14 research outputs found

    General Model for Infrastructure Multi-channel Wireless LANs

    Full text link
    In this paper we develop an integrated model for request mechanism and data transmission in multi-channel wireless local area networks. We calculated the performance parameters for single and multi-channel wireless networks when the channel is noisy. The proposed model is general it can be applied to different wireless networks such as IEEE802.11x, IEEE802.16, CDMA operated networks and Hiperlan\2.Comment: 11 Pages, IJCN

    Contention Resolution Queues for Massive Machine Type Communications in LTE

    Get PDF
    In this paper, we address the challenge of high device density performing simultaneous transmissions by proposing and evaluating a solution to efficiently handle the initial access contention for highly dense LTE networks. We present the implementation of a tree-splitting algorithm in the access procedure of LTE, which is capable to cope with high number of simultaneous arrivals. Based on simulations we show a feasible implementation capable to achieve, under certain network configuration conditions, up to 85% average access delay reduction and 40% reduction on the average energy consumption, while maintaining a consistently low blocking probability, regardless of the number of initial simultaneous access attempts

    LPDQ: a self-scheduled TDMA MAC protocol for one-hop dynamic lowpower wireless networks

    Get PDF
    Current Medium Access Control (MAC) protocols for data collection scenarios with a large number of nodes that generate bursty traffic are based on Low-Power Listening (LPL) for network synchronization and Frame Slotted ALOHA (FSA) as the channel access mechanism. However, FSA has an efficiency bounded to 36.8% due to contention effects, which reduces packet throughput and increases energy consumption. In this paper, we target such scenarios by presenting Low-Power Distributed Queuing (LPDQ), a highly efficient and low-power MAC protocol. LPDQ is able to self-schedule data transmissions, acting as a FSA MAC under light traffic and seamlessly converging to a Time Division Multiple Access (TDMA) MAC under congestion. The paper presents the design principles and the implementation details of LPDQ using low-power commercial radio transceivers. Experiments demonstrate an efficiency close to 99% that is independent of the number of nodes and is fair in terms of resource allocation.Peer ReviewedPostprint (author’s final draft

    A cross-layer architecture to improve mobile host rate performance and to solve unfairness problem in WLANs

    Get PDF
    The evolution of the Internet has been mainly promoted in recent years by the emergence and pro- liferation of wireless access networks towards a global ambient and pervasive network accessed from mobile devices. These new access networks have introduced new MAC layers independently of the legacy "wire- oriented" protocols that are still at the heart of the pro- tocol stacks of the end systems. This principle of isola- tion and independence between layers advocated by the OSI model has its drawbacks of maladjustment between new access methods and higher-level protocols built on the assumption of a wired Internet. In this paper, we introduce and deliver solutions for several pathologi- cal communication behaviors resulting from the malad- justment between WLAN MAC and higher layer stan- dard protocols such as TCP/IP and UDP/IP. Specially, based on an efficient analytical model for WLANs band- width estimation, we address in this paper the two fol- lowing issues: 1) Performance degradation due to the lack of flow control between the MAC and upper layer resulting in potential MAC buffer overflow; 2) Unfair bandwidth share issues between various type of flows. We show how these syndromes can be efficiently solved from neutral "cross layer" interactions which entail no changes in the considered protocols and standards

    Weighted-DESYNC and Its Application to End-to-End Throughput Fairness in Wireless Multihop Network

    Get PDF
    The end-to-end throughput of a routing path in wireless multihop network is restricted by a bottleneck node that has the smallest bandwidth among the nodes on the routing path. In this study, we propose a method for resolving the bottleneck-node problem in multihop networks, which is based on multihop DESYNC (MH-DESYNC) algorithm that is a bioinspired resource allocation method developed for use in multihop environments and enables fair resource allocation among nearby (up to two hops) neighbors. Based on MH-DESYNC, we newly propose weighted-DESYNC (W-DESYNC) as a tool artificially to control the amount of resource allocated to the specific user and thus to achieve throughput fairness over a routing path. Proposed W-DESYNC employs the weight factor of a link to determine the amount of bandwidth allocated to a node. By letting the weight factor be the link quality of a routing path and making it the same across a routing path via Cucker-Smale flocking model, we can obtain throughput fairness over a routing path. The simulation results show that the proposed algorithm achieves throughput fairness over a routing path and can increase total end-to-end throughput in wireless multihop networks

