Multi fingered robot hand in industrial robot application using tele-operation

This research focuses on the working and development of wireless robotic hand system. In this research previously developed models have been studied. After analysis of those models, a better approach has been presented in this research. The objective of this research is to design and develop a tele-operated robotic hand system. The robotic hand is intended for providing solutions to industrial problems like robot reprogramming, industrial automation and safety of the workers working in hostile environments. The robotic hand system works in the master slave configuration where Bluetooth is being used as the communication channel for the tele-operation. The master is a glove, embedded with sensors to detect the movement of every joint present in the hand, which a human operator can wear. This joint movement is transferred to the slave robotic hand which will mimic the movement of human operator. The robotic hand is a multi fingered dexterous and anthropomorphic hand. All the fingers are capable of performing flexion, extension, abduction, adduction and hence circumduction. A new combination of pneumatic muscles and springs has been used for the actuation purpose. As a result, this combination reduces the size of the robotic hand by decreasing the number of pneumatic muscles used. The pneumatic muscles are controlled by the opening and closing of solenoid valves. A novel technique has been used in the robotic hand for tendon routing, which gives the ability of independence to all finger joints. The heart of all the control mechanism of the system is mbed microcontroller. The designed system was tested at different module levels. The results show the successful establishment of communication between master and slave at a rate of 10 packets per second, which was sufficient for smooth motion of the system. The amount of torque produced at all the joints in the robotic hand has been presented in this research. The posture tests have been performed in which two fingers were actuated which followed the master. This system has achieved motion of fingers without any tendon coupling problem. The system is able to replace the human industrial workers performing dexterous tasks

Hubungan di antara pengaturan kerja fleksibel dan prestasi pekerja dalam kalangan ejen insurans wanita

Ejen insurans merupakan jurujual pertengahan bagi syarikat insurans di mana mereka memainkan peranan penting dalam memberi khidmat nasihat kewangan (Hannah, 2011). Ejen insurans bekerja berdasarkan persekitaran pengaturan kerja yang fleksibel di mana mereka boleh menyediakan jadual waktu bekerja sendiri. Sebahagian daripada mereka bertemu dengan pelanggan pada waktu perniagaan siang hari, sementara yang lain pula membuat kertas kerja dan menyediakan konsultasi untuk pelanggan pada waktu petang. Kebanyakan mereka bekerja selama 40 jam seminggu dan ada juga beberapa ejen yang bekerja lebih lama daripada 40 jam (Hannah, 2011). Prestasi ejen insurans sangat penting untuk mengekalkan jenama produk insurans. Penilaian terhadap prestasi di kalangan ejen insurans biasanya bergantung kepada kejayaan atau kegagalan mencapai sasaran penjualan (Insurance Agent Job Overview, 2019). Proses menjual produk insurans memerlukan masa kerana mereka perlu mendekati pelanggan sebanyak mungkin dan ketersediaan waktu bekerja yang tidak tetap

Nanoparticle shape effects on squeezed MHD flow of water based Cu, Al2O3 and SWCNTs over a porous sensor surface

Impact of nanoparticle shape on the squeezed MHD flow of water based metallic nanoparticles over a porous sensor surface in the presence of heat source has been investigated. In distinctly most paramount studies, three distinctive forms of nanoparticle shapes are employed into account, i.e. sphere ðm ¼ 3:0Þ, cylinder ðm ¼ 6:3698Þ and laminar ðm ¼ 16:1576Þ. The controlling partial differential equations (PDEs) are regenerated into ordinary differential equations (ODEs) by manipulating consistent conformity conversion and it is determined numerically by handling Runge Kutta Fehlberg method with shooting technique. It is noticed that the solid volume fraction and nanoparticle shape have powerful outputs in squeezing flow phenomena, the sphere shape nanoparticle in Cu – water and cylindrical shape in SWCNTs-water in the presence of magnetic field along with thermal radiation energy has better improvement on heat transfer as compared with the other nanoparticle shapes in different flow regimes

Segmented capacitance tomography electrodes: a design and experimental verifications

A segmented capacitance tomography system for real-time imaging of multiphase flows is developed and pre-sented in this work. The earlier research shows that the electrical tomography (ECT) system is applicable in flow visualization (image reconstruction). The acquired concentration profile ob-tained from capacitance measurements able to imaged liquid and gas mixture in pipelines meanwhile the system development is designed to attach on a vessel. The electrode plates which act as the sensor previously has been assembled and fixed on the pipeline, thus it causes obscurity for the production to have any new process installation in the future. Therefore, a segmented electrode sensor offers a new design and idea on ECT system which is portable to be assembled in different diameter sizes of pipeline, and it is flexible to apply in any number due to different size of pipeline without the need of redesigning the sensing module. The new ap-proach of this sensing module contains the integration intelligent electrode sensing circuit on every each of electrode sensors. A microcontroller unit and data acquisition (DAQ) system has been integrated on the electrode sensing circuit and USB technology was applied into the data acquisition system making the sensor able to work independently. Other than that the driven guard that usually placed between adjacent measuring electrodes and earth screen has been embedded on the segmented electrode sensor plates. This eliminates the cable noise and the electrode, so the signal conditioning board can be expanded according to pipe diameter

