on-chip interconnect. Most of the proposed low-swing signalling schemes are immune to noise as they have a good SNR. However, they tend to have a large penalty in area and complexity as they require additional circuitry such as voltage generators and low-Vth devices. Most of the schemes also incorporate multiple Vdd and reference voltages which increase the overall circuit complexity. A diode-connected driver circuit has the best attributes over other low-swing signalling techniques in terms of low power, low delay, good SNR and low area overhead. By incorporating a diode-connected configuration at the output, it can provide high speed signalling due to its high driving capability. However, this configuration also has its limitations as it has issues with its adaptability to process variations, as well as an issue with leakage currents. To address these limitations, two novel driver schemes have been designed, namely, nLVSD and mLVSD, which, additionally, have improvements in performance and power consumption. Comparisons between the proposed schemes with the existing diode-connected driver circuits (MJ and DDC) showed that the nLVSD and mLVSD drivers have approximately 46% and 50% less delay. The name MJ originates from the driver’s designer called Juan A. Montiel-Nelson, while DDC stands for dynamic diode-connected. In terms of power consumption, the nLVSD and mLVSD drivers also produce 43% and 7% improvement. Additionally, the mLVSD driver scheme is the most robust as its SNR is 14 to 44% higher compared to other diode-connected driver circuits. On the other hand, the nLVSD driver has 6% lower SNR compared to the MJ driver, even though it is 19% more robust than the DDC driver. However, since its SNR is still above 1, its improved performance and reduced power consumption, as well other advantages it has over other diode-connected driver circuits can compensate for this limitation. Regarding the robustness to external disturbances, the proposedmdriver circuits are more robust to crosstalk effects as the nLVSD and mLVSD drivers are approximately 35% and 7% more robust than other diode-connected drivers. Furthermore, the mLVSD driver is 5%, 33% and 47% more tolerant to SEUs compared to the nLVSD, MJ and DDC driver circuits respectively, whilst the MJ and DDC drivers are 26% and 40% less tolerant to SEUs iii compared to the nLVSD circuit. A comparison between the four schemes was also undertaken in the presence of ±3σ process and voltage (PV) variations. The analysis indicated that both proposed driver schemes are more robust than other diode-connected driver schemes, namely, the MJ and DDC driver circuits. The MJ driver scheme deviates approximately 18% and 35% more in delay and power consumption compared to the proposed schemes. The DDC driver has approximately 20% and 57% more variations in delay and power consumption in comparison to the proposed schemes. In order to further improve the robustness of the proposed driver circuits against process variation and environmental disturbances, they were further analysed to identify which process variables had the most impact on circuit delay and power consumption, as well as identifying several design techniques to mitigate problems with environmental disturbances. The most significant process parameters to have impact on circuit delay and power consumption were identified to be Vdd, tox, Vth, s, w and t. The impact of SEUs on the circuit can be reduced by increasing the bias currents whilst design methods such as increasing the interconnect spacing can help improve the circuit robustness against crosstalk. Overall it is considered that the proposed nLVSD and mLVSD circuits advance the state of the art in driver design for on-chip signalling applications.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Design and modelling of variability tolerant on-chip communication structures for future high performance system on chip designs

The incessant technology scaling has enabled the integration of functionally complex System-on-Chip (SoC) designs with a large number of heterogeneous systems on a single chip. The processing elements on these chips are integrated through on-chip communication structures which provide the infrastructure necessary for the exchange of data and control signals, while meeting the strenuous physical and design constraints. The use of vast amounts of on chip communications will be central to future designs where variability is an inherent characteristic. For this reason, in this thesis we investigate the performance and variability tolerance of typical on-chip communication structures. Understanding of the relationship between variability and communication is paramount for the designers; i.e. to devise new methods and techniques for designing performance and power efficient communication circuits in the forefront of challenges presented by deep sub-micron (DSM) technologies. The initial part of this work investigates the impact of device variability due to Random Dopant Fluctuations (RDF) on the timing characteristics of basic communication elements. The characterization data so obtained can be used to estimate the performance and failure probability of simple links through the methodology proposed in this work. For the Statistical Static Timing Analysis (SSTA) of larger circuits, a method for accurate estimation of the probability density functions of different circuit parameters is proposed. Moreover, its significance on pipelined circuits is highlighted. Power and area are one of the most important design metrics for any integrated circuit (IC) design. This thesis emphasises the consideration of communication reliability while optimizing for power and area. A methodology has been proposed for the simultaneous optimization of performance, area, power and delay variability for a repeater inserted interconnect. Similarly for multi-bit parallel links, bandwidth driven optimizations have also been performed. Power and area efficient semi-serial links, less vulnerable to delay variations than the corresponding fully parallel links are introduced. Furthermore, due to technology scaling, the coupling noise between the link lines has become an important issue. With ever decreasing supply voltages, and the corresponding reduction in noise margins, severe challenges are introduced for performing timing verification in the presence of variability. For this reason an accurate model for crosstalk noise in an interconnection as a function of time and skew is introduced in this work. This model can be used for the identification of skew condition that gives maximum delay noise, and also for efficient design verification