    Towards zero-power wireless machine-to-machine networks

    Get PDF
    This thesis aims at contributing to overcome two of the main challenges for the deployment of M2M networks in data collection scenarios for the Internet of Things: the management of massive numbers of end-devices that attempt to get access to the channel; and the need to extend the network lifetime. In order to solve these challenges, two complementary strategies are considered. Firstly, the thesis focuses on the design, analysis and performance evaluation of MAC protocols that can handle abrupt transitions in the traffic load and minimize the energy consumption devoted to communications. And secondly, the use of energy harvesting (EH) is considered in order to provide the network with unlimited lifetime. To this end, the second part of the thesis focuses on the design and analysis of EH-aware MAC protocols. While the Frame Slotted-ALOHA (FSA) protocol has been traditionally adopted in star topology networks for data collection, results show that FSA-based protocols lack of scalability and present synchronization problems as the network density increases. Indeed, the frame length of FSA must be adjusted to the number of contenders, which may be complex to attain in dense networks with large and dynamic number of end-devices. In order to overcome these issues, a tree splitting-based random access protocol, referred to as Low Power Contention Tree-based Access (LP-CTA), is proposed in the first part of this thesis. In LP-CTA, the frame length can be very short and fixed, which facilitates synchronization and provides better network scalability than FSA. While LP-CTA uses data slots for contention, it is possible to use short access requests in minislots, where collisions are resolved using tree splitting, and avoid the contention in data. Since these minislots can be much shorter than the duration of a data packet, the performance can be improved. The Low Power Distributed Queuing (LP-DQ) protocol proposed in this thesis is based on this idea. LP-DQ combines tree splitting with the logic of two distributed queues that manage the contention resolution and the collision-free data transmission. Results show that LP-DQ outperforms LP-CTA and FSA in terms of delay and energy efficiency, and it relaxes the need to know the size of the network and adapts smoothly to any change in the number of end-devices. The approach of LP-DQ is convenient when the messages transmitted by each end-device fit in one single slot, however, if the end-devices generate long messages that have to be fragmented, it is better to add a reservation mechanism in order to boost the performance. In this sense, the LPR-DQ protocol is proposed as an extension of LP-DQ where the concept of reservation is integrated to allow the end-devices reserve as many collision-free slots as needed. The second part of the thesis is devoted to the integration of the MAC layer with the use of energy harvesting. The variability and fluctuations of the harvested energy is considered for the design of EH-aware MAC protocols and three performance metrics are proposed: the probability of delivery, the data delivery ratio and the time efficiency. Previous works on data collection networks with EH focus on DFSA. In this thesis, the EH-CTA protocol is proposed as an adaptation of LP-CTA that takes the energy harvesting process into account. Results show that EH-CTA outperforms DFSA if the energy threshold for an end-device to become active is properly configured. In addition, while DFSA needs to adapt the frame length dynamically, EH-CTA uses a fixed frame length, thus facilitating scalability and synchronization. Finally, the EH-RDFSA and EH-DQ protocols are proposed for scenarios where data must be fragmented. EH-RDFSA is a combination of RFSA and DFSA, and EH-DQ is an extension of LPR-DQ.Esta tesis contribuye a resolver dos de los retos para el despliegue de redes M2M en escenarios de recolección de datos para el Internet de las Cosas: la gestión del acceso al canal de un número masivo de dispositivos; y la necesidad de extender la vida de la red. Para resolverlos se consideran dos estrategias complementarias. En primer lugar, se centra en el diseño, el análisis y la evaluación de protocolos MAC que pueden manejar transiciones abruptas de tráfico y reducen el consumo de energía. Y en segundo lugar, se considera el uso de mecanismos de captura de energía (Energy Harvesters, EH) para ofrecer un tiempo de vida ilimitado de la red. Con este fin, la segunda parte de la tesis se centra en el diseño y el análisis de protocolos MAC de tipo "EH-aware". Mientras que Frame Slotted-ALOHA (FSA) ha sido tradicionalmente adoptado en aplicaciones de recolección de datos, los resultados muestran que FSA presenta problemas de escalabilidad y sincronización cuando aumenta la densidad de la red. De hecho, la longitud de trama de FSA se debe ajustar según sea el número de dispositivos, lo cual puede ser difícil de estimar en redes con un número elevado y dinámico de dispositivos. Para superar estos problemas, en esta tesis se propone un protocolo de acceso aleatorio basado en "tree-splitting" denominado Low Power Contention Tree-based Access (LP-CTA). En LP-CTA, la longitud de trama puede ser corta y constante, lo cual facilita la sincronización y proporciona mejor escalabilidad. Mientras que LP-CTA utiliza paquetes de datos para la contienda, es posible utilizar solicitudes de acceso en mini-slots, donde las colisiones se resuelven utilizando "tree-splitting", y evitar la contención en los datos. Dado que estos mini-slots pueden ser mucho más cortos que la duración de un slot de datos, el rendimiento de LP-CTA puede ser mejorado. El protocolo Low Power Distributed Queuing (LP-DQ) propuesto en esta tesis se basa en esta idea. LP-DQ combina "tree-splitting" con la lógica de