The Anthropomorphic Hand Assessment Protocol (AHAP)

The progress in the development of anthropomorphic hands for robotic and prosthetic applications has not been followed by a parallel development of objective methods to evaluate their performance. The need for benchmarking in grasping research has been recognized by the robotics community as an important topic. In this study we present the Anthropomorphic Hand Assessment Protocol (AHAP) to address this need by providing a measure for quantifying the grasping ability of artificial hands and comparing hand designs. To this end, the AHAP uses 25 objects from the publicly available Yale-CMU-Berkeley Object and Model Set thereby enabling replicability. It is composed of 26 postures/tasks involving grasping with the eight most relevant human grasp types and two non-grasping postures. The AHAP allows to quantify the anthropomorphism and functionality of artificial hands through a numerical Grasping Ability Score (GAS). The AHAP was tested with different hands, the first version of the hand of the humanoid robot ARMAR-6 with three different configurations resulting from attachment of pads to fingertips and palm as well as the two versions of the KIT Prosthetic Hand. The benchmark was used to demonstrate the improvements of these hands in aspects like the grasping surface, the grasp force and the finger kinematics. The reliability, consistency and responsiveness of the benchmark have been statistically analyzed, indicating that the AHAP is a powerful tool for evaluating and comparing different artificial hand designs

Intuitive Hand Teleoperation by Novice Operators Using a Continuous Teleoperation Subspace

Human-in-the-loop manipulation is useful in when autonomous grasping is not able to deal sufficiently well with corner cases or cannot operate fast enough. Using the teleoperator's hand as an input device can provide an intuitive control method but requires mapping between pose spaces which may not be similar. We propose a low-dimensional and continuous teleoperation subspace which can be used as an intermediary for mapping between different hand pose spaces. We present an algorithm to project between pose space and teleoperation subspace. We use a non-anthropomorphic robot to experimentally prove that it is possible for teleoperation subspaces to effectively and intuitively enable teleoperation. In experiments, novice users completed pick and place tasks significantly faster using teleoperation subspace mapping than they did using state of the art teleoperation methods.Comment: ICRA 2018, 7 pages, 7 figures, 2 table

AER Neuro-Inspired interface to Anthropomorphic Robotic Hand

Address-Event-Representation (AER) is a communication protocol for transferring asynchronous events between VLSI chips, originally developed for neuro-inspired processing systems (for example, image processing). Such systems may consist of a complicated hierarchical structure with many chips that transmit data among them in real time, while performing some processing (for example, convolutions). The information transmitted is a sequence of spikes coded using high speed digital buses. These multi-layer and multi-chip AER systems perform actually not only image processing, but also audio processing, filtering, learning, locomotion, etc. This paper present an AER interface for controlling an anthropomorphic robotic hand with a neuro-inspired system.Unión Europea IST-2001-34124 (CAVIAR)Ministerio de Ciencia y Tecnología TIC-2003-08164-C03-02Ministerio de Ciencia y Tecnología TIC2000-0406-P4- 0

An AER-Based Actuator Interface for Controlling an Anthropomorphic Robotic Hand

Bio-Inspired and Neuro-Inspired systems or circuits are a relatively novel approaches to solve real problems by mimicking the biology in its efficient solutions. Robotic also tries to mimic the biology and more particularly the human body structure and efficiency of the muscles, bones, articulations, etc. Address-Event-Representation (AER) is a communication protocol for transferring asynchronous events between VLSI chips, originally developed for neuro-inspired processing systems (for example, image processing). Such systems may consist of a complicated hierarchical structure with many chips that transmit data among them in real time, while performing some processing (for example, convolutions). The information transmitted is a sequence of spikes coded using high speed digital buses. These multi-layer and multi-chip AER systems perform actually not only image processing, but also audio processing, filtering, learning, locomotion, etc. This paper present an AER interface for controlling an anthropomorphic robotic hand with a neuro-inspired system.Unión Europea IST-2001-34124 (CAVIAR)Ministerio de Ciencia y Tecnología TIC-2003-08164-C03-0

Planning hand-arm grasping motions with human-like appearance

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksFinalista de l’IROS Best Application Paper Award a la 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, ICROS.This paper addresses the problem of obtaining human-like motions on hand-arm robotic systems performing pick-and-place actions. The focus is set on the coordinated movements of the robotic arm and the anthropomorphic mechanical hand, with which the arm is equipped. For this, human movements performing different grasps are captured and mapped to the robot in order to compute the human hand synergies. These synergies are used to reduce the complexity of the planning phase by reducing the dimension of the search space. In addition, the paper proposes a sampling-based planner, which guides the motion planning ollowing the synergies. The introduced approach is tested in an application example and thoroughly compared with other state-of-the-art planning algorithms, obtaining better results.Peer ReviewedAward-winningPostprint (author's final draft