Throughput-Centric Wave-Pipelined Interconnect Circuits for Gigascale Integration

The central thesis of this research is that VLSI interconnect design strategies should shift from using global wires that can support only a single binary transition during the latency of the line to global wires that can sustain multiple bits traveling simultaneously along the length of the line. It is shown in this thesis that such throughput-centric multibit transmission can be achieved by wave-pipelining the interconnects using repeaters. A holistic analysis of wave-pipelined interconnect circuits, along with the full-custom optimization of these circuits, is performed in this research. With the help of models and methodologies developed in this thesis, the design rules for repeater insertion are crafted to simultaneously optimize performance, power, and area of VLSI global interconnect networks through a simultaneous application of voltage scaling and wire sizing. A qualitative analysis of latency, throughput, signal integrity, power dissipation, and area is performed that compares the results of design optimizations in this work to those of conventional global interconnect circuits. The objective of this thesis is to study the circuit- and system-level opportunities of voltage scaling, wire sizing, and repeater insertion in wave-pipelined global interconnect networks that are implemented in deep submicron technologies.Ph.D.Committee Chair: Davis, Jeffrey; Committee Member: Kohl, Paul; Committee Member: Meindl, James; Committee Member: Swaminathan, Madhavan; Committee Member: Wills, D. Scot

Exploration and Design of High Performance Variation Tolerant On-Chip Interconnects

Siirretty Doriast

Signaling in 3-D integrated circuits, benefits and challenges

Three-dimensional (3-D) or vertical integration is a design and packaging paradigm that can mitigate many of the increasing challenges related to the design of modern integrated systems. 3-D circuits have recently been at the spotlight, since these circuits provide a potent approach to enhance the performance and integrate diverse functions within amulti-plane stack. Clock networks consume a great portion of the power dissipated in a circuit. Therefore, designing a low-power clock network in synchronous circuits is an important task. This requirement is stricter for 3-D circuits due to the increased power densities. Synchronization issues can be more challenging for 3-D circuits since a clock path can spread across several planes with different physical and electrical characteristics. Consequently, designing low power clock networks for 3-D circuits is an important issue. Resonant clock networks are considered efficient low-power alternatives to conventional clock distribution schemes. These networks utilize additional inductive circuits to reduce power while delivering a full swing clock signal to the sink nodes. In this research, a design method to apply resonant clocking to synthesized clock trees is proposed. Manufacturing processes for 3-D circuits include some additional steps as compared to standard CMOS processes which makes 3-D circuits more susceptible to manufacturing defects and lowers the overall yield of the bonded 3-D stack. Testing is another complicated task for 3-D ICs, where pre-bond test is a prerequisite. Pre-bond testability, in turn, presents new challenges to 3-D clock network design primarily due to the incomplete clock distribution networks prior to the bonding of the planes. A design methodology of resonant 3-D clock networks that support wireless pre-bond testing is introduced. To efficiently address this issue, inductive links are exploited to wirelessly transmit the clock signal to the disjoint resonant clock networks. The inductors comprising the LC tanks are used as the receiver circuit for the links, essentially eliminating the need for additional circuits and/or interconnect resources during pre-bond test. Recent FPGAs are quite complex circuits which provide reconfigurablity at the cost of lower performance and higher power consumption as compared to ASIC circuits. Exploiting a large number of programmable switches, routing structures are mainly responsible for performance degradation in FPAGs. Employing 3-D technology can providemore efficient switches which drastically improve the performance and reduce the power consumption of the FPGA. RRAM switches are one of the most promising candidates to improve the FPGA routing architecture thanks to their low on-resistance and non-volatility. Along with the configurable switches, buffers are the other important element of the FPGAs routing structure. Different characteristics of RRAM switches change the properties of signal paths in RRAM-based FPGAs. The on resistance of RRAMswitches is considerably lower than CMOS pass gate switches which results in lower RC delay for RRAM-based routing paths. This different nature in critical path and signal delay in turn affect the need for intermediate buffers. Thus the buffer allocation should be reconsidered. In the last part of this research, the effect of intermediate buffers on signal propagation delay is studied and a modified buffer allocation scheme for RRAM-based FPGA routing path is proposed