dos colas distribuidas que gestionan la resolución de la contienda en la solicitud de acceso y la transmisión de datos libre de colisiones. Los resultados demuestran que LP-DQ mejora LP-CTA y FSA en términos de retardo y eficiencia energética, LP-DQ no requiere conocer el tamaño de la red y se adapta sin problemas a cualquier cambio en el número de dispositivos. LP-DQ es conveniente cuando los mensajes transmitidos por cada dispositivo caben en un único slot de datos, sin embargo, si los dispositivos generan mensajes largos que requieren fragmentación, es mejor añadir un mecanismo de reserva para aumentar el rendimiento. En este sentido, el protocolo LPR-DQ se propone como una extensión de LP-DQ que incluye un mecanismo de reserva para permitir que cada dispositivo reserve el número de slots de datos según sea el número de fragmentos por mensaje. La segunda parte de la tesis está dedicada a la integración de la capa MAC con el uso de "Energy Harvesters". La variabilidad y las fluctuaciones de la energía capturada se consideran para el diseño de protocolos MAC de tipo "EH-aware" y se proponen tres métricas de rendimiento: la probabilidad de entrega, el "Data Delivery Ratio" y la eficiencia temporal. Los trabajos previos en redes de recolección de datos con EH se centran principalmente en DFSA. En esta tesis, el protocolo EH-CTA se propone como una adaptación de LP-CTA que tiene en cuenta el proceso de captura de energía. Los resultados muestran que EH-CTA supera DFSA si el umbral de energía para que un dispositivo se active está configurado correctamente. Además, mientras que en DFSA se necesita adaptar la longitud de trama de forma dinámica, EH-CTA utiliza una longitud de trama fija, facilitando así la escalabilidad y la sincronización. Por último, se proponen los protocolos EH-RDFSA y EH-DQ para escenarios en los que los datos deben ser fragmentados. EH-RDFSA es una combinación de RFSA y DFSA, y EH-DQ es una extensión de LPR-DQ.Aquesta tesi contribueix a resoldre dos dels reptes per al desplegament de xarxes M2M en escenaris de recol·lecció de dades per a l'Internet de les Coses: la gestió de l'accés al canal d'un nombre massiu de dispositius; i la necessitat d'extendre la vida de la xarxa. Per resoldre'ls es consideren dues estratègies complementàries. En primer lloc, es centra en el disseny, l'anàlisi i l'avaluació de protocols MAC que poden manegar transicions abruptes de trànsit i redueixen el consum d'energia. I en segon lloc, es considera l'ús de mecanismes de captura d'energia (Energy Harvesters, EH) per a oferir un temps de vida il·limitat de la xarxa. Amb aquesta finalitat, la segona part de la tesi es centra en el disseny i l'anàlisi de protocols MAC de tipus "EH-aware".Mentre que Frame Slotted-ALOHA (FSA) ha estat tradicionalment adoptat en aplicacions de recol·lecció de dades, els resultats mostren que FSA presenta problemes d'escalabilitat i sincronització quan augmenta la densitat de la xarxa. De fet, la longitud de trama de FSA s'ha d'ajustar segons sigui el nombre de dispositius, la qual cosa pot ser difícil d'estimar en xarxes amb un nombre elevat i dinàmic de dispositius. Per superar aquests problemes, en aquesta tesi es proposa un protocol d'accés aleatori basat en "tree-splitting" denominat Low Power Contention Tree-based Access (LP-CTA). En LP-CTA, la longitud de trama pot ser curta i constant, la qual cosa facilita la sincronització i proporciona millor escalabilitat.Mentre que LP-CTA utilitza paquets de dades per a la contenció, és possible utilitzar sol·licituds d'accés a mini-slots, on les col·lisions es resolen utilitzant "tree-splitting", i evitar la contenció a les dades. Atès que aquests mini-slots poden ser molt més curts que la durada d'un slot de dades, el rendiment de LP-CTA pot ser millorat. El protocol Low Power Distributed Queuing (LP-DQ) proposat en aquesta tesi es basa en aquesta idea. LP-DQ combina "tree-splitting" amb la lògica de dues cues distribuïdes que gestionen la resolució de la contenció en la sol·licitud d'accés i la transmissió de dades lliure de col·lisions. Els resultats demostren que LP-DQ millora LP-CTA i FSA en termes de retard i eficiència energètica, LP-DQ no requereix conèixer la mida de la xarxa i s'adapta sense problemes a qualsevol canvi en el nombre de dispositius.LP-DQ és convenient quan els missatges transmesos per cada dispositiu caben en un únic slot de dades, però, si els dispositius generen missatges llargs que requereixen fragmentació, és millor afegir un mecanisme de reserva per augmentar el rendiment. En aquest sentit, el protocol LPR-DQ es proposa com una extensió de LP-DQ que inclou un mecanisme de reserva per a permetre que cada dispositiu reservi el nombre de slots de dades segons sigui el nombre de fragments per missatge.La segona part de la tesi està dedicada a la integració de la capa MAC amb l'ús de "Energy Harvesters". La variabilitat i les fluctuacions de l'energia capturada es consideren per al disseny de protocols MAC de tipus "EH-aware" i es proposen tres mètriques de rendiment: la probabilitat d'entrega, el "Data Delivery Ratio" i l'eficiència temporal.Els treballs previs en xarxes de recol·lecció de dades amb EH se centren principalment en DFSA. En aquesta tesi, el protocol EH-CTA es proposa com una adaptació de LP-CTA que té en compte el procés de captura d'energia. Els resultats mostren que EH-CTA supera DFSA si el llindar d'energia perquè un dispositiu s'activi s'ajusta correctament. A més, mentre que a DFSA es necessita adaptar la longitud de trama de forma dinàmica, EH-CTA utilitza una longitud de trama fixa, facilitant així l'escalabilitat i la sincronització. Finalment, es proposen els protocols EH-RDFSA i EH-DQ per a escenaris en els quals les dades han de ser fragmentades. EH-RDFSA és una combinació de RFSA i DFSA, i EH-DQ és una extensió de LPR-DQ.Postprint (published version

    Quality of service differentiation for multimedia delivery in wireless LANs

    Get PDF
    Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

    Cross-layer design and optimization of medium access control protocols for wlans

    Get PDF
    This thesis provides a contribution to the field of Medium Access Control (MAC) layer protocol design for wireless networks by proposing and evaluating mechanisms that enhance different aspects of the network performance. These enhancements are achieved through the exchange of information between different layers of the traditional protocol stack, a concept known as Cross-Layer (CL) design. The main thesis contributions are divided into two parts. The first part of the thesis introduces a novel MAC layer protocol named Distributed Queuing Collision Avoidance (DQCA). DQCA behaves as a reservation scheme that ensures collision-free data transmissions at the majority of the time and switches automatically to an Aloha-like random access mechanism when the traffic load is low. DQCA can be enriched by more advanced scheduling algorithms based on a CL dialogue between the MAC and other protocol layers, to provide higher throughput and Quality of Service (QoS) guarantees. The second part of the thesis explores a different challenge in MAC layer design, related to the ability of multiple antenna systems to offer point-to-multipoint communications. Some modifications to the recently approved IEEE 802.11n standard are proposed in order to handle simultaneous multiuser downlink transmissions. A number of multiuser MAC schemes that handle channel access and scheduling issues and provide mechanisms for feedback acquisition have been presented and evaluated. The obtained performance enhancements have been demonstrated with the help of both theoretical analysis and simulation obtained results
    